Preparation of poly(ether ketone)s derived from 2,5‐furandicarboxylic acid via nucleophilic aromatic substitution polymerization

From the viewpoint of the suppression of the petroleum consumption, aromatic poly(ether ketone)s (PEKs) were prepared by the nucleophilic aromatic substitution polymerization of 2,5‐bis(4‐fluorobenzoyl)furan (BFBF) synthesized from biomass and aromatic bisphenols. The model reaction of BFBF and p‐methoxyphenol revealed that BFBF possessed enough reactivity for the nucleophilic aromatic substitution reactions. The polymerizations of BFBF and aromatic bisphenols afforded high molecular weight polymers with good yields in N‐methylpyrrolidone and diphenyl sulfone for several hours. The longer polymerization time brought about the formation of insoluble parts in any solvents and reduction of molecular weight. The obtained PEKs were thermoplastics and exhibited good thermal stability, mechanical properties, and chemical resistance comparable to common high‐performance polymers. The thermal properties were tunable with the structure of bisphenols. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3094–3101     

Reductive Cross‐Coupling of Conjugated Arylalkenes and Aryl Bromides with Hydrosilanes by Cooperative Palladium/Copper Catalysis

A method for the reductive cross‐coupling of conjugated arylalkenes and aryl bromides with hydrosilanes by cooperative palladium/copper catalysis was developed, thus resulting in the highly regioselective formation of various 1,1‐diarylalkanes, including a biologically active molecule. Under the applied reaction conditions, high levels of functional‐group tolerance were observed, and the reductive cross‐coupling of internal alkynes with aryl bromides afforded trisubstituted alkenes.     

Anionic polymerization of Lewis acid-activated methyl methacrylate by enamines

A novel ionic polymerization of methyl methacrylate (MMA) with a series of enamines (1) in the presence of methylaluminum bis(2,6-di-tert-butylphenoxide) (2) was examined. Both nucleophile (1) and electrophile (2) are indispensable for the present polymerization, in which (1) acts as initiator and (2) as activator. MMA polymerization proceeded smoothly in toluene at or below room temperature (r.t.) in the presence of 1 and 2 (1 ∼ 4 mol %, respectively), went to completion within 1 h, and afforded syndiotactic-rich PMMA with molecular weight distribution (M_w/M_n) in the 1.1 ∼ 1.4 range. The number-average molecular weight (M_n) of the polymer was significantly higher than that calculated from the feed ratio of 1 to the monomer, indicating low initiating efficiency. Kinetic studies coupled with isolation of an intermediate species proved that the real monomeric species involved in both initiation and propagation was a complex of MMA with 2. The effects of the concentrations of 1, 2, and MMA as well as the temperature of polymerization were also examined. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3671–3679, 1999     

Chemometric techniques on inorganic elements composition for the determination of the geographic origin of Welsh onions.

Techniques to determine the producing country of Welsh onions (Allium fistulosum L.) were developed by using 216 samples from Japan and from Anchu Shandgon, Shanghai and Amoy Fjian in China. Twelve elements (Na, P, K, Ca, Mg. Mn, Fe, Cu, Zn, Sr, Ba, Al, Co, Ni, Rb, Mo, Cd, Cs, La, Ce, Tl and Pb) contained in Welsh onions were determined. In order to determining whether Welsh onions originate in Japan or in China, linear discriminant analysis (LDA) and soft independent modeling of class analogy (SIMCA) were performed, using concentrations of 20 elements excluding Al and Pb in 22 elements. In LDA for two-group discrimination modeled on Welsh onions from Japan and China, 103 samples used for modeling were classified 95% correctly, and 89 other samples were predicted 94% correctly. As the average of predictions by SIMCA modeled on samples selected by 10 times of random selections, 192 samples, including the 103 samples used for modeling, were predicted 96% correctly. In discriminations by combined LDA and SIMCA, all 81 samples produced in Japan were correctly judged to be Japanese ones, and only 8 samples out of 111 samples produced in China were not correctly judged to be Chinese ones.     

Estimation of discrimination errors in the technique for determining the geographic origin of onions by mineral composition: interlaboratory study

Techniques to determine the geographic origin of foods have been developed for various agricultural and fishery products, and they have used various principles. Some of these techniques are already in use for checking the authenticity of the labeling. Many are based on multielement analysis and chemometrics. We have developed such a technique to determine the geographic origin of onions (Allium cepa L.). This technique, which determines whether an onion is from outside Japan, is designed for onions labeled as having a geographic origin of Hokkaido, Hyogo, or Saga, the main onion production areas in Japan. However, estimations of discrimination errors for this technique have not been fully conducted; they have been limited to those for discrimination models and do not include analytical errors. Interlaboratory studies were conducted to estimate the analytical errors of the technique. Four collaborators each determined 11 elements (Na, Mg, P, Mn, Zn, Rb, Sr, Mo, Cd, Cs, and Ba) in 4 test materials of fresh and dried onions. Discrimination errors in this technique were estimated by summing (1) individual differences within lots, (2) variations between lots from the same production area, and (3) analytical errors. The discrimination errors for onions from Hokkaido, Hyogo, and Saga were estimated to be 2.3, 9.5, and 8.0%, respectively. Those for onions from abroad in determinations targeting Hokkaido, Hyogo, and Saga were estimated to be 28.2, 21.6, and 21.9%, respectively.     

