Potential formation and high density plasma production on the tandem mirror GAMMA 10

GAMMA 10 experiments have advanced in high density experiments after the last EPS Workshop where we reported high density plasma production by using an ion cyclotron range of frequency heating at a high harmonic frequency and neutral beam injection in the central cell. Recently a high density plasma was obtained with much improved reproducibility than before and without degradation of diamagnetic signal. The high density plasma was attained by adjusting the spacing of the conducting plates installed in the anchor transition regions. Dependencies of particle confinement time, ion energy confinement time and plasma confining potential on plasma density were obtained for the first time in the high density region. Presented at 5th Workshop “Role of Electric Fields in Plasma Confinement and Exhaust”, Montreus, Switzerland, June 23–24, 2002.     

Numerical analysis of turbulent structure in compound meandering open channel by algebraic Reynolds stress model

The turbulent flow in a compound meandering channel with a rectangular cross section is one of the most complicated turbulent flows, because the flow behaviour is influenced by several kinds of forces, including centrifugal forces, pressure‐driven forces and shear stresses generated by momentum transfer between the main channel and the flood plain. Numerical analysis has been performed for the fully developed turbulent flow in a compound meandering open‐channel flow using an algebraic Reynolds stress model. The boundary‐fitted coordinate system is introduced as a method for coordinate transformation in order to set the boundary conditions along the complicated shape of the meandering open channel. The turbulence model consists of transport equations for turbulent energy and dissipation, in conjunction with an algebraic stress model based on the Reynolds stress transport equations. With reference to the pressure–strain term, we have made use of a modified pressure–strain term. The boundary condition of the fluctuating vertical velocity is set to zero not only for the free surface, but also for computational grid points next to the free surface, because experimental results have shown that the fluctuating vertical velocity approaches zero near the free surface. In order to examine the validity of the present numerical method and the turbulent model, the calculated results are compared with experimental data measured by laser Doppler anemometer. In addition, the compound meandering open channel is clarified somewhat based on the calculated results. As a result of the analysis, the present algebraic Reynolds stress model is shown to be able to reasonably predict the turbulent flow in a compound meandering open channel. Copyright © 2005 John Wiley & Sons, Ltd.     

Visible-light-sensitive photocatalytic reaction on chromium-containing mesoporous silica: selective partial oxidation of propane with molecular oxygen

The photocatalytic reactivities of chromium-containing mesoporous silica molecular sieves (Cr-HMS) under visible light irradiation have been investigated. Cr-HMS involves tetrahedral chromium oxide (Cr-oxide) moieties which are highly dispersed and incorporated in the framework of molecular sieve with two terminal Cr=O groups. In the presence of propane with molecular oxygen, a partial oxidation proceeded under visible light irradiation to produce acetone and acrolein, with high selectivity, while a complete oxidation proceeded under UV light irradiation mainly to produce CO₂. The charge-transfer excited state of the tetrahedral Cr-oxide moieties plays a significant role in the photocatalytic reactions.     

Developing a hybrid emulsion polymerization system to synthesize Fe3O4/polystyrene latexes with narrow size distribution and high magnetite content

A hybrid emulsion polymerization was formulated for synthesizing Fe₃O₄/polystyrene composite latex. This system, containing binary droplets that are magnetic (Mag)‐droplets with a diameter of 100–200 nm and styrene (St)‐droplets with a diameter of 3–4 μm, was obtained by mixing Mag‐miniemulsion and St‐macroemulsion. With extremely low surfactants concentration (?critical micelle concentration, CMC), the nucleated loci are selectively controlled in the Mag‐droplets, as the result of smaller droplet size and larger surface ratio. Both water‐soluble potassium persulfate (KPS) and oil‐soluble 2,2′‐azobis(2‐isobutyronitrile) was adopted to initiate the polymerization. In the presence of KPS, magnetic polystyrene latices with particles size of 60–200 nm, narrow size distribution, and high magnetite content (86 wt % measured by TGA) were attained successfully. The synthesized magnetic Fe₃O_4/polystyrene latices assembled into well‐ordered hexagonal structure in the surface of a carbon supported copper grid. The influence of various parameters on various aspects of the as‐synthesized Fe₃O₄/polystyrene was investigated in detail: type of initiator on composite morphology, feed ratio of Mag‐miniemulsion and St‐macroemulsion on magnetite content, and hydrophobic agent or amount of surfactant on size and size distribution. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5285–5295, 2007     

Toeplitz operators associated with analytic crossed products II (invariant subspaces and factorization)

In [16], we introduced the notion of Toeplitz operators associated with analytic crossed products. In this paper, we study the structure of invariant subspaces with respect to the analytic crossed products. We also investigate the inner-outer factorization problems for analytic Toeplitz operators, the factorization problem for non-negative Toeplitz operators and Szegö's infimum problem.This work was supported in part by a Grant-in-Aid for Scientific Research from the Japanese Ministry of Education.     

Intake of different chemical species of dietary arsenic by the japanese,and their blood and urinary arsenic levels

We calculated the intake of each chemical species of dietary arsenic by typical Japanese, and determined urinary and blood levels of each chemical species of arsenic. The mean total arsenic intake by 35 volunteers was 195±235 (15.8-1039) μg As day^?1, composed of 76% trimethylated arsenic (TMA), 17.3% inorganic arsenic (As_i), 5.8% dimethylated arsenic (DMA), and 0.8% monomethylated arsenic (MA): the intake of TMA was the largest of all the measured species. Intake of As_i characteristically and invariably occurred in each meal. Of the intake of As_i, 45-75% was methylated in vivo to form MA and DMA, and excreted in these forms into urine. The mean measured urinary total arsenic level in 56 healthy volunteers was 129±92.0 μg As dm^?3, composed of 64.6% TMA, 26.7% DMA, 6.7% As_i and 2.2% MA. The mean blood total arsenic level in the 56 volunteers was 0.73±0.57 μg dl^?1, composed of 73% TMA, 14% DMA and 9.6% As_i. The urinary TMA levels proved to be significantly correlated with the whole-blood TMA levels (r = 0.376; P<0.01).