A hybrid electrochemical–thermal method for the preparation of large ZnO nanoparticles

A simple and efficient two-step hybrid electrochemical–thermal route was developed for the synthesis of large quantity of ZnO nanoparticles using aqueous sodium bicarbonate electrolyte and sacrificial Zn anode and cathode in an undivided cell under galvanostatic mode at room temperature. The bath concentration and current density were varied from 30 to 120 mmol and 0.05 to 1.5 A/dm². The electrochemically generated precursor was calcined for an hour at different range of temperature from 140 to 600 °C. The calcined samples were characterized by XRD, SEM/EDX, TEM, TG-DTA, FT-IR, and UV–Vis spectral methods. Rietveld refinement of X-ray data indicates that the calcined compound exhibits hexagonal (Wurtzite) structure with space group of P63mc (No. 186). The crystallite sizes were in the range of 22–75 nm based on Debye–Scherrer equation. The TEM results reveal that the particle sizes were in the order of 30–40 nm. The blue shift was noticed in UV–Vis absorption spectra, the band gaps were found to be 5.40–5.11 eV. Scanning electron micrographs suggest that all the samples were randomly oriented granular morphology.     

Functionalized-graphene modified graphite electrode for the selective determination of dopamine in presence of uric acid and ascorbic acid

Graphene is chemically synthesized by solvothermal reduction of colloidal dispersions of graphite oxide. Graphite electrode is modified with functionalized-graphene for electrochemical applications. Electrochemical characterization of functionalized-graphene modified graphite electrode (FGGE) is carried out by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The behavior of FGGE towards ascorbic acid (AA), dopamine (DA) and uric acid (UA) has been investigated by CV, differential pulse voltammetry (DPV) and chronoamperommetry (CA). The FGGE showed excellent catalytic activity towards electrochemical oxidation of AA, DA and UA compared to that of the bare graphite electrode. The electrochemical oxidation signals of AA, DA and UA are well separated into three distinct peaks with peak potential separation of 193mv, 172mv and 264mV between AA-DA, DA-UA and AA-UA respectively in CV studies and the corresponding peak potential separations in DPV mode are 204mv, 141mv and 345mv. The FGGE is successfully used for the simultaneous detection of AA, DA and UA in their ternary mixture and DA in serum and pharmaceutical samples. The excellent electrocatalytic behavior of FGGE may lead to new applications in electrochemical analysis.     

Spectral characterization of apatite formation on poly(2-hydroxyethylmethacrylate)-TiO2 nanocomposite film prepared by sol-gel process

Poly(2-hydroxyethylmethacrylate) films incorporated with titanium dioxide nanoparticles were successfully synthesized by an in situ sol-gel process. The in vitro bioactive properties of the films were assessed after immersion in simulated body fluid for up to 21 days through biomimetic method. Hydroxyapatite formation was observed on the surfaces of nanocomposites. This indicates that prepared composites are bioactive. Fourier transforms infrared spectroscopy, X-ray diffraction patterns, X-ray photoelectron spectroscopy and scanning electron microscope images confirm the hydroxyapatite formation on nanocomposite. The present study provides an analytical method for the assessment of titanium dioxide nanoparticles filled poly(2-hydroxyethylmethacrylate) polymer nanocomposites for biomedical applications.     

A class of subelliptic quasilinear equations

Suppose $\mathfrak {X} = \{X_1, X_2, \ldots,\,X_m\}$ is a system of real smooth vector fields on an open neighbourhood Ω of the closure of a bounded connected open set M in $\mathbb {R}^N$ satisfying the finite rank condition of Hörmander, namely the rank of the Lie algebra generated by $\mathfrak {X}$ under the usual bracket operation is a constant equal to N. We study the smoothness of solutions of a class of quasilinear equations of the form $$Q_{\mathfrak {X}}u = \sum _{j=1}^m X_j^*a_j(x, u, Xu) +b (x, u, Xu) = 0$$ where $a_j,\,b \in C^{\infty}(\Omega \times \mathbb {R} \times \mathbb {R}^m; \mathbb {R})$ . It is shown that if the matrix $\left({\frac {\partial a_j}{\partial \xi_i}}\right)$ is positive definite on $M \times \mathbb {R}^{m+1}$ then any weak solution $u \in \mathcal {C}^{2,\alpha}(M, \mathfrak {X})$ belongs to C ^∞(M).     

Kinetics of oxidation of indigo carmine by N-sodio-N-bromotoluenesulfonamide in acidic buffer medium

The kinetics of oxidation of indigo carmine (IC) by N-sodio-N-bromotoluenesulfonamide or bromamine-T (BAT) in pH 5 buffer medium has been investigated at 30°C using spectrophotometry at 610 nm. The reaction rate shows dependencies of first-order on [IC]₀ second-order on [BAT]₀, fractional order on [H⁺], and inverse first-order on [ρ-toluenesulfonamide]. The addition of chloride and bromide ions, and the variation of ionic strength of the medium have no influence on the reaction rate. There is a negative effect of the dielectric constant of the solvent. Activation parameters have been calculated. A single-pathway mechanism for the reaction, consistent with the kinetic data, has been proposed. © John Wiley & Sons, Inc. Int J Chem Kinet 29: 453–459, 1997     

Carmine and Fast Green as Corrosion Inhibitors for Mild Steel in Hydrochloric Acid Solution

The inhibition action of carmine and fast green dyes on corrosion of mild steel in 0.5 M HCl was investigated using mass loss, polarization and electrochemical impedance (EIS) methods at 300 K. The inhibition efficiency was found to increase with increasing concentration of the inhibitors. The inhibition efficiency of fast green (%η - 98) is higher than that of carmine (%η - 92) and found to be maximum in 1 × 10^-3 M solution. The inhibitors act as mixed type with predominant cathodic effect. The inhibitors were adsorbed on the mild steel surface according to the Temkin adsorption isotherm. The surface morphology of the mild steel specimens was evaluated using SEM images.     

