Tetra(μ3-hydroxo)hexa(μ2-carboxylato-O,O′)-bridged tetranuclear terbium(III) cubane complex

A novel tetranuclear terbium(III) complex [Tb₄(OH)₄(pybet)₆(H₂O)₈][Tb₄(OH)₄(pybet)₆(H₂O)₇ (NO₃)](ClO₄)₁₄·6H₂O has been synthesized and shown by X-ray crystallography to have a cubane-like Tb₄(μ₃-OH)₄(μ₂-carboxylato-O,O′)₆ core. The ligand pybet is pyridinoacetate, C₅H₅⁺N-CH₂CO₂⁻. Magnetic susceptibility data were measured for this Tb₄ complex in the range of 2.0–320 K and in fields of 1.0 G to 50.0 kG. It is concluded that either there is very weak antiferromagnetic exchange interaction (J = −0.015 cm⁻¹) or there is a small crystal-field splitting of the ⁷F₆ Tb^III ground state.     

Continuous pH monitoring during pretreatment of yellow poplar wood sawdust by pressure cooking in water

Yellow poplar wood sawdust consists of 41% cellulose and 19% hemicellulose. The goal of pressure cooking this material in water is to hydrate the more chemically resistive regions of cellulose in order to enhance enzymatic conversion to glucose. Pretreatment can generate organic acids through acid-catalyzed degradation of monosaccharides formed because of acids released from the biomass material or the inherent acidity of the water at temperatures above 160°C. The resulting acids will further promote the acid-catalyzed degradation of monomers that cause both a reduction in the yield and the formation of fermentation inhibitors such as hydroxymethyl furfural and furfural. A continuous pH-monitoring system was developed to help characterize the trends in pH during pretreatment and to assist in the development of a base (2.0 M KOH) addition profile to help keep the pH within a specified range in order to reduce any catalytic degradation and the formation of any monosac-charide degradation products during pretreatment. The results of this work are discussed.     

Synthesis and Characterization of a [Mn12O12(O2CR)16(H2O)4] Complex Bearing Paramagnetic Carboxylate Ligands. Use of a Modified Acid Replacement Synthetic Approach

Summary.  A new modified approach for the synthesis of Mn₁₂ clusters, based on the use of complex [Mn₁₂O₁₂(O₂C ^t Bu)₁₆(H₂O)₄] (2) as starting material to promote the acidic ligand replacement, is presented here. This new synthetic approach allowed us to obtain complex [Mn₁₂O₁₂(O₂CC₆H₄N(O^•) ^t Bu)₁₆(H₂O)₄] (3), whose preparation remained elusive by direct replacement of the acetate groups of Mn₁₂Ac (1). Complex 3 bearing open-shell radical units, was prepared to increase the total spin number of its ground state, and consequently, to increase T _B , with the expectation that the radical ligands may couple ferromagnetically with the Mn₁₂ core. Unfortunately, magnetic measurements of complex 3 revealed that the sixteen radical carboxylate ligands interact antiferromagnetically with the Mn₁₂ core to yield a S = 2 magnetic ground state. Corresponding author. E-mail: vecianaj@icmab.es Received March 27, 2002; accepted May 2, 2002     

Tetranuclear and Octanuclear Manganese Carboxylate Clusters: Preparation and Reactivity of (NBu(n)(4))[Mn(4)O(2)(O(2)CPh)(9)(H(2)O)] and Synthesis of (NBu(n)(4))(2)[Mn(8)O(4)(O(2)CPh)(12)(Et(2)mal)(2)(H(2)O)(2)] with a "Linked-Butterfly" Structure

