Syndiotactic 1,2-polybutadiene with Co-CS2 catalyst system. IV. Mechanism of syndiotactic polymerization of butadiene with cobalt compounds–organoaluminum–CS2

A mechanism is proposed for the polymerization of syndiotactic 1,2-polybutadiene (s-PB) with soluble cobalt-organoaluminum-CS₂. The proposed active species have structures which consist of side-on coordination of CS₂ to cobalt, anti-π-allyl growing end, cisoid bidentate coordination of butadiene, and activation by complex formation with organoaluminum at the nonbonded sulfur of the coordinated CS₂. This proposal is based on findings for the aluminum-free catalyst Co(C₄H₆)(C₈H₁₃)-CS₂. It is tentatively interpreted that syndiotactic 1,2 polymerization proceeds under the influence of the side-on coordinated CS₂, by which the reactivity between the terminal carbons of butadiene and the C3 of the π-allyl end is enhanced.     

Differentiation of opium and poppy straw using capillary electrophoresis and pattern recognition techniques

Opium samples from four different locations and poppy straw from different plant varieties have been assayed using micellar capillary electrophoresis incorporating a sweeping technique. Individual alkaloids (morphine, codeine, papaverine, noscapine, thebaine, oripavine, reticuline and narceine) were quantitatively determined in the different samples by a validated capillary electrophoresis method. Unsupervised pattern recognition of the opium samples and the poppy straw samples using hierarchical cluster analysis (HCA) and principal component analysis (PCA), showed distinct clusters. Supervised pattern recognition using soft independent modelling of class analogy (SIMCA) was performed to show individual groupings and allow unknown samples to be classified according to the models built using the CZE assay results.     

Nanofibers of barium strontium titanate (BST) by sol-gel processing and electrospinning

This paper describes the fabrication of barium strontium titanate (Ba0.6Sr0.4TiO3 or BST) nanofibers by electrospinning method using a solution that contained poly(vinylpyrrolidone) and a sol-gel solution of BST. The as-spun and calcined BST/PVP composite nanofibers were characterized by TG-DTA, X-ray diffraction, FT-IR, SEM and TEM, respectively. After calcination of the as-spun BST/PVP composite nanofibers at above 700 degrees C in air for 2 h, BST nanofibers of 188+/-25 nm in diameter having well-developed cubic-perovskite structure were successfully obtained. The crystal structure and morphology of the nanofibers were influenced by the calcination temperature. Calcination at below 700 degrees C resulted in amorphous phase whereas BST with second phase such as barium titanate were formed at above 700 degrees C. Diameters of the nanofibers decreased from 208+/-35 to 161+/-18 nm with increasing calcination temperature between 600 and 800 degrees C.     

Syndiotactic 1,2-polybutadiene with Co-CS2 catalyst system. II. Catalysts for stereospecific polymerization of butadiene to syndiotactic 1,2-polybutadiene

Butadiene is polymerized by cobalt compound–organoaluminum–CS₂ catalysts to give highly crystalline syndiotactic 1,2-polybutadiene (s-PB) having melting point up to 216°C. An aluminum-free catalyst, Co(C₄H₆)(C₈H₁₃)-CS₂, is also effective. Syndiotactic polymerization with Co(C₄H₆)(C₈H₁₃)-CS₂ is not interrupted by the addition of protic substances such as water and alcohol, but is influenced by donor or acceptor substances. The donor molecule, e.g., dimethylsulfoxide or dimethylformamide, decreases the stereoregularity, i.e., syndiotacticity and 1,2 content. An acceptor molecule of organoaluminum with appropriate acidity such as AlEt₃-AlEt₂Cl or tetraethylaluminoxane increases the molecular weight, stereoregularity, and yield of the polymer. In the presence of CS₂ a mixture of cis-PB and s-PB was obtained by using Co(octoate)₂-AlEt₂Cl-H₂O, with molar ratio H₂O/Co less than unity. In the case of H₂O/Co > 1, only cis-PB was obtained. By the addition of donor substances such as ester, ether, nitrile, and AlEt₃, s-PB was obtained even when H₂O/Co > 1. The amount and ratio of cis-PB and s-PB are dependent upon the nature and amount of the additives.     

