Biocompatible polymers for antibody support on gold surfaces

The elimination or minimization of non-specific protein adsorption from serum is critical for the use of surface plasmon resonance (SPR) sensors for in vitro and in vivo analysis of complex biological solutions. The ultimate goals in this application are to minimize non-specific adsorption of protein and to maximize analyte signal. A reduction of the non-specific protein adsorption from serum of up to 73% compared to carboxymethylated-dextran 500 kDa (CM-dextran) was achieved following a survey of eight biocompatible polymers and 10 molecular weights of CM-dextran. These coatings minimize non-specific adsorption on the sensor while also serving as immobilization matrices for antibody fixation to the probes. Polymers including polysaccharides: CM-dextrans, CM-hyaluronic acid, hyaluronic acid, and alginic acid were investigated. Humic acid, polylactic acid, polyacrylic acid, orthopyridyldisuldfide–polyethyleneglycol–N-hydroxysuccinimide (OPSS–PEG–NHS), and a synthesized polymer; polymethacrylic-acid-co-vinyl-acetate (PMAVA) were also used. The non-specific protein adsorption reduction was measured over a 14 day period at 0 °C for each polymer. Calibration curves using some of these polymers were constructed to show the performance and low detection limit possibilities of these new antibody supports. For many of the polymers, this is the first demonstration of employment as an antibody support for an optical or surface active sensor. CM-dextran is the polymer offering the largest signal for the antigen detection. However, the biocompatible polymers demonstrate a greater stability to non-specific binding in serum. These biocompatible polymers offer different alternatives for CM-dextran.     

Half-sandwich and mixed-ring uranium complexes

The monocyclooctatetraene uranium complex [U(COT)(I)₂(THF)₂] (COT=η-C₈H₈; THF=tetrahydrofuran), isolated from the reaction of bis(cyclooctatetraene)uranium with iodine, is a precursor for the synthesis of the alkyl derivatives [U(COT)(CH₂Ph)₂i (HMPA) ₂], [U(COT)(CH₂SiMe₃)₂(HMPA)] (HMPA=hexamethyl phosphorous triamide) and [U(COT)CH₂SiMe₃)₃] [Li(THF)₃] and of the mixed-ring compounds [U(COT)(η-C₅R₅)(I)] (R=H or Me). The last were used to prepare the amide and alkyl complexes [U(COT)(η-C₅H₅)(N{SiMe₃}₂)] and [U(COT)(η-C₅Me₅)(CH₂SiMe₃)].     

Bis‐clickable Mesoporous Silica Nanoparticles: Straightforward Preparation of Light‐Actuated Nanomachines for Controlled Drug Delivery with Active Targeting

Bis(clickable) mesoporous silica nanospheres (ca. 100 nm) were obtained by the co‐condensation of TEOS with variable amounts (2–5 % each) of two clickable organosilanes in the presence of CTAB. Such nanoparticles could be easily functionalized with two independent functions using the copper‐catalyzed alkyne‐azide cycloaddition (CuAAC) reaction to transform them into nanomachines bearing cancer cell targeting ligands with the ability to deliver drugs on‐demand. The active targeting was made possible after anchoring folic acid by CuAAC click reaction, whereas the controlled delivery was performed by clicked azobenzene fragments. Indeed, the azobenzene groups are able to obstruct the pores of the nanoparticles in the dark whereas upon irradiation in the UV or in the blue range, their trans‐to‐cis photoisomerization provokes disorder in the pores, enabling the delivery of the cargo molecules. The on‐command delivery was proven in solution by dye release experiments, and in vitro by doxorubicin delivery. The added value of the folic acid ligand was clearly evidenced by the difference of cell killing induced by doxorubicin‐loaded nanoparticles under blue irradiation, depending on whether the particles featured the clicked folic acid ligand or not.     

