A precision measurement of the hyperfine structure of87Sr+

The ground state hyperfine splitting of⁸⁷Sr⁺ was measured with a precision of 1×10^–8. The experiments were performed with an RF ion trap connected to an ISOL (isotope separator on-line), where all the possible transitions between Zeeman sublevels were observed by a laser-microwave double resonance method. The magnetic dipole hyperfine constant was determined to beA=–1 000 473.673 (11) kHz.     

New alcohol resistant strains ofSaccharomyces cerevisiae species for potable alcohol production using molasse

Two alcohol resistant strains of Saccharomyces cerevisiae species were isolated from a Greek vineyard plantation. The strain AXAZ-1 gave a concentration of 17.6% v/v alcohol and AXAZ-2 16.5%, when musts from raisin and sultana grapes, respectively, were employed in alcoholic fermentations. They were found to be more alcohol tolerant and fermentative in the fermentation of molasse than the traditional baker's yeast. Specifically, using an initial [symbol: see text] Be density of 16 [symbol: see text] Be at the repeated batch fermentation process, in the first as well as fourth batch, the better AXAZ-1 gave final [symbol: see text] Be densities of 6.0 and 10.5 respectively, and the baker's yeast 11.6 and 14.5.     

Novel method to control release of lipophilic drugs with high potency from silicone

Silicone has been utilized as a carrier material for sustained release system of lipophilic drugs. Extensive studies revealed that drug release rate is influenced by factors such as physicochemical properties of the drug and additives.(1-5)) When a lipophilic drug is highly potent at low concentrations, the drug release rate should be strictly controlled so as to avoid side effects. In this study, using vitamin D(3) (VD(3)) as an example of such drugs, we investigated novel method to suppress initial burst and to modify drug release rate from silicone matrix. As a result, it was found that (a). addition of human serum albumin (HSA) suppressed initial burst and enhanced release rate in the later stage, resulting constant release of VD(3), (b). covering a matrix formulation with a membrane of low diffusivity (core-rod formulation) suppressed initial burst and released drug in a constant rate, and (3) using materials for which the drug has high affinity as dissolution solvent (reservoir formulation), the drug release rate was reduced.     

Efficient routes to optically active azido-, amino-, di-azido- and di-amino-cyclitols with chiro- and allo-configuration from myo-inositol

Efficient routes to hitherto unknown 1d-2,5-di-azido-di-deoxy-allo-inositol, 1d-2,5-di-amino-di-deoxy-allo-inositol, 1l-1-azido-1-deoxy-chiro-inositol and 1l-1-amino-1-deoxy-chiro-inositol were developed by using cheaply available myo-inositol as the starting material. Preliminary investigations on the enzyme inhibitory properties were done. The methodology reported is amenable to gram scale synthesis and thus can find application in natural product synthesis.     

Application of an automated synthesis suite to parallel solution-phase peptide synthesis

An in-house developed automated synthesis suite was used to prepare a library of 72 tetrapeptide derivatives, the starting materials for pharmaceutically attractive pentapeptides, employing a convergent strategy. An initial set of 18 dipeptides were synthesized on a large-scale (100-1000 g) using automated synthesis workstations, and then 72 tetrapeptides were synthesized on a medium scale (5-10 g) using an automated system. Each di- or tetrapeptide was prepared in a single operating cycle using a modified methanesulfonic acid method, then a sub-library of 56 pentapeptides were synthesized in parallel, on a small-scale (100 mg-1 g) using a robotic workstation.     

Nuclearg-factors of the 1229 and 2911 keV isomers in143Nd

Nuclearg-factors of the 1229 keV 13⁺/2 and 2911 keV 21⁺/2 level and the half-life of the 1229 keV level have been measured to beg(1229)=0.058(5),g(2911)=0.69(12) andT _1/2 (1229)=6.79(2) ns. The experimental g-factors show that the 1229 keV level has a dominant configuration of (f _7/23^–), and the 2911 keV level has an almost pure (f _7/27^–), configuration.The authors would like to thank the crew of CYRIC for the operation of the cyclotron.     

Determination of the change of nuclear charge radius of the119Sn Mössbauer transition by internal conversion

Radioactive¹¹⁹Sb was implanted into six host matrices (CaSnO₃, Pt, Y, Au,-Sn, Pb) and internal conversion electrons of the 23.87 keV transition in¹¹⁹Sn were measured with an iron-free magnetic spectrometer as well as Mössbauer spectra. In the analysis of the conversion spectra of outermost electrons, the overlapping K-LM Auger lines were subtracted using the Auger spectrum of tin measured with another source of^117mSn, and the shake-off effect accompanying the conversion process was considered. From the correlation between the Mössbauer isomer shifts and the intensity ratios of O-shell to N₁-shell conversion electrons, the change of the nuclear charge radius of the 23.87 keV transition of¹¹⁹Sn was deduced to be R/R=(0.87 ± 0.25) × 10^–4 for a uniform charge distribution ofR= 1.2 ×A ^1/3 fm or, equivalently, r²>—=(3.6 ± 1.0) ×10^–3 fm².     

Polymers with advanced structural and supramolecular features synthesized through topochemical polymerization

Polymers are an integral part of our daily life. Hence, there are constant efforts towards synthesizing novel polymers with unique properties. As the composition and packing of polymer chains influence polymer''s properties, sophisticated control over the molecular and supramolecular structure of the polymer helps tailor its properties as desired. However, such precise control via conventional solution-state synthesis is challenging. Topochemical polymerization (TP), a solvent- and catalyst-free reaction that occurs under the confinement of a crystal lattice, offers profound control over the molecular structure and supramolecular architecture of a polymer and usually results in ordered polymers. In particular, single-crystal-to-single-crystal (SCSC) TP is advantageous as we can correlate the structure and packing of polymer chains with their properties. By designing molecules appended with suitable reactive moieties and utilizing the principles of supramolecular chemistry to align them in a reactive orientation, the synthesis of higher-dimensional polymers and divergent topologies has been achieved via TP. Though there are a few reviews on TP in the literature, an exclusive review showcasing the topochemical synthesis of polymers with advanced structural features is not available. In this perspective, we present selected examples of the topochemical synthesis of organic polymers with sophisticated structures like ladders, tubular polymers, alternating copolymers, polymer blends, and other interesting topologies. We also detail some strategies adopted for obtaining distinct polymers from the same monomer. Finally, we highlight the main challenges and prospects for developing advanced polymers via TP and inspire future directions in this area.

This perspective showcases the potential of topochemical polymerization as an effective tool for synthesizing polymers with advanced molecular and supramolecular structures.     

Synthesis of (±)-ascochlorin,an antiviral antibiotic

(±)-Ascochlorin, 5-chloro-2, 4-dihydroxy-6-methyl-3-[(2$\text{E}$, 4$\text{E}$)-5-(1,2,6-trimethyl-3-oxocyclohexyl)3-methyl-3,4-pentadienyl] benzaldehyde, was synthesized in 14 steps from (±)-3,4-dimethyl-2-cyclohexenone.     

Palladium-catalyzed regio- and diastereo-selective allylic alkylation using 2-(diphenylphosphino)benzoic acid: construction of vicinal quaternary and tertiary carbon centers

The palladium-catalyzed regio- and diastereo-selective allylic alkylation of allyl acetates with carbon nucleophiles occurred. The stereochemistry was highly controlled by the palladium catalyst with 2-(diphenylphosphino)benzoic acid as the ligand, and vicinal quaternary and tertiary carbon centers were constructed.