Cymodienol and cymodiene: new cytotoxic diarylheptanoids from the sea grass Cymodocea nodosa

The two new diarylheptanoids, cymodienol (1), and cymodiene (2), obtained from specimens of the sea grass Cymodocea nodosa, collected from the coastal areas of central Greece, are the first members of this class isolated from marine organisms. The chemical structures of the two metabolites were assigned on the basis of their NMR and MS spectroscopic data, including information obtained by 1D- and 2D-NMR experiments. Metabolite 2 possesses an unprecedented skeleton that might be biosynthetically related to metabolite 1. Cymodienol (1) was found to exhibit significant cytotoxic activity against two lung cancer cell lines.     

Can a Procedure for the Growth of Single-layer Graphene on Copper be used in Different Chemical Vapor Deposition Reactors?

In the last decade, catalytic chemical vapor deposition (CVD) has been intensively explored for the growth of single-layer graphene (SLG). Despite the scattering of guidelines and procedures, variables such as the surface texture/chemistry of catalyst metal foils, carbon feedstock, and growth process parameters have been well-scrutinized. Still, questions remain on how best to standardize the growth procedure. The possible correlation of procedures between different CVD setups is an example. Here, two thermal CVD reactors were explored to grow graphene on Cu foil. The design of these setups was entirely distinct, one being a “showerhead” cold-wall type, whereas the other represented the popular “tubular” hot-wall type. Upon standardizing the Cu foil surface, it was possible to develop a procedure for cm²-scale SLG growth that differed only by the carrier gas flow rate used in the two reactors.     

Flow-injection spectrophotometric determination of chloramben

Abstract

A method for the dechlorination of PCB mixtures (Aroclor formulations) to biphenyl was extended to soils. The contaminated sample was mixed with magnesium flakes, potassium hexachloropalladiate (K₂PdCl₆), propan-2-ol and water then permitted to react for up to six hours. Biphenyl, recovered by extraction into hexane, was quantified by gas chromatography with flame ionization detection. The reaction was very efficient in propan-2-ol / water (～95%), surfactant emulsion or sand mixture and virtually complete in soil provided that excess magnesium (2 g) and the K₂PdCl₆ were added to the sample prior to the addition of water. Higher PCB loadings were readily determined in field contaminated soils either by direct determination within the matrix or by standard additions. However, analyte concentrations were appreciably over-estimated in Soxhlet or sonication extracts of a certified reference material that contained sub-ppm levels of analyte. The over-estimation is considered to result from the conversion in part of natural organic matter to biphenyl.     

Selective Uptake of Cylindrical Poly(2‐Oxazoline) Brush‐AntiDEC205 Antibody‐OVA Antigen Conjugates into DEC‐Positive Dendritic Cells and Subsequent T‐Cell Activation

To achieve specific cell targeting by various receptors for oligosaccharides or antibodies, a carrier must not be taken up by any of the very many different cells and needs functional groups prone to clean conjugation chemistry to derive well‐defined structures with a high biological specificity. A polymeric nanocarrier is presented that consists of a cylindrical brush polymer with poly‐2‐oxazoline side chains carrying an azide functional group on each of the many side chain ends. After click conjugation of dye and an anti‐DEC205 antibody to the periphery of the cylindrical brush polymer, antibody‐mediated specific binding and uptake into DEC205⁺‐positive mouse bone marrow‐derived dendritic cells (BMDC) was observed, whereas binding and uptake by DEC205^? negative BMDC and non‐DC was essentially absent. Additional conjugation of an antigen peptide yielded a multifunctional polymer structure with a much stronger antigen‐specific T‐cell stimulatory capacity of pretreated BMDC than application of antigen or polymer–antigen conjugate.     

Recognition of Dimethylarginine Analogues by Tandem Tudor Domain Protein Spindlin1

Epigenetic readout of the combinatorial posttranslational modification comprised of trimethyllysine and asymmetric dimethylarginine (H3K4me3R8me2a) takes place via biomolecular recognition of tandem Tudor-domain-containing protein Spindlin1. Through comparative thermodynamic data and molecular dynamics simulations, we sought to explore the binding scope of asymmetric dimethylarginine mimics by Spindlin1. Herein, we provide evidence that the biomolecular recognition of H3K4me2R8me2a is not significantly affected when R8me2a is replaced by dimethylarginine analogues, implying that the binding of K4me3 provides the major binding contribution. High-energy water molecules inside both aromatic cages of the ligand binding sites contribute to the reader–histone association upon displacement by histone peptide, with the K4me3 hydration site being lower in free energy due to a flip of Trp151.     