The reaction of Mn(O(2)CPh)(2).2H(2)O and PhCO(2)H in EtOH/MeCN with NBu(n)(4)MnO(4) gives (NBu(n)(4))[Mn(4)O(2)(O(2)CPh)(9)(H(2)O)] (4) in high yield (85-95%). Complex 4 crystallizes in monoclinic space group P2(1)/c with the following unit cell parameters at -129 degrees C: a = 17.394(3) ?, b = 19.040(3) ?, c = 25.660(5) ?, beta = 103.51(1) degrees, V = 8262.7 ?(3), Z = 4; the structure was refined on F to R (R(w)) = 9.11% (9.26%) using 4590 unique reflections with F > 2.33sigma(F). The anion of 4 consists of a [Mn(4)(&mgr;(3)-O)(2)](8+) core with a "butterfly" disposition of four Mn(III) atoms. In addition to seven bridging PhCO(2)(-) groups, there is a chelating PhCO(2)(-) group at one "wingtip" Mn atom and terminal PhCO(2)(-) and H(2)O groups at the other. Complex 4 is an excellent steppingstone to other [Mn(4)O(2)]-containing species. Treatment of 4 with 2,2-diethylmalonate (2 equiv) leads to isolation of (NBu(n)(4))(2)[Mn(8)O(4)(O(2)CPh)(12)(Et(2)mal)(2)(H(2)O)(2)] (5) in 45% yield after recrystallization. Complex 5 is mixed-valent (2Mn(II),6Mn(III)) and contains an [Mn(8)O(4)](14+) core that consists of two [Mn(4)O(2)](7+) (Mn(II),3Mn(III)) butterfly units linked together by one of the &mgr;(3)-O(2)(-) ions in each unit bridging to one of the body Mn atoms in the other unit, and thus converting to &mgr;(4)-O(2)(-) modes. The Mn(II) ions are in wingtip positions. The Et(2)mal(2)(-) groups each bridge two wingtip Mn atoms from different butterfly units, providing additional linkage between the halves of the molecule. Complex 5.4CH(2)Cl(2) crystallizes in monoclinic space group P2(1)/c with the following unit cell parameters at -165 degrees C: a = 16.247(5) ?, b = 27.190(8) ?, c = 17.715(5) ?, beta = 113.95(1) degrees, V = 7152.0 ?(3), Z = 4; the structure was refined on F to R (R(w)) = 8.36 (8.61%) using 4133 unique reflections with F > 3sigma(F). The reaction of 4 with 2 equiv of bpy or picolinic acid (picH) yields the known complex Mn(4)O(2)(O(2)CPh)(7)(bpy)(2) (2), containing Mn(II),3Mn(III), or (NBu(n)(4))[Mn(4)O(2)(O(2)CPh)(7)(pic)(2)] (6), containing 4Mn(III). Treatment of 4 with dibenzoylmethane (dbmH, 2 equiv) gives the mono-chelate product (NBu(n)(4))[Mn(4)O(2)(O(2)CPh)(8)(dbm)] (7); ligation of a second chelate group requires treatment of 7 with Na(dbm), which yields (NBu(n)(4))[Mn(4)O(2)(O(2)CPh)(7)(dbm)(2)] (8). Complexes 7 and 8 both contain a [Mn(4)O(2)](8+) (4Mn(III)) butterfly unit. Complex 7 contains chelating dbm(-) and chelating PhCO(2)(-) at the two wingtip positions, whereas 8 contains two chelating dbm(-) groups at these positions, as in 2 and 6. Complex 7.2CH(2)Cl(2) crystallizes in monoclinic space group P2(1) with the following unit cell parameters at -170 degrees C: a = 18.169(3) ?, b = 19.678(4) ?, c = 25.036(4) ?, beta = 101.49(1) degrees, V = 8771.7 ?(3), Z = 4; the structure was refined on F to R (R(w)) = 7.36% (7.59%) using 10 782 unique reflections with F > 3sigma(F). Variable-temperature magnetic susceptibility studies have been carried out on powdered samples of complexes 2 and 5 in a 10.0 kG field in the 5.0-320.0 K range. The effective magnetic moment (&mgr;(eff)) for 2 gradually decreases from 8.61 &mgr;(B) per molecule at 320.0 K to 5.71 &mgr;(B) at 13.0 K and then increases slightly to 5.91 &mgr;(B) at 5.0 K. For 5, &mgr;(eff) gradually decreases from 10.54 &mgr;(B) per molecule at 320.0 K to 8.42 &mgr;(B) at 40.0 K, followed by a more rapid decrease to 6.02 &mgr;(B) at 5.0 K. On the basis of the crystal structure of 5 showing the single Mn(II) ion in each [Mn(4)O(2)](7+) subcore to be at a wingtip position, the Mn(II) ion in 2 was concluded to be at a wingtip position also. Employing the reasonable approximation that J(w)(b)(Mn(II)/Mn(III)) = J(w)(b)(Mn(III)/M(III)), where J(w)(b) is the magnetic exchange interaction between wingtip (w) and body (b) Mn ions of the indicated oxidation state, a theoretical chi(M) vs T expression was derived and used to fit the experimental molar magnetic susceptibility (chi(M)) vs T data. The obtained fitting parameters were J(w)(b) = -3.9 cm(-)(1), J(b)(b) = -9.2 cm(-)(1), and g = 1.80. These values suggest a S(T) = (5)/(2) ground state spin for 2, which was confirmed by magnetization vs field measurements in the 0.5-50.0 kG magnetic field range and 2.0-30.0 K temperature range. For complex 5, since the two bonds connecting the two [Mn(4)O(2)](7+) units are Jahn-Teller elongated and weak, it was assumed that complex 5 could be treated, to a first approximation, as consisting of weakly-interacting halves; the magnetic susceptibility data for 5 at temperatures >/=40 K were therefore fit to the same theoretical expression as used for 2, and the fitting parameters were J(w)(b) = -14.0 cm(-)(1) and J(b)(b) = -30.5 cm(-)(1), with g = 1.93 (held constant). These values suggest an S(T) = (5)/(2) ground state spin for each [Mn(4)O(2)](7+) unit of 5, as found for 2. The interactions between the subunits are difficult to incorporate into this model, and the true ground state spin value of the entire Mn(8) anion was therefore determined by magnetization vs field studies, which showed the ground state of 5 to be S(T) = 3. The results of the studies on 2 and 5 are considered with respect to spin frustration effects within the [Mn(4)O(2)](7+) units. Complexes 2 and 5 are EPR-active and -silent, respectively, consistent with their S(T) = (5)/(2) and S(T) = 3 ground states, respectively.     

