RuH2和RuN2电子组态与光谱性质的从头计算

用量子化学从头算方法在B3LYP/6 311G 的水平上 ,研究了RuH2 和RuN2 可能的电子组态和光谱性质 .结果表明 ,RuH2 的3 B2 和5Σ-态对应于静电作用的物理吸附态 .RuN2 的一重态和三重态的计算结果跟钌单晶面上的实验值相接近 .而RuN2 在C∞v对称性时 ,五重态5Σ-的计算频率比实验值稍低 .在C2v对称性时 ,五重态的计算频率值则更低 ,3 B2 和5A1态不能稳定存在     

300kVA高温超导变压器电流引线漏热损耗的测量

电流引线是高温超导变压器的主要外部漏热来源,它的漏热量直接影响了超导变压器的经济性能,因此,引线的设计与漏热测量一直备受关注。文中构建了一个实验方案,运用量热法测量低压引线的漏热,并将试验结果与仿真预期值进行了对比和分析,从而验证了仿真设计的正确性。     

Thiol- and disulfide-modified oligonucleotide monolayer structures on polycrystalline and single-crystal Au(111) surfaces

We provide a comprehensive study of single- (ss) and double-strand (ds) oligonucleotides with either 25 or 10 bases or base pairs (bp) immobilized on polycrystalline and single-crystal Au(111) surfaces. The study is based on X-ray photoelectron spectroscopy, cyclic and differential pulse voltammetry, interfacial capacitance data, and electrochemical scanning tunnelling microscopy (in situ STM). The sequences used were the 25-bp sequence from the BRCA1 gene (25-mer), while the 10-bp oligonucleotides contained solely linear adenine and thymine sequences. The oligonucleotides were modified by the dimethoxytrityl group (DMT) via a disulfide group [DMT-S-S-ss25-mer and DMT-S-S-ds(AT)₁₀], a pure disulfide group (A₁₀-S-S-T₁₀), or a thiol group [HS-ss25-mer and HS-ds-(AT)₁₀], all via a hexamethylene linker. The overall pattern suggests strategies for controlled adsorption of DNA-based molecules and recognition of complementary strands or other molecules.     

Coexistence of multiple conformations in cysteamine monolayers on Au(111)

The structural organization, catalytic function, and electronic properties of cysteamine monolayers on Au(111) have been addressed comprehensively by voltammetry, in situ scanning tunneling microscopy (STM) in anaerobic environment, and a priori molecular dynamics (MD) simulation and STM image simulation. Two sets of voltammetric signals are observed. One peak at -(0.65-0.70) V (SCE) is caused by reductive desorption of cysteamine. The other signal, at -(0.25-0.40) V consists of a peak doublet. The pH dependence of the latter suggests that the origin is catalytic dihydrogen evolution. The doublet feature is indicative of two distinct cysteamine configurations. Cysteamine monolayer formation from initial nucleation to a highly ordered phase has been successfully observed in real time using oxygen-free in situ STM. Random cellular patterns, disordered adlayer formation accompanied by high step edge mobility, and ultimately a highly ordered (square root 3 x 4) R30 degrees lattice are observed sequentially. Pits are formed due to enclosure of the mobile edges during the adsorption process. In the highly ordered cysteamine layer, each unit has two spots with apparent 0.6 A height difference in STM images. The coverage 5.7 +/- 0.1 x 10(-10) mol cm(-2) determined by voltammetry supports that the spots represent two individual cysteamine molecules. A priori MD and density functional simulations hold other clues to the image interpretation and indicate that the NH(3)(+) groups dominate the tunneling contrast. A wide range of interface structures, showing variations in the sulfur binding site and orientation, gauche and trans conformers, and especially hydrogen-bonding interactions, are examined, from which it is concluded that the adsorbate structure is controlled by interactions with the solvent rather than with the substrate.     