Effects of calcining temperature on structural and magnetic properties of nanosized Fe-doped NiO prepared by diol-based sol−gel process

Iron-doped nickel oxide (Fe_0.01Ni_0.99O, abbreviated as FNO) nanoparticles were prepared by sol–gel process using 1,3-propanediol as a solvent and also as a chelating agent, and calcined at the various temperatures (400–1000 °C) for 2 h. The phase composition and the microstructure of the calcined products were investigated by X-ray diffraction and scanning electron microscopy techniques, respectively. Magnetic properties were measured at room temperature using a vibrating sample magnetometer. All calcined samples showed the single phase of FNO cubic rock-salt structure without the presence of any impurity phases. The crystallite size from XRD and particle size from SEM increased as calcining temperature increased. The FNO powders calcined at 400?600 °C revealed the uniform and dense spherical particles in nanosize. The room-temperature ferromagnetism was observed for all samples. When the calcining temperature was increased, the saturation magnetization decreased whereas the coercivity increased, corresponding to the less dense and larger particles. The calcined sample at 400 °C had the best magnetic properties with the highest M_s of 5.34 emu/g (at 10 kOe) and the lowest H_c of 372 Oe.     

Synthesis of alkyl sulfonate/alcohol-protected gamma-Fe(2)O(3) nanocrystals with narrow size distributions

Highly crystalline gamma-Fe(2)O(3) nanoparticles with narrow size distributions that are coated with 1-undecanesulfonic acid were synthesized via two distinct approaches using oxidation and site-exchange reactions. However, similar nanocrystals protected with 1-octanol could only be achieved via the site-exchange method, while the oxidation approach led to Fe(2)O(3) nanoparticles of poor crystallinity and size uniformity. Our magnetization measurements confirmed the superparamagnetic nature of our Fe(2)O(3) nanoparticle products and the effects of the coating materials on magnetization properties.     

Recycling of homogeneous Pd catalysts using superparamagnetic nanoparticles as novel soluble supports for Suzuki, Heck, and Sonogashira cross-coupling reactions

Recycling of homogeneous catalysts could be achieved by using magnetic nanoparticles and solid-phase beads, but nanoparticle-supported catalysis proceeded much faster than its counterpart on resins.     

重离子治癌终端的束流强度及剂量监测系统

 为实现重离子肿瘤治疗临床实验中对照射束流状态的实时监测,研制了束流强度及剂量监测系统,包括积分电离室、后续电流频率转换电路及LabVIEW数据获取处理三部分。利用闪烁体探测器和标准剂量计测试了系统的线性响应和得到剂量的准确性,结果表明：系统在束流临床照射流强范围内的线性响应好于90%,其实时反馈的临床照射剂量偏差小于5%。同时束流强度及剂量监测系统与安全控制系统相结合,保证束流照射状态满足临床照射的安全要求。     

白光和红绿蓝光LED可调光源研制

为了提高LED光源色温和亮度的调节精度和准确度,结合色温由低向高变化时光色所呈现的渐变特点,提出了一种低色温白光LED灯珠、高色温白光LED灯珠加红绿蓝光LED灯珠补偿式调光的方法.将色温分成三个部分进行调节,每个部分选用不同的LED灯珠组合来进行调光.实验结果表明:不同组合情况下的LED光源的初始输出色温相对于目标值的偏差范围在1％以内;亮度可以在保证色温不变的情况下独立进行调节,初始输出值与目标值的偏差范围在1％以内;经过微调之后可以达到目标值;达到了色温和亮度独立调节的要求;光源发光稳定,不会因为长时间工作而影响调节精度.