Solid state thermochemical decomposition of neat 1,3,5,5-tetranitrohexahydropyrimidine (DNNC) and its DNNC-d6 perdeuterio-labeled analogue

The solid state thermochemical decomposition kinetics and activation energy of neat 1,3,5,5-tetranitrohexahydropyrimidine (DNNC) and its DNNC-d₆ deuterium labeled analogue were obtained by isothermal differential scanning calorimetry (IDSC) at 142, 145, and 148 °C. Global rate constants and kinetic deuterium isotope effect (KDIE) data from the exothermic decomposition process suggest that homolytic CH bond rupture, in one or both types of chemically non-equivalent methylene (CH₂) groups of the DNNC ring structure, constitutes the exothermic rate-controlling step. A DNNC-d₆ energy of activation equal to 115 kJ/mol was determined for this initial autocatalytic exothermic energy release from which a 106 kJ/mol activation energy was calculated for unlabeled DNNC. This exothermic autocatalytic decomposition process follows an extended endothermic induction period for DNNC which shows a higher 128 kJ/mol activation energy during which a catalytic initiating species may form by a rate-controlling step different from CH bond rupture.     

Single-molecule magnets: novel Mn(8) and Mn(9) carboxylate clusters containing an unusual pentadentate ligand derived from pyridine-2,6-dimethanol

The reactions of the Mn(III)(3) and Mn(II)Mn(III)(2) complexes [Mn(3)O(O(2)CEt)(6)(py)(3)][ClO(4)] and [Mn(3)O(O(2)CEt)(6)(py)(3)] with pyridine-2,6-dimethanol (pdmH(2)) afford the mixed-valence Mn(II)(6)Mn(III)(2) octanuclear complex [Mn(8)O(2)(py)(4)(O(2)CEt)(8)(L)(2)][ClO(4)](2) (1) and the Mn(II)(7)Mn(III)(2) enneanuclear complex [Mn(9)(O(2)CEt)(12)(pdm)(pdmH)(2)(L)(2)] (2), respectively. Both compounds contain a novel pentadentate ligand, the dianion of (6-hydroxymethylpyridin-2-yl)-(6-hydroxymethylpyridin-2-ylmethoxy)methanol (LH(2)), which is the hemiacetal formed in situ from the Mn-assisted oxidation of pdmH(2). Complex 1 crystallizes in the monoclinic space group P2(1)/n with the following cell parameters at -160 degrees C: a = 16.6942(5) A, b = 13.8473(4) A, c = 20.0766(6) A, beta = 99.880(1) degrees, V = 4572.27 A(3), and Z = 2, R (R(w)) = 4.78 (5.25). Complex 2.0.2MeCN crystallizes in the triclinic space group Ponemacr; with the following cell parameters at -157 degrees C: a = 12.1312(4) A, b = 18.8481(6) A, c = 23.2600(7) A, alpha = 78.6887(8) degrees, beta = 77.9596(8) degrees, gamma = 82.3176(8) degrees, V = 5076.45 A(3), and Z = 2, R (R(w)) = 4.12 (4.03). Both complexes are new structural types comprising distorted-cubane units linked together, albeit in two very different ways. In addition, complex 2 features three distinct binding modes for the chelating ligands derived from deprotonated pdmH(2). Complexes 1 and 2 were characterized by variable-temperature ac and dc magnetic susceptibility measurements and found to possess spin ground states of 0 and 11/2, respectively. Least-squares fitting of the reduced magnetization data gave S = 11/2, g = 2.0, and D = -0.11 cm(-1) for complex 2, where D is the axial zero-field splitting parameter. Direct current magnetization versus field studies on 2 at <1 K show hysteresis behavior at <0.3 K, establishing 2 as a new single-molecule magnet. Magnetization decay measurements gave an effective barrier to magnetization relaxation of U(eff) = 3.1 cm(-1) = 4.5 K.     

