Addition–fragmentation chain transfer: Molecular weight distributions and retardation in the system methyl methacrylate/methyl α‐(bromomethyl)acrylate

A detailed investigation of addition–fragmentation chain transfer (AFCT) in the free‐radical polymerization of methyl methacrylate (MMA) in the presence of methyl α‐(bromomethyl)acrylate (MBMA) was carried out to elucidate mechanistic details with efficient macromonomer synthesis as an underlying goal. Advanced modeling techniques were used in connection with the experimental work. Curve fitting of simulated and experimental molecular weight distributions with respect to the rate coefficient for addition of propagating radicals to MBMA (k_add) over 60–120 °C resulted in E_add = 21.7 kJ mol^?1 and A_add = 2.18 × 10⁶ M^?1 s^?1 and a very weak temperature dependence of the chain‐transfer constant (E_add ≈ E_p). The rate coefficient for fragmentation of adduct radicals at 60 °C was estimated as k_f ≈ 39 s^?1 on the basis of experimental data of the MMA conversion and the concentration of 2‐carbomethoxy‐2‐propenyl end groups. The approach developed is generic and can be applied to any AFCT system in which copolymerization does not occur and in which the resulting unsaturated end groups do not undergo further reactions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2640–2650, 2004     

Enantioselective spiro ene-carbocyclization of 1,6-enynes catalyzed by tropos rhodium(I) complex with skewphos ligand

A tropos rhodium(I) complex having skewphos ligand is shown to be a highly enantioselective catalyst for asymmetric ene-type carbocyclization of 1,6-enynes with tri-substituted olefins to control quaternary stereogenic centers or spiro-rings.     

Basic study of the gelation of dimethacrylate‐type crosslinking agents

An investigation was made of the gelation of dimethacrylate‐type crosslinking agents in view of an application for separation media. The study mainly centered on a crosslinking agent, glycerol dimethacrylate (GDMA), which is relatively hydrophilic because of a hydroxyl group in the middle of its structure. The gelation of GDMA was compared with that of other hydrophobic crosslinking agents such as ethylene glycol dimethacrylate and 1,6‐hexanediol dimethacrylate. The diluents used in the study were toluene, toluene with methanol, and cyclohexanol. The gelation was observed in real time with a charge coupled device camera and dynamic light scattering (DLS). Also, the separated dry gels were extensively characterized with scanning electron microscopy, BET (N₂ absorption and desorption isotherm), and Fourier transform infrared. DLS analysis showed a stronger molecular interaction of GDMA gelation in toluene, whereas this interaction was much weaker in an alcoholic solvent such as toluene with methanol or cyclohexanol. This indicated that GDMA gelation might proceed through hydrogen bonding as well as a crosslinking reaction of vinyl groups. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 949–958, 2006     

Pressure response of Raman spectra of water and its implication to the change in hydrogen bond interaction

In situ Raman spectroscopic measurements of water in the region of OH vibration were conducted up to 0.4 GPa at 23 and 52 degrees C. The frequencies of the decomposed OH stretching bands initially decreased with increasing pressure, reached a minimum at 0.15 GPa and increased up to 0.3 GPa and then decreased, which corresponds to the variations of the strength of hydrogen bonding. This variation was observed at 23 degrees C, but not at 52 degrees C, which suggests a change in pressure dependence on the hydrogen bond interaction between these two temperatures. Based on the equilibration model between hydrogen-bonded and nonhydrogen-bonded molecules, the present experimental results indicate that the pressure variation of the viscosity depends on the ratio of hydrogen-bonded molecules, rather than the strength of hydrogen bonding between molecules.     

Enzyme-less amperometric biosensor for l-ascorbate using poly-l-histidine-copper complex as an alternative biocatalyst

A poly-l-histidine(PLH)-copper(II) complex can be used as an alternative biocatalyst in an O(2) detection-type amperometric enzyme-less l-ascorbate (AsA) sensor. The PLH-Cu(II) membrane was simply prepared by entrapping the PLH in polyacrylamide gel and subsequent treatment of the gel with CuCl(2) solution. This enzyme-less biosensor can be used over a relatively wide pH region from 4 to 11 and enables precise determination of AsA (RSD less than 3%, n=10) at pH 7.0. The fundamental performance characteristics (sensitivity, response time, and linear range) of this PLH-Cu(II)-based sensor is comparable to those of a native ascorbate oxidase-based sensor. Unfortunately, the selectivity is inherently rather low and, as a result, the response was degraded in the presence of higher concentrations (more than mM order) of quinones. However, reducing sugars caused no interference and the sensor could be used to detect AsA in some fruits and drinks. This enzyme-less sensor has excellent stability for at least 3 months of repeated analysis (more than 300 samples) without loss of ordinal activity.     

Vacancy ion-exclusion chromatography of carboxylic acids on a weakly acidic cation-exchange resin

In this preliminary study, a new approach to ion-exclusion chromatography is proposed to overcome the relatively poor conductivity detection response which occurs in ion-exclusion chromatography when acids are added to the eluent in order to improve peak shape. This approach, termed vacancy ion-exclusion chromatography, requires the sample to be used as eluent and a sample of water to be injected onto a weakly acidic cation-exchange column (TSKgel OApak-A). Vacancy peaks for each of the analytes appear at the retention times of these analytes. Highly sensitive conductivity detection is possible and sharp, well-shaped peaks are produced, leading to efficient separations. Retention times were found to be affected by the concentration of the analytes in the eluent, and also by the presence of an organic modifier such as methanol in the eluent. Detection limits for oxalic, formic, acetic, propionic, butyric and valeric acids were 0.1, 0.2, 0.3, 0.3, 0.4 and 0.5 microM, respectively, and linear ranges for some acids extended over two orders of magnitude. Precision values for retention times were 0.21% and for peak areas were <1.90%. The vacancy ion-exclusion chromatography method was found to give detection responses four to 10 times higher than conventional ion-exclusion chromatography using sulfuric acid eluent and two to five times higher than conventional ion-exclusion chromatography using benzoic acid eluent.     

Photo-switchable ion and enzyme sensors. Photoinduced potentiometric response of glassy carbon electrode coated with polymer or polymer/enzyme dual membrane

Photo-switchable ion and enzyme sensors were fabricated by the use of glassy carbon electrode coated with nonactindoped or enzyme modified poly(vinyl chloride) (PVC) membranes. The ion sensor with nonactin-doped PVC membrane, which contained spirobenzopyran as the photosensitive dye, exhibited a potentiometric photoresponse to NH4+ ion in the solution. The dynamic range of the NH4+ ion sensor was 10(-7)--10(-3) M. Urea, adenosine, and asparagine sensors were prepared by coating the surface of the NH4+-ion sensor with urease, adenosine deaminase, and asparaginase membranes, respectively. These enzyme sensors could be used for determining the substrates at the micro mole level. The performance characteristics of these sensors were compared with those previously prepared membrane electrode sensors.     

Changeable reactivity of ketyl radicals derived from 2-bromomethyl-2-(3-butenyl)benzocyclic-1-alkanones depending on electron transfer conditions employed

Photoinduced electron transfer reaction of 2-bromomethyl-2-(3-butenyl)benzocyclic-1-alkanones with amines afforded 5-exo radical cyclization products while electron transfer reaction with samarium diiodide produced cyclopropanols.