Thermodynamic Properties and Melting Behavior of Bi–Sn–Zn Alloys

Summary. The partial and integral enthalpies of mixing of liquid Bi–Sn–Zn alloys were determined at 500°C by a drop calorimetric technique using a Calvet-type microcalorimeter. The ternary interaction parameters in the Bi–Sn–Zn system were fitted using the Redlich-Kister-Muggianu model for substitutional solutions, and isoenthalpy curves of the integral molar enthalpy of mixing at 500°C were constructed. Furthermore, a DSC technique was used to determine the liquidus temperatures in three sections (3, 5, and 7 at.% Zn) as well as the invariant reaction temperature of the ternary eutectic L ⇄ (Bi) + (Sn) + (Zn). The ternary eutectic reaction was found at 135°C.     

Renormalized inner projection—a case study: The octic oscillator

The upper and lower bounds of a harmonic oscillator with an octic perturbation are studied with the use of renormalized inner projection. It is shown that this relatively simple technique works even in the infinite coupling constant limit. Symbolic computation is very convenient and useful in these types of problems, where only a finite number of operations are required.     

Synthesis and x-ray crystal structure of [(THF)Zn(O(2)(OH)SiR)](4) (R = (2,6-i-Pr(2)C(6)H(3))N(SiMe(3))): enroute to larger aggregates

Reaction of aminosilanetriol RSi(OH)(3) (1) (R = (2,6-i-Pr(2)C(6)H(3))N(SiMe(3))) with diethyl zinc at room temperature in 1:1 stoichiometric ratio affords [(THF)Zn(O(2)(OH)SiR)](4) (2) (R = (2,6-i-Pr(2)C(6)H(3))N(SiMe(3))) in good yield. The single-crystal X-ray diffraction studies reveal that 2 is monoclinic, P2(1), with a = 17.117(3) A, b = 16.692(5) A, c = 17.399(4) A, alpha = gamma = 90 degrees, beta = 91.45(7) degrees, and Z = 2. The molecular structure of 2 contains two puckered eight-membered Zn(2)Si(2)O(4) rings, which are connected by the Zn-O bonds and form two planar four-membered Zn(2)O(2) rings. Compound 2 contains an unreacted hydroxyl group on each silicon atom, and hence, we carried out the reactions of 2 with dimethylzinc and methyllithium to form [Zn(4)(THF)(4)(MeZn)(4)(O(3)SiR)(4)] (3) (R = (2,6-i-Pr(2)C(6)H(3))N(SiMe(3))) and [(L)ZnLi(O(3)SiR)](4) (4) (L = 1,4-(Me(2)N)(2)C(6)H(4), R = (2,6-i-Pr(2)C(6)H(3))N(SiMe(3))), respectively. This suggested that 2 could be an intermediate product formed during the synthesis of 3 and 4.     

A New Alkylation-Elimination Method for Synthesis of Antiviral Fluoromethylenecyclopropane Analogues of Nucleosides

A new method for the synthesis of fluoromethylenecyclopropane nucleosides by alkylation-elimination procedure is described. Fluorination of methylenecyclopropane carboxylate 6 gave fluoroester 7. Treatment of 7 with phenylselenenyl bromide afforded the desired ethyl (E)-2-bromomethyl-1-fluoro-2-phenylselenenylcyclopropane-1-carboxylate 11 in 85% yield. DIBALH reduction of 11 gave 13, which after acetylation to 14 was reacted with 2-amino-6-chloropurine to give the 9-alkylated product 15 in 87% yield. Se-oxidation of 15 with hydrogen peroxide afforded 16, which underwent smooth elimination in a mixture of THF-DMF at 60 °C giving rise to a Z,E mixture of protected nucleosides 17. Deacetylation gave Z-1a and E-1a which were separated on a silica gel column. Both Z-1a and E-1a were converted into the respective guanine analogues Z-1b and E-1b.     

An investigation into the initial degradation steps of four major dye chromophores: study of their one-electron oxidation and reduction by EPR, ENDOR, cyclic voltammetry, and theoretical calculations

The degradation of dyes is frequently initiated by one-electron oxidation or reduction; however, relatively little is known about the initially formed radicals. Acid Green 25 (AG25), Crystal Violet (CVI), Methylene Blue (MB), and Acid Orange 7 (AO7), representing paradigms of four types of commercial organic dyes, were therefore investigated in terms of their redox behavior. Their redox potentials in MeCN and buffered aqueous solutions were determined by cyclic voltammetry. The structures of the one-electron reduced and oxidized dyes were established by EPR spectroscopy and by theoretical calculations on the density functional level of theory.     

Rheology of asphalts modified with glycidylmethacrylate functionalized polymers

Asphalt is known to be a colloidal suspension in which asphaltenes are covered by a stabilizing phase of polar resins and form complex micelles that are dispersed in the oily maltenic phase. In order to enhance its mechanical properties (e.g., in road paving), asphalts are often loaded with polymeric materials, thereby obtaining blends that can have different physical or chemical structures, depending on the composition of the added polymer. Asphalts modified by the addition of reactive ethylene terpolymers were prepared and their dielectric and rheological properties were measured both before and after a cure at high temperature. Even if it is not possible to determine the exact nature of the chemical interactions between asphalt and polymer, master curves obtained from dynamic data clearly show that during the cure the material tends to the behavior of a cross-linked network.     

4‐Acetamido‐3,3,5,5‐[2H4]‐2,2,6,6‐tetra­([2H3]methyl)piperidin‐1‐yloxyl 0.33‐hydrate

The asymmetric unit of the title compound, C₁₁H₅D₁₆N₂O₂·0.33H₂O, is formed by three crystallographically independent piperidin‐1‐yloxyl mol­ecules and a mol­ecule of water. The mol­ecules are crosslinked by nine hydrogen bonds into layers parallel with the ac plane. The water mol­ecule contributes to the stability of the low‐symmetry arrangement by four hydrogen bonds.     

Multi-element characterization of silicon nitride powders by atomic and mass spectrometric solution methods

A sample pretreatment technique for silicon nitride involving digestion and matrix/traces separation was developed by means of radiotracers and applied to analysis of this material by inductively coupled plasma atomic emission spectrometry, inductively coupled plasma mass spectrometry and graphite furnace atomic absorption spectrometry. The results obtained for a high purity silicon nitride material by these methods are compared each with the other and with those obtained by neutron activation analysis. The limits of detection and the capabilities of the methods are compared and discussed.     

An automated method for the analysis of stable isotope labeling data in proteomics

An algorithm is presented for the generation of a reliable peptide component peak table from liquid chromatography-mass spectrometry (LC-MS) and subsequent quantitative analysis of stable isotope coded peptide samples. The method uses chemical noise filtering, charge state fitting, and deisotoping toward improved analysis of complex peptide samples. Overlapping peptide signals in mass spectra were deconvoluted by correlation with modeled peptide isotopic peak profiles. Isotopic peak profiles for peptides were generated in silico from a protein database producing reference model distributions. Doublets of heavy and light labeled peak clusters were identified and compared to provide differential quantification of pairs of stable isotope coded peptides. Algorithms were evaluated using peptides from digests of a single protein and a seven-protein mixture that had been differentially coded with stable isotope labeling agents and mixed in known ratios. The experimental results correlated well with known mixing ratios.