Current perspectives on quinazolines with potent biological activities: A review

Quinazoline is a heterocyclic compound having biological activities. It is aromatic in nature having bicyclic structure containing benzene ring and pyrimidine ring. Quinazoline and its derivatives are found to have wide range of biological activities that is anticancer, analgesic, antimicrobial, antihypertensive, anticonvulsant, antimalarial, antitumor, and anti-tubercular activities. The purpose of this review is to highlight the recent researches made by researchers on various biological activities of quinazoline derivatives on different targets.     

Preparation of activated carbon filled epoxy nanocomposites

Activated carbon derived from oil palm empty fruit bunch (AC-EFB), bamboo stem (AC-BS), and coconut shells (AC-CNS) were obtained by pyrolysis of agricultural wastes using two chemical reagents (H₃PO₄ or KOH). The AC-EFB, AC-BS and AC-CNS were used as filler in preparation of epoxy nanocomposites. Epoxy nanocomposites prepared at 1, 5 and 10 % activated carbons filler loading using KOH and H₃PO₄ chemical agents. Transmission electron microscopy confirms better dispersion of the nano-activated carbons in the epoxy matrix at 5 % activated carbon. The presence of 5 % AC-CNS in the epoxy matrix using H₃PO₄ chemical reagent resulted in an improvement of the thermal stability of epoxy matrix. KOH treated AC filled epoxy nanocomposites were slightly better in thermal stability as compared to H₃PO₄ treated AC filled epoxy nanocomposites, may be due to better interaction of filler with epoxy matrix. Thermal analysis results showed that thermal stability of the activated carbon filled epoxy nanocomposites improved as compared to the neat epoxy matrix. The degree of crystallinity of epoxy matrix was improved by adding the activated carbon due to interfacial interaction between AC and epoxy matrix rather than loading of AC alone. Developed nanocomposites from biomass (agricultural wastes) materials will help to reduce the overall cost of the materials for its demanding applications as insulating material.     

Flame Retardancy and Kinetic Behavior of Ammonium Polyphosphate–Treated Unsaturated Polyester/Phenolic Interpenetrating Polymer Network

In this study, the flammability and kinetic behavior of flame retardant unsaturated polyester (UP)/phenolic resin were investigated. The flame retardant ammonium polyphosphate (APP) was used in this research to improve the flame resistance of a UP/phenolic resin interpenetrating polymer network (IPN). The flame resistance of UP improved from none to V-0 classification by adding phenolic resin and APP. Kinetic behavior study of UP, UP/phenolic, and APP-filled UP/phenolic IPN was carried out by the Borchardt and Daniels method. The results indicated that modification of flammable UP resin markedly improved the total heat release volume of UP and the flame retardancy of the IPN network structure was also enhanced.     

Dynamic Mechanical Properties of Activated Carbon–Filled Epoxy Nanocomposites

Nano-activated carbons obtained from oil palm empty fiber bunch (AC-EFB), bamboo stem (AC-BS), and coconut shells (AC-CNS) were reinforced in epoxy matrix to fabricate epoxy nanocomposites. The dynamic mechanical analysis of epoxy nanocomposites was carried out, and 5% AC-CNS treated with KOH-filled epoxy composites displayed the highest storage modulus of all the activated carbon–filled epoxy composites. The incorporation of a small amount of AC-BS, AC-EFB, and AC-CNS to the epoxy matrix enhanced the damping characteristics of the epoxy nanocomposites. The 5% AC-EFB treated with H₃PO₄ filled epoxy composites showed the highest glass transition temperature (T_g) in all temperature ranges.     

Effect of Oil Palm and Jute Fiber Treatment on Mechanical Performance of Epoxy Hybrid Composites

In this work, oil palm empty fruit bunch (EFB) and jute fibers were treated with 2-hydroxy ethyl acrylate (2-HEA) to improve interfacial bonding of oil palm EFB and jute fibers with epoxy matrix. Hybrid composites were fabricated by incorporation of modified oil palm EFB and jute fibers into an epoxy matrix by the hand lay-up technique. Mechanical (flexural and impact) and morphological properties of modified hybrid composites were measured. Results indicated that flexural and impact properties of modified fiber–reinforced hybrid composites improved as compared to untreated hybrid composites due to better fiber/matrix interfacial bonding, which was confirmed by scanning electron microscopy. We confirmed that treated oil palm/jute hybrid composite may be fabricated by advanced techniques such as resin transfer molding, extrusion, and injection molding for industrial applications in the automotive sector.     