Radical polymerization of vinyl monomers initiated by a mono-captodatively substituted ethane

Homopolymerization of styrene and methyl methacrylate was carried out at 60–130°C in the presence of a mono-captodatively (cd) substituted ethane bearing nitrile and ethylsulfenyl substituents on the same carbon atom. It was found that the cd-ethane accelerated both styrene and methyl methacrylate polymerizations with no induction period, but the polymerization mode of methyl methacrylate was different from that of styrene. The polymerization rate of styrene was proportional to the 0.46th power of the cd-ethane concentration. However, the cd-ethane produced a reversible radical termination in the case of methyl methacrylate. The mechanism of both polymerizations is discussed in terms of the kinetic and ESR data. © 1996 John Wiley & Sons, Inc.     

Properties of a Thin-Film Optical Waveguide Using Fluorinated Silicon Oxide and Organic Spin-on-Glass Films

A thin-film optical waveguide using a fluorinated silicon oxide (SiOF) as a core layer was investigated. An organic spin-on-glass (SOG) film was used for a cladding layer. The SiOF films were formed at 23°C by a liquid-phase deposition (LPD) technique using a supersaturated hydrofluosilicic acid (H₂SiF₆) aqueous solution. A thin-film optical waveguide structure for single mode was designed and fabricated, based on the dispersion properties of refractive indices for the LPD-SiOF and organic SOG films. The refractive indices at a wavelength of 632.8 nm were 1.430 and around 1.400 for the LPD-SiOF and organic SOG films, respectively. The thickness of LPD-SiOF films deposited was 1.18 μm. Thicknesses of cladding organic SOG films cured at 300 and 400°C were 1.28 and 1.31μm, respectively. The effective refractive indices for single mode were 1.4169 and 1.4158 at a wavelength of 632.8 nm for the cladding organic SOG films cured at 300 and 400°C, respectively, and differences between the measured and calculated incident angles were 0.84° and 1.29° for the cladding organic SOG films cured at these respective temperatures. A streak of guided-light was observed for the LPD-SiOF/SOG structure optical waveguide. The transmission loss was 7.6-7.9 dB/cm.     

Iron twin-coronet porphyrins as models of myoglobin and hemoglobin: amphibious electrostatic effects of overhanging hydroxyl groups for successful CO/O2 discrimination

Inspired by the observation of polar interactions between CO and O(2) ligands and the peptide residues at the active site of hemoglobin and myoglobin, we synthesized two kinds of superstructured porphyrins: TCP-IM, which contains a linked imidazole ligand, and TCP-PY, which contains a linked pyridine ligand, and examined the thermodynamic, kinetic, and spectroscopic (UV/Vis, IR, NMR, and resonance Raman) properties of their CO and O(2) complexes. On both sides of each porphyrin plane, bulky binaphthyl bridges form hydrophobic cavities that are suitable for the binding of small molecules. In the proximal site, an imidazole or pyridine residue is covalently fixed and coordinates axially to the central iron atom. In the distal site, two naphtholic hydroxyl groups overhang toward the center above the heme. The CO affinities of TCPs are significantly lower than those of other heme models. In contrast, TCPs have moderate O(2) binding ability. Compared with reported model hemes, the binding selectivity of O(2) over CO in TCP-IM and TCP-PY complexes is greatly improved. The high O(2) selectivity of the TCPs is mainly attributable to a low CO affinity. The comparison of k(on)(CO) values of TCPs with those of unhindered hemes indicates the absence of steric hindrance to the intrinsically linear CO coordination to Fe(II) in TCP-IM and TCP-PY. The abnormally large k(off)(CO) values are responsible for the low CO affinities. In contrast, k(off)(O(2)) of TCP-PY is smaller than those of other pyridine-coordinated model hemes. For the CO adducts of TCPs, unusually low nu(Fe-CO) and unusually high nu(C-O) frequencies are observed. These results can be ascribed to decreased back-bonding from the iron atom to the bound CO. The lone pairs of the oxygen atoms of the hydroxyl groups prevent back-bonding by exertion of a strong negative electrostatic interaction. On the other hand, high nu(Fe-O(2)) frequencies are observed for the O(2) adducts of TCPs. In the resonance Raman (RR) spectrum of oxy-TCP-IM, we observed simultaneous enhancement of the Fe-O(2) and O-O stretching modes. Furthermore, direct evidence for hydrogen bonding between the hydroxyl groups and bound dioxygen was obtained by RR and IR spectroscopy. These spectroscopic data strongly suggest that O(2) and CO binding to TCPs is controlled mainly by the two different electrostatic effects exerted by the overhanging OH groups: destabilization of CO binding by decreasing back-bonding and stabilization of O(2) binding by hydrogen bonding.     

Photoemission spectroscopic evidence of gap anisotropy in an f-electron superconductor

We used low-temperature ultrahigh-resolution (360 microeV) photoemission spectroscopy with a laser as a photon source (Laser-PES) to study the superconducting (SC) gap of an f-electron superconductor CeRu2. The unique combination of the large escape depth expected from the known universal behavior and extremely high-energy resolution has enabled us to directly measure the bulk SC gap of an f-electron superconductor for the first time. The present study provides direct evidence for an anisotropic SC gap in CeRu2, and also demonstrates the potential of Laser-PES in investigating unconventional superconductivity realized in correlated d- and f-electron superconductors.