Fractal porous media II: Geometry of porous geological structures

Some geological structures are analysed and found to be fractal. An interesting feature is the very large range of scales involved; the spreading dimension is also measured for some of them. The consequences of these measurements on the analysis of transport processes in porous media are presented - the existence of fractal structures multiplies the variety of actual porous media.     

Chemical analysis and aqueous solution properties of charged amphiphilic block copolymers PBA-b-PAA synthesized by MADIX

We have linked the structural and dynamic properties in aqueous solution of amphiphilic charged diblock copolymers poly(butyl acrylate)-b-poly(acrylic acid), PBA-b-PAA, synthesized by controlled radical polymerization, with the physico-chemical characteristics of the samples. Despite product imperfections, the samples self-assemble in melt and aqueous solutions as predicted by monodisperse microphase separation theory. However, the PBA core are abnormally large; the swelling of PBA cores is not due to AA (the Flory parameter chi(PBA/PAA), determined at 0.25, means strong segregation), but to h-PBA homopolymers (content determined by liquid chromatography at the point of exclusion and adsorption transition, LC-PEAT). Beside the dominant population of micelles detected by scattering experiments, capillary electrophoresis CE analysis permitted detection of two other populations, one of h-PAA, and the other of free PBA-b-PAA chains, that have very short PBA blocks and never self-assemble. Despite the presence of these free unimers, the self-assembly in solution was found out of equilibrium: the aggregation state is history dependant and no unimer exchange between