Geometric coupling effects on the bifurcations of a flexible rotor response in active magnetic bearings

This work reports on a numerical investigation on the bifurcations of a flexible rotor response in active magnetic bearings taking into account the nonlinearity due to the geometric coupling of the magnetic actuators as well as that arising from the actuator forces that are nonlinear function of the coil current and the air gap. For the values of design and operating parameters of the rotor-bearing system investigated in this work, numerical results showed that the response of the rotor was always synchronous when the values of the geometric coupling parameter α were small. For relatively larger values of α, however, the response of the rotor displayed a rich variety of nonlinear dynamical phenomena including sub-synchronous vibrations of periods-2, -3, -6, -9, and -17, quasi-periodicity and chaos. Numerical results further revealed the co-existence of multiple attractors within certain ranges of the speed parameter Ω. In practical rotating machinery supported by active magnetic bearings, the possibility of synchronous rotor response to become non-synchronous or even chaotic cannot be ignored as preloads, fluid forces or other external excitation forces may cause the rotor’s initial conditions to move from one basin of attraction to another. Non-synchronous and chaotic vibrations should be avoided as they induce fluctuating stresses that may lead to premature failure of the machinery’s main components.     

A review on potential development of flame retardant kenaf fibers reinforced polymer composites

Kenaf fibers have been extensively explored from the past few decades in polymer composites industries owing to its extensive adaptations, excellent properties together with its comparable mechanical properties to traditional glass fibers polymer composites. The combustibility or lowered flame retardancy hampered the diverse applications of kenaf fibers reinforced polymer composites, as it affects the mechanical strength and stiffness of composites during fire. Current review article intended to be a comprehensive source of published literature involving the flame retardants (FRs), types and applications of FRs and the fabrication of kenaf fibers reinforced polymer composites. This article will also provide a perfect data on the recent development of the FR kenaf fibers polymer composites with different FRs and explored its structural and semi‐structural industrial application for performing further research in this topic. Copyright © 2016 John Wiley & Sons, Ltd.     

Determination of cadmium in urine by extraction and flameless atomic-absorption spectrophotometry Comparison of urine from smokers and non-smokers of different sex and age

A method is presented for determining cadmium in urine by nameless atomic-absorption spectrophotometry after extraction. The sample is dried, ashed in the presence of nitric acid, and then the residue is dissolved in hydrochloric acid. Cadmium is extracted as its tetrahexylammonium iodide complex into methyl isobutyl ketone. The organic phase is analysed for cadmium by atomic-absorption spectrophotometry with electrothermal atomization. The median urinary excretion of cadmium for smokers aged 50-64 has been found to be 0.7 and 0.75 mug l . for males and females respectively, the values for non-smokers being 0.25 and 0.4mug l .     

Glutaric Acid Assisted Fabrication of CuO Nanostructures and their Application in Development of Highly Sensitive Electrochemical Sensor System for Carbamates

This work describes the fabrication of unique arrow head shaped CuO nanostructures using simple hydrothermal treatment method. The highly attractive features were obtained by the application of glutaric acid utilised simultaneous as template and functionalising agent. The functionalised nanostructures were known to possess excellent potential towards the electro‐catalytic oxidation of carbofuran pesticide. The generated intense electrochemical signal with lower potential value enabled sensitive and selective determination of carbofuran up to 1×10^?3 µM with wide sensing window in range of 0.01 to 0.16 µM. The feasibility of the developed sensor system for the practical application was also studied by testing its potential in real sample extracts of various vegetables. The excellent recoveries demonstrated the analytical robustness of the developed sensor system. The sensor system utilises a new and simple approach towards sensitive determination of toxic pesticides reflecting its wide spectrum application in various fields.     

Photochemistry of desonide, a non-fluorinated steroidal anti-inflammatory drug

The photochemistry of anti-inflammatory drug desonide (De, 1) was studied in aerobic as well as in anaerobic condition with different irradiation wavelengths (254, 310 nm) in acetonitrile and 2-propanol. All photoproducts obtained were isolated and characterized on the basis of IR, (1)H-, (13)C-NMR spectroscopy and elemental analysis study. The products were: 11beta,21-dihydroxy-16alpha,17alpha-(1-methylethylidenedioxy)-1,5-cyclopregn-3-ene-2,20-dione 2 (254 nm), 11beta-hydroxy-16alpha,17alpha-(1-methylethylidenedioxy)androsta-1,4-diene-3-one 3 (310 nm/2-propanol), 17beta-hydroperoxy-11beta-hydroxy-16alpha,17alpha-(1-methylethylidenedioxy)androsta-1,4-diene-3-one 4 (310 nm/O(2)/2-propanol). Cyclohexadienone moiety in ring A and keto group at C(17) were found to be deeply modified by UV light therefore, loss of biological activity both during storage and in vivo can not be ruled out.