Nonlinear multiple objective optimization: An algorithm and some theory

This paper presents an algorithm and the supporting theory for solving a class of nonlinear multiple criteria optimization problems using Zionts—Wallenius type of interaction. The Zionts—Wallenius method, as extended in this paper, can be used for solving multiple criteria problems with concave objective and (implicit) value functions and convex feasible regions. Modifications of the method to handle nonconvex feasible regions and general nonlinear objective functions are also discussed.This research was supported, in part, by a Faculty Research Development Award and by a Council of 100 Research Grant from Arizona State University (Roy), and by a grant from Y. Jahnsson Foundation, Finland (Wallenius). The research was performed while the second author was a Visiting Professor at Arizona State University.     

Quantification of antimony depth profiles in Sb-doped tin dioxide thin films

Sb-doped SnO(2) thin films, deposited by atomic layer epitaxy (ALE) for gas sensor applications, have been characterized by secondary ion mass spectrometry (SIMS). Quantification of the depth profile data has been carried out by preparing a series of ion implanted standards. Average concentrations determined by SIMS have been compared with Sb/Sn ratios obtained by X-ray fluorescence (XRF) spectrometry and proton induced X-ray emission (PIXE) spectrometry and have been found to be in good agreement. However, a detection limit of 5x10(18) at cm(-3) could only be obtained because of mass interferences. SIMS data show that the ALE technique can be used to produce a controllable growth and doping of thin films.     

Iron(II)‐ and Cobalt(II) Complexes with Tridentate Bis(imino)pyridine Nitrogen Ligands Bearing Chiral Bulky Aliphatic and Aromatic Substituents: Crystal Structure of [CoCl2{2, 6‐bis[R‐(+)‐(bornylimino)methyl]pyridine}]

Iron(II) and cobalt(II) complexes ( 7 ‐ 15 ) based on new aldimine 2, 6‐bis[(imino)methyl]pyridine ( 1 , 2 , 4 , 6 ) and ketimine (2, 6‐bis[(imino)ethyl]pyridine ( 3 , 5 ) ligands with bulky chiral aliphatic or aromatic terminal groups have been prepared and characterized by ¹H NMR, ¹³C NMR, IR‐, mass spectroscopy (EI), and elemental analysis. The complex [CoCl₂(BBoMP)]·¹/₂ CHCl₃ ( 13 ) (BBoMP: 2, 6‐bis{(R‐(+)‐(bornylimino)‐methyl}pyridine) crystallizes in monoclinic space group P2₁ with cell dimensions: a = 7.6603(11) Å, b = 28.3153(14) Å, c = 13.537(2) Å, V = 2908.1(6) ų, Z = 4. The coordination sphere around Co is distorted trigonal bipyramidal.     

Can a linear value function explain choices? An experimental study

We investigate in a simple bi-criteria experimental study, whether subjects are consistent with a linear value function while making binary choices. Many inconsistencies appeared in our experiment. However, the impact of inconsistencies on the linearity vs. non-linearity of the value function was minor. Moreover, a linear value function seems to predict choices for bi-criteria problems quite well. This ability to predict is independent of whether the value function is diagnosed linear or not. Inconsistencies in responses did not necessarily change the original diagnosis of the form of the value function. Our findings have implications for the design and development of decision support tools for Multiple Criteria Decision Making problems.     

Wettability conversion on the liquid flame spray generated superhydrophobic TiO2 nanoparticle coating on paper and board by photocatalytic decomposition of spontaneously accumulated carbonaceous overlayer