邻苯二胺、邻氨基酚的电化学聚合及聚合的膜性质

邻苯二胺(ODB), 邻氨基酚(OAP)在酸性水溶液中易电聚合, 可形成致密的聚合膜。聚邻苯二胺(PODB)在PH<4时具有电活性, 其氧化还原反应与电变色效应对应。聚邻苯二胺,聚邻氨基酚(POAP)膜电极电位在pH=4～10范围对pH有Nernst响应, 电极系数分别为59mV/pH和57mV/pH。响应时间小于3分钟。PODB, POAP膜能与Ni~(2+), Co~(2+)过渡金属离子形成稳定的聚合络合膜。此膜在碱性介质中具有稳定的循环伏安行为, 膜中的金属离子可被H~+交换。PODB电极的—NH_2基可再修饰引入醌/氢醌功能团。     

Gold nanoparticle arrays directly grown on nanostructured indium tin oxide electrodes: Characterization and electroanalytical application

This work describes an improved seed-mediated growth approach for the direct attachment and growth of mono-dispersed gold nanoparticles on nanostructured indium tin oxide (ITO) surfaces. It was demonstrated that, when the seeding procedure of our previously reported seed-mediated growth process on an ITO surface was modified, the density of gold nanospheres directly grown on the surface could be highly improved, while the emergence of nanorods was restrained. By field emission scanning electron microscopy (FE-SEM) and cyclic voltammetry, the growth of gold nanoparticles with increasing growth time on the defect sites of nanostructured ITO surface was monitored. Using a [Fe(CN)₆]³⁻/[Fe(CN)₆]⁴⁻ redox probe, the increasingly facile heterogeneous electron transfer kinetics resulting from the deposition and growth of gold nanoparticle arrays was observed. The as-prepared gold nanoparticle arrays exhibited high catalytic activity toward the electrooxidation of nitric oxide, which could provide electroanalytical application for nitric oxide sensing.     

Phenolic Glycosides from Orostachys malacophylla

Chemistry of Natural Compounds -     

Design of robust differential microphone arrays with the Jacobi–Anger expansion

Due to their small size, differential microphone arrays (DMAs) are very attractive. Moreover, they have been effective in combating noise and reverberation. Recently, a new class of DMAs of different orders have been developed with the MacLaurin’s series and the frequency-independent patterns. However, the MacLaurin’s series does not approximate well the exponential function, which appears in the general definition of the beampattern, when the intersensor spacing is not small enough. To circumvent this problem, we propose in this paper to approximate the exponential function with the Jacobi–Anger expansion. Based on this approximation and the frequency-independent Chebyshev patterns, we derive first-, second-, and third-order DMAs. Furthermore, in order to improve the robustness of DMAs against white noise amplification, we propose to use more microphones combined with minimum-norm filters. It is also shown that the Jacobi–Anger expansion is optimal from a mean-squared error perspective. Simulations are carried out to evaluate the performance of the proposed DMAs.     

移动机器人目标识别算法

针对移动机器人在目标识别过程中对视觉图像特征点提取慢,匹配不准确等特点,提出了一种基于SIFT算法的改进目标识别算法。通过采用组合匹配策略,将特征关键点间的距离和内积同时进行考察,根据其自身值的大小,决定对匹配相似度的贡献。组合策略的引入有效地解决了机器人在目标识别中对相同特征图像不能匹配和不同特征图像能够匹配的问题。为克服目标匹配时实性差的弱点,以关键点为根据构建K维树结构,采用最近邻点搜索,快速找出正确匹配的特征点。为实现移动机器人目标识别过程中的自主性,在特征点匹配过程中引入自适应阈值进行判断。实验表明,该方法对移动机器人目标识别准确率有较大提升,能够满足移动机器人在目标识别和跟踪过程中对视频图像处理的实时性和准确性的要求。     

激光打孔对氮化铝绝缘性能的影响

氮化铝陶瓷具有优良的绝缘和导热性能,是传导冷却超导电力装置绝缘与导热连接件的首选,激光切割是对其进行加工的最有效方法,但激光切割可能对其绝缘性能产生影响,进而影响超导电力装置的安全运行。基于此,通过对激光打孔前后氮化铝基片孔周区域绝缘电阻的测量、金相结构和扫描电镜成分的比较,分析了激光打孔对氮化铝绝缘性能的影响,并总结了选用氮化铝基片作为超导电力装置电流引线的绝缘与导热垫片应注意的问题。