A Designed 5‐Fluorouracil‐Based Bridged Silsesquioxane as an Autonomous Acid‐Triggered Drug‐Delivery System

Two new prodrugs, bearing two and three 5‐fluorouracil (5‐FU) units, respectively, have been synthesized and were shown to efficiently treat human breast cancer cells. In addition to 5‐FU, they were intended to form complexes through H‐bonds to an organo‐bridged silane prior to hydrolysis‐condensation through sol–gel processes to construct acid‐responsive bridged silsesquioxanes (BS). Whereas 5‐FU itself and the prodrug bearing two 5‐FU units completely leached out from the corresponding materials, the prodrug bearing three 5‐FU units was successfully maintained in the resulting BS. Solid‐state NMR (²⁹Si and ¹³C) spectroscopy show that the organic fragments of the organo‐bridged silane are retained in the hybrid through covalent bonding and the ¹H NMR spectroscopic analysis provides evidence for the hydrogen‐bonding interactions between the prodrug bearing three 5‐FU units and the triazine‐based hybrid matrix. The complex in the BS is not affected under neutral medium and operates under acidic conditions even under pH as high as 5 to deliver the drug as demonstrated by HPLC analysis and confirmed by FTIR and ¹³C NMR spectroscopic studies. Such functional BS are promising materials as carriers to avoid the side effects of the anticancer drug 5‐FU thanks to a controlled and targeted drug delivery.     

Gas-Phase Lithium Cation Basicity: Revisiting the High Basicity Range by Experiment and Theory

According to high level calculations, the upper part of the previously published FT-ICR lithium cation basicity (LiCB at 373 K) scale appeared to be biased by a systematic downward shift. The purpose of this work was to determine the source of this systematic difference. New experimental LiCB values at 373 K have been measured for 31 ligands by proton-transfer equilibrium techniques, ranging from tetrahydrofuran (137.2 kJ mol^?1) to 1,2-dimethoxyethane (202.7 kJ mol^?1). The relative basicities (ΔLiCB) were included in a single self-consistent ladder anchored to the absolute LiCB value of pyridine (146.7 kJ mol^?1). This new LiCB scale exhibits a good agreement with theoretical values obtained at G2(MP2) level. By means of kinetic modeling, it was also shown that equilibrium measurements can be performed in spite of the formation of Li⁺ bound dimers. The key feature for achieving accurate equilibrium measurements is the ion trapping time. The potential causes of discrepancies between the new data and previous experimental measurements were analyzed. It was concluded that the disagreement essentially finds its origin in the estimation of temperature and the calibration of Cook’s kinetic method. Graphical Abstract

?     

Total Chemical Synthesis of Biologically Active Fluorescent Dye‐Labeled Ts1 Toxin

Ts1 toxin is a protein found in the venom of the Brazilian scorpion Tityus serrulatus. Ts1 binds to the domain II voltage sensor in the voltage‐gated sodium channel Nav and modifies its voltage dependence. In the work reported here, we established an efficient total chemical synthesis of the Ts1 protein using modern chemical ligation methods and demonstrated that it was fully active in modifying the voltage dependence of the rat skeletal muscle voltage‐gated sodium channel rNav1.4 expressed in oocytes. Total synthesis combined with click chemistry was used to label the Ts1 protein molecule with the fluorescent dyes Alexa‐Fluor 488 and Bodipy. Dye‐labeled Ts1 proteins retained their optical properties and bound to and modified the voltage dependence of the sodium channel Nav. Because of the highly specific binding of Ts1 toxin to Nav, successful chemical synthesis and labeling of Ts1 toxin provides an important tool for biophysical studies, histochemical studies, and opto‐pharmacological studies of the Nav protein.     

2-Groupe des classes positives d'un corps de nombres et noyau sauvage de la K-théorie

We compute the 2-rank of the wild kernel WK₂(F) of a number field by constructing a 2-class group ad hoc. The main result generalizes in the more intricate case the canonical isomorphism established for odd primes under the assumption in a previous article (cf. (Acta. Arith. 67 (1994) 335; Math. Z. 238 (2001) 335)). It involves a criterium of triviality for the 2-part of the wild kernel of Galois number fields and, in the particular case of quadratic fields, it leads to a logarithmic interpretation of the diophantine conditions obtained by other authors.     

Concentration of sodium ion as the determining factor for the association of dansyl amino acids with the teicoplanin molecule in reversed-phase liquid chromatography

The mechanism of the binding of D,L dansyl amino acids to teicoplanin was investigated. Na+ was used as an indicator of the interactions between the solutes and teicoplanin. The number (n) of sodium ions, Na+, excluded from the solute-teicoplanin interface when analyte transfer occurred was determined. A thermodynamic study and enthalpy-entropy compensation were performed to further explore the interaction mechanism. From these results, it was shown that teicoplanin was balanced between 2 conformational states characterized by distinct enantioselective properties. This approach indicates that liquid chromatography (LC) is a useful tool to extract physicochemical and molecular information from retention data. Thus, LC can be used as a complementary technique with the conventional techniques of molecular interaction analysis.