Investigation of fill factor losses on 20.2% efficient n‐type mono‐like silicon solar cells with laser contact opening

Large area (243.36 cm²) back‐junction passivated emitter, rear totally diffused (PERT) solar cells with laser contact opening (LCO) on n‐type mono‐like crystalline Si with efficiencies of 20.2% are presented. Boron emitters with high electrical quality (implied open circuit voltage iV_OC up to 700 mV) are formed during a co‐diffusion step using SiO_x:B layers. Increasing the rear metal contact coverage, we observed a decrease in fill factor (FF) instead of the expected increase due to the decrease of the back side series resistance. We show that it can be attributed to recombination centers (RCs) in the space charge region underneath the contact spots inducing an increasing second diode contribution. The presented empirical model for the RCs implemented in Synopsys Sentaurus TCAD allows for a successful reproduction of the FF, pseudo FF and V_OC behaviour with contact coverage. According to this model, the RCs induced by laser ablation and subsequently evaporation of Al have a shallow exponential distribution with a characteristic length of L_T = 0.2 µm and an effective surface density of N *_T0 = 25 cm^–1. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Spatial and temporal resolution effects on dynamic contrast-enhanced magnetic resonance mammography

We tested the hypothesis that partial volume effects due to poor in-plane resolution and/or low temporal resolution used in clinical dynamic contrast-enhanced magnetic resonance imaging results in erroneous diagnostic information based on inaccurate estimates of tumor contrast agent extravasation and tested whether reduced encoding techniques can correct for dynamic data volume averaging. Image spatial resolution was reduced from 469 x 469 microm2 to those reported below by selecting a subset of k-space data. We then compared the top five K(trans)/V(T) "hot spots" obtained from the original data set, 469 x 469-microm in-plane spatial resolution and an 18-s temporal resolution processed by fast Fourier transform (FFT), with values obtained from data sets having in-plane spatial resolutions of 938 x 938, 1875 x 1875 and 2500 x 2500 microm2 and a temporal resolution of 18 s, or data sets with temporal resolutions of 36, 54 and 72 and a spatial resolution of 469 x 469 microm2, and found them to statistically differ from the parent data sets. We then tested four different post processing methods for improving the spatial resolution without sacrificing temporal resolution: zero-filled FFT, keyhole, reduced-encoding imaging by generalized-series reconstruction (RIGR) and two-reference RIGR (TRIGR). The top five values of K(trans)/V(T) obtained from data sets, the in-plane spatial resolutions of which were improved to 469 x 469 microm2 by zero-filling FFT, Keyhole and RIGR, statistically differed from those obtained from the original 469 x 469 microm2 FFT parent image data set. Only the 938 x 938 and 1875 x 1875 microm2 data sets reconstructed to 469 x 469 microm2 with TRIGR reconstruction method yielded values of the top five K(trans)/V(T) hot spots statistically the same as the original parent data set, 469 x 469 microm2 in-plane spatial and 18-s temporal-resolution FFT. That is, partial volume effects from data sets of different in-plane spatial resolution resulted in statistically different values of the top five K(trans)/V(T) hot spots relative to a high spatial and temporal resolution data set, and TRIGR reconstruction of these low resolution data sets to high resolution images provided statistically similar values with a savings in temporal resolution of 2 to 4 times.