Titanium dioxide (TiO₂) is a photoactive material with various interesting and useful properties. One of those is the perfect wettability of TiO₂ surface after ultraviolet (UV) illumination. Wettability of a solid surface plays an important role in the field of printing, coating, and adhesion among others. Here we report on a superhydrophobic and photoactive liquid flame spray (LFS) generated TiO₂ nanoparticle coating that can be applied on web-like materials such as paper and board in one-step roll-to-roll process. The LFS TiO₂ nanoparticle coated paper and board were superhydrophobic instantly after the coating procedure because of spontaneously accumulated carbonaceous overlayer on TiO₂, and thus there was no need for any type of separate hydrophobization treatment. The highly photoactive LFS TiO₂ nanoparticle coating could be converted steplessly from superhydrophobic to superhydrophilic by UV-illumination, and the coating gave strong response to natural daylight illumination even in the shade. The superhydrophobic LFS TiO₂ coated surface can be used as an intelligent substrate, where photo-generated hydrophilic patterns guide the fluid setting and figure formation. Our study reveals that the wettability changes on the LFS TiO₂ surface were primarily caused by the photocatalytic removal of the carbonaceous material from TiO₂ during the UV-illumination and spontaneous accumulation of the carbonaceous material on the surface of the metal oxide during storage in the dark. The latter mechanism was found to be a temperature activated process which could be significantly speeded up by heat treatment. If other mechanisms such as surface oxidization, increment of hydroxyl groups, or charge separation played a role in the wetting phenomena on TiO₂, their effect was rather secondary as the removal and accumulation of the carbonaceous material dominated the wettability changes on the surface. Our study gives valuable information on the complex issue of photo-induced wettability changes on TiO₂.     

A paper-based lateral flow assay for morphine

Morphine was used as a model analyte to examine the possibility of using cellulose, physically modified by papermaking and converting techniques, as a capillary matrix in a lateral flow type of diagnostic assay. This research was directed toward low-cost, disposable, and portable paper-based diagnostics, with the aim of addressing the analytical performance of paper as a substrate in the analysis for drugs of abuse. Antibody Fab fragments were used as sensing molecules, and gold nanoparticle detection was employed. Inkjet printing was used to pattern sensing biomolecules as detection zones on paper. To validate the usefulness of paper as a diagnostic platform, the principle of a direct sandwich assay, based on immunocomplex formation between morphine and the anti-morphine Fab fragment and detection of the formed immunocomplex by another Fab fragment, was implemented. Results were compared with that achieved by using nitrocellulose as a reference material. Possible interfering from the sample matrix on assay quality was investigated with spiked oral fluid samples. Under optimized conditions, a visually assessed limit of detection for the sandwich assay was 1 ng/mL, indicating that the paper-based test devices developed in this work can perform screening for drugs of abuse and can fulfill the requirement for a sensitive assay in diagnostically relevant ranges. Fig

?     

Switchable water absorption of paper via liquid flame spray nanoparticle coating

Surface wetting/anti-wetting and liquid absorption are relevant properties of many porous solids including paper and other cellulose-based materials. Here we demonstrate how surface wetting by water and water absorption of commercially available kraft paper can be altered by thin nanoparticle coatings fabricated by liquid flame spray in facile and continuous one-step process. Surface wettability and absorption properties of paper increased with silica and decreased with titania (TiO₂) nanoparticle coatings. Moreover, the water-repellent (superhydrophobic) TiO₂ nanoparticle coated paper could be switched to superhydrophilic and water absorbing by ultraviolet illumination. The experiments revealed that although surface wetting and liquid absorption of nanoparticle coated paper are strongly related to each other, they are two distinct phenomena which do not necessarily correlate. We propose wetting regimes on the nanoparticle coated paper samples on the basis of the experimental observations.     

A Decision Model for the Multiple Criteria Group Secretary Problem: Theoretical Considerations

A decision model is developed for solving the discrete multiple criteria group secretary problem. The model extends the single decision-maker progressive algorithm by Korhonen, Moskowitz and Wallenius to group contexts. As the original progressive algorithm, it relaxes the usual assumption of a fixed set of available decision alternatives and complete knowledge of a decision-maker's preference structure (value function). The decision-makers are requested to settle on a compromise, if possible. The model then proceeds with determining the likelihood of finding possibly/surely better settlements (compromises). Linear value functions, linear prospect theory-type value functions, and quasiconcave value functions are considered.