Direct electrochemical non-enzymatic assay of glucose using functionalized graphene

A non-enzymatic amperometric sensor is developed based on the graphite electrode modified with functionalized graphene for the determination of β, d (+)-glucose. Cyclic voltammetry and electrochemical impedance spectroscopy techniques are used to study the behavior. Atomic force microscopy was used to study the surface topography of the working electrode before and after its modification. The sensor enabled the direct electrochemical oxidation of β, d (+)-glucose in alkaline medium and responded linearly to the analyte over the range from 0.5?×?10^?3 to 7.5?×?10^?3?M with a limit of detection of 10?μM. The sensor is found to exhibit a better sensitivity of 28.4?μA?mM^?1?cm^?2, good stability, and shelf life. The sensitivity of the sensor to β, d (+)-glucose was not affected by the commonly co-existing interfering substances such as l-ascorbic acid, dopamine, uric acid, and acetaminophen.     

Study of lithium ion intercalation/de-intercalation into LiNi1/3Mn1/3Co1/3O2 in aqueous solution using electrochemical impedance spectroscopy

The mechanism of lithium ion intercalation/de-intercalation into LiNi_1/3Mn_1/3Co_1/3O₂ cathode material prepared by reactions under autogenic pressure at elevated temperatures method is investigated both in aqueous and non-aqueous electrolytes using electrochemical impedance spectroscopy (EIS) technique. In accordance with the results obtained an equivalent circuit is used to fit the impedance spectra. The kinetic parameters of intercalation/de-intercalation processes are evaluated with the help of the same equivalent circuit. The dependence of charge transfer resistance (R _ct), exchange current (I ₀), double layer capacitance (C _dl), Warburg resistance (Z _w), and chemical diffusion coefficient (D _Li+) on potential during intercalation/de-intercalation is studied. The behavior of EIS spectra and its potential dependence is studied to get the kinetics of the mechanism of intercalation/de-intercalation processes, which cannot be obtained from the usual electrochemical studies like cyclic voltammetry. The results indicate that intercalation and de-intercalation of lithium ions in aqueous solution follows almost similar mechanism in non-aqueous system. D _Li+ values are in the range of 10^?8 to 10^?14?cm²?s^?1 in aqueous 5?M LiNO₃ and that in non-aqueous 1?M LiAsF₆/EC+DMC electrolyte is in the order of 10^?12?cm²?s^?1 during the intercalation/de-intercalation processes. A typical cell LiTi₂ (PO4)₃/5?M LiNO₃/LiNi_1/3Mn_1/3Co_1/3O₂ is constructed and the cycling stability is compared to that with an organic electrolyte.     

Graphene-carbon nanotubes modified graphite electrode for the determination of nicotinamide adenine dinucleotide and fabrication of alcohol biosensor

Through layer-by-layer adsorption (LBL) technique, the positively charged multiwalled carbon nanotubes (MWCNTs) and negatively charged graphene multilayer film were formed on graphite-poly(diallyldimethylammoniumchloride)-polystyrenesulphonate (Gr/PDDA/PSS) modified electrode. Due to large surface area and remarkable electrocatalytic properties of MWCNTs and graphene, the Gr/(PDDA/PSS-[MWCNTs-NH ₃ ⁺ -graphene-COO^?]₅) electrode exhibits potent electrocatalytic activity towards the electro-oxidation of nicotinamide adenine dinucleotide (NADH). A substantial decrease in the overpotential was observed at modified electrode, and the electrode showed high sensitivity to the electrocatalytic oxidation of NADH. The modified electrode was characterized by cyclic voltammetry and electrochemical impedance spectroscopy. The diffusion coefficient was calculated by chronocoulometry. Chronoamperometric studies showed the linear relationship between oxidation peak current and the concentration of NADH in the range 25–250?μM (R?=?0.999) with the detection limit of 0.1?μM (S/N?=?3). Further, dopamine, uric acid, acetaminophen and hydrogen peroxide do not interfere in the detection of NADH. The ability of MWCNTs and graphene to promote the electron transfer between NADH and the electrode exhibits a promising biocompatible platform for development of dehydrogenase-based amperometric biosensors. Alcohol dehydrogenase (ADH) was casted on Gr/(PDDA/PSS-[MWCNTs-NH ₃ ⁺ -graphene-COO^?]₅) electrode; the resulting biosensor showed rapid and high sensitive amperometric response to ethanol with the detection limit of 10?μM (S/N?=?3).