High-pressure phase transition of Bi2Fe4O9

The high-pressure behaviour of Bi2Fe4O9 was analysed by in situ powder and single-crystal x-ray diffraction and Raman spectroscopy. Pressures up to 34.3(8) GPa were generated using the diamond anvil cell technique. A reversible phase transition is observed at approximately 6.89(6) GPa and the high-pressure structure is stable up to 26.3(1) GPa. At higher pressures the onset of amorphization is observed. The crystal structures were refined from single-crystal data at ambient pressure and pressures of 4.49(2), 6.46(2), 7.26(2) and 9.4(1) GPa. The high-pressure structure is isotypic to the high-pressure structure of Bi2Ga4O9. The lower phase transition pressure of Bi2Fe4O9 with respect to that of Bi2Ga4O9 (16 GPa) confirms the previously proposed strong influence of cation substitution on the high-pressure stability and the misfit of Ga3+ and Fe3+ in tetrahedral coordination at high pressure. A fit of a second-order Birch–Murnaghan equation of state to the p–V data results in K0 = 74(3) GPa for the low-pressure phase and K0 = 79(2) GPa for the high-pressure phase. The mode Grüneisen parameters were obtained from Raman-spectroscopic measurements.     

Holomorphic Linearization of Commuting Germs of Holomorphic Maps

Let f ₁,…,f _h be h≥2 germs of biholomorphisms of ? ⁿ fixing the origin. We investigate the shape that a (formal) simultaneous linearization of the given germs can have, and we prove that if f ₁,…,f _h commute and their linear parts are almost simultaneously Jordanizable, then they are simultaneously formally linearizable. We next introduce a simultaneous Brjuno-type condition and prove that, in case the linear terms of the germs are diagonalizable, if the germs commute and our Brjuno-type condition holds, then they are holomorphically simultaneously linearizable. This answers a multi-dimensional version of a problem raised by Moser.     

Ionization-induced electron trapping in ultrarelativistic plasma wakes

The onset of trapping of electrons born inside a highly relativistic, 3D beam-driven plasma wake is investigated. Trapping occurs in the transition regions of a Li plasma confined by He gas. Li plasma electrons support the wake, and higher ionization potential He atoms are ionized as the beam is focused by Li ions and can be trapped. As the wake amplitude is increased, the onset of trapping is observed. Some electrons gain up to 7.6 GeV in a 30.5 cm plasma. The experimentally inferred trapping threshold is at a wake amplitude of 36 GV/m, in good agreement with an analytical model and PIC simulations.     

Organosilanols as catalysts in asymmetric aryl transfer reactions

[reaction: see text] Various ferrocene-based organosilanols have been synthesized in four steps starting from achiral ferrocene carboxylic acid. Applying these novel planar-chiral ferrocenes as catalysts in asymmetric phenyl transfer reactions to substituted benzaldehydes afforded products with high enantiomeric excesses. The best result (91% ee) was achieved in the addition to p-chlorobenzaldehyde with organosilanol 2b, which has a tert-butyl substituent on the oxazoline ring and an isopropyl group on the silanol fragment.     

Effect of Li2CO3 on formation temperature of hBN by modified O'Connor model

This study is interested in the effect of lithium carbonate on the formation of hexagonal boron nitride (hBN) by means of the available experimental methods including TGA, XRD, FTIR, SEM and HR‐TEM. hBN samples were synthesized at the 1450 °C with different molar ratios of lithium carbonate by modified O'Connor routine. The crystalline hBN formation tended to improve with the increment of the Li₂CO₃ concentration level (especially after more 20 %). The dopant quantity decreased the residual stresses due to the presence of possible relaxation mechanisms along with the nanocrystal structure, even favored by XRD experimental findings regarding the enhancement of crystal plane alignments, crystallite sizes and lattice parameters. As for the FTIR surveys, the Li₂CO₃ foreign impurities strengthened more and more the covalent bonds between boron and nitrogen atoms. At the same time, the samples with 40 % lithium carbonate were annealed at the varied temperatures of 1000, 1150, 1300 and 1450 °C to determine the optimum annealing temperature. The XRD+FTIR investigations indicated that the degree of hexagonality improved with the increased annealing temperature. Similarly, the surface morphology confirmed not only the formation of regularity and flaky hexagonal BN structures, but also the strengthening of covalent bonds between the atoms.