Effect of explicit cationic size and valence constraints on the phase stability of 1:2 B-site-ordered perovskite ruthenates

The related parameters of cation size and valence that control the crystallization of Sr(3)CaRu(2)O(9) into a 1:2 B-site-ordered perovskite structure were explored by cationic substitution at the strontium and calcium sites and by the application of high pressure. At ambient pressures, Sr(3)MRu(2)O(9) stoichiometries yield multiphasic mixtures for M = Ni(2+), Mg(2+), and Y(3+), whereas pseudocubic perovskites result for M = Cu(2+) and Zn(2+). For A-site substitutions, an ordered perovskite structure results for Sr(3-x)Ca(x)CaRu(2)O(9), with 0 相似文献   

Spherical Particles of Zirconia-Titania of Hexagonal Structure from a Neutral Amine Route

Through the sol–gel process, using the so-called neutral amine route, spherical particles of 1:1 zirconia–titania were synthesized from zirconium(IV) and titanium(IV) butoxides as well as 1,12-diaminododecane as precursor species. The obtained product exhibited a hexagonal structure, as determinated by X-ray diffraction data. The obtained material was also characterized by thermogravimetry, differential scanning calorimetry, infrared spectroscopy, scanning electron microscopy, and surface area measurements. Despite the release of template molecules on heating, the spherical morphology was retained up to about 1200°C, at which the disruption of the spheres took place.     

Thermal properties of fluoride glasses and their gel precursors

Xerogels were prepared from zirconium, barium, aluminum, lanthanum and lithium acetates, corresponding to a Li containing ZBLA composition. The study of their thermal properties (DSC, TG/DTG, FT-IR) showed that they might be used as chemically stable precursors in the preparation of fluoride glasses. Hydrofluoric acid in solution was chosen as a mild fluorinating agent. This newly proposed technique of fluorinating allowed to obtain high quality ZBLALi glass which presents the advantage of higher thermal stability and homogeneity in comparison with the glass obtained using individual commercial fluorides.This revised version was published online in November 2005 with corrections to the Cover Date.     

Effects of Adsorbed Polyaniline on Redox Process on MoO3 Surface

The effects exhibited by adsorbed conducting polyaniline on the redox process on a molybdenum oxide surface were studied. Thermogravimetric results indicate a 4% polyaniline deposition. Cyclic voltammograms of the adsorbed polymer on MoO3 show that polyaniline exerts remarkable effects on the molybdenum blue oxidation-reduction process, with oxidation and reduction potentials of 0.33 and 0.18 V, respectively. This effect strongly enhances the electrode response, and can be used as an important tool in qualitative and/or quantitative determinations of molybdenum in solution as well as in any substrate. Copyright 1999 Academic Press.     

Site and oxidation-state specificity yielding dimensional control in perovskite ruthenates

Sr(3)CaRu(2)O(9), a new 2:1 B-site ordered perovskite ruthenate, was synthesized and its structure determined based on powder X-ray, neutron and electron diffraction data. It is composed of one layer of CaO(6) alternating with two layers of RuO(6) perpendicular to the [111] axis of the cubic perovskite structure. The ordering leads to a [-Ru-Ru-Ca-] repeat unit along each of the pseudocubic directions. Sr(3)CaRu(2)O(9) is the first example of this structure-type to include a majority metal with d electrons (Ru(V), d(3)). Three-dimensional Sr(3)CaRu(2)O(9) can be transformed to the layered Ruddlesden-Popper phase Sr(1.5)Ca(0.5)RuO(4) (i.e., Sr(3)CaRu(2)O(8)) by reduction at 1200 degrees C in flowing argon. The original structure can be restored by oxidation of Sr(1.5)Ca(0.5)RuO(4) at 1000 degrees C in flowing oxygen. This remarkable transformation highlights the structural versatility afforded by the combination of ruthenium and calcium.     

Structure‐oriented UHPLC‐LTQ Orbitrap‐based approach as a dereplication strategy for the identification of isoflavonoids from Amphimas pterocarpoides crude extract

Hyphenated techniques and especially ultra‐high performance liquid chromatography‐mass spectrometry (UHPLC‐MS) are nowadays widely employed in natural products research. However, the complex nature of plant extracts complicates considerably the analysis and the identification of their constituents. Nevertheless, new MS analyzers with increased resolving power and accuracy such as the orbital trap (Orbitrap) could facilitate drastically this process. The objective of this study is the development of a new structure‐oriented approach based on fast UHPLC‐high‐resolution (HR)MS and HRMS/MS methodologies for the identification of isoflavonoids in crude extracts. In addition, aims to assist dereplication procedures, to decrease the laborious isolation steps and orient the focused isolation of compounds of interest. As a proof of concept, the methanol extract of the stem bark of Amphimas pterocarpoides (Leguminosae) was selected. Based on chromatographic (retention time, polarity) and spectrometric features (ultraviolet spectra, accurate m/z, proposed elemental composition, ring double bond equivalent, and relative isotopic abundance) as well as HRMS/MS spectra, several isoflavonoids were identified. In order to verify the proposed structures, 11 isoflavonoids were selectively isolated and unambiguously identified using 1&2D nuclear magnetic resonance techniques. Moreover, the isolated isoflavonoids were studied in HRMS/MS level, employing electrospray ionization and atmospheric pressure chemical ionization sources, in both modes. Useful information regarding their fragmentation patterns was obtained, and characteristic diagnostic ions were defined for the identification of methoxylated isoflavones, dihydroisoflavones and 5‐hydroxylated isoflavonoids. Based on the current results, the proposed dereplication strategy was verified and could comprise a novel approach for the analysis of crude extracts in the future not only for isoflavonoids but also for other chemical classes of natural products. Copyright © 2013 John Wiley & Sons, Ltd.     

Uncommon perspectives in palladium- and copper-catalysed arylation and heteroarylation of terminal alkynes following Heck or Sonogashira protocols: Interactions copper/ligand,formation of diynes,reaction and processes in ionic liquids

Conjugated alkynes are recurring building blocks in natural products and in a wide range of important compounds, such as pharmaceuticals, agrochemicals, or molecular materials. The palladium-catalysed cross-coupling reaction between the sp²-hybridized carbon atoms of aryl, heteroaryl, and vinyl halides with the sp-hybridized carbon atoms of terminal alkynes is one of the most important developments in the field of alkyne chemistry over the past 50 years. Room for improvement still exists in these important reactions of direct arylation of terminal alkynes. In this prospect, the present authors have developed several strategies aiming at improving the reactivity, the selectivity, and several aspects of processes involving the palladium-catalysed alkyne arylation and heteroarylation reactions, in relation with sustainable chemistry. Various original approaches have thus been adopted: (i) the development of catalytic systems efficient at low metal loading below 1 mol% of palladium and copper (to reduce metal contamination) from polydentate ligands chemistry, (ii) the limitation of diyne formation by undesired side-reaction, this from a better mechanistic understanding and the innovating use of copper adducts, (iii) and the development of cost-efficient catalytic reactions in ionic liquid solvents. These topics have been developed with the general outlook of a large scope in organic synthesis. In addition, the investigation of recycling opportunities and the unprecedented production of extendedly conjugated bis(aryl)diynes has been also achieved. The present account reviews all this work, as it has been presented by the corresponding author at GECOM–CONCOORD 2012 as recipient of the 2012 European journal of Inorganic Chemistry Young Investigator Award.     

Model based prediction of the trap limited diffusion of hydrogen in post‐hydrogenated amorphous silicon

The diffusion of hydrogen within an hydrogenated amorphous silicon (a‐Si:H) layer is based on a trap limited process. Therefore, the diffusion becomes a self‐limiting process with a decreasing diffusion velocity for increasing hydrogen content. In consequence, there is a strong demand for accurate experimental determination of the hydrogen distribution. Nuclear resonant reaction analysis (NRRA) offers the possibility of a non‐destructive measurement of the hydrogen distribution in condensed matter like a‐Si:H thin films. However, the availability of a particle accelerator for NRR‐analysis is limited and the related costs are high. In comparison, Fourier transform infrared spectroscopy (FTIR) is also a common method to determine the total hydrogen content of an a‐Si:H layer. FTIR spectrometers are practical table‐top units but lack spatial resolution. In this study, an approach is discussed that greatly reduces the need for complex and expensive NRR‐analysis. A model based prediction of hydrogen depth profiles based on a single NRRA measurement and further FTIR measurements enables to investigate the trap limited hydrogen diffusion within a‐Si:H. The model is validated by hydrogen diffusion experiments during the post‐hydrogenation of hydrogen‐free sputtered a‐Si. The model based prediction of hydrogen depth profiles in a‐Si:H allows more precise design of experiments, prevents misinterpretations, avoids unnecessary NRRA measurements and thus saves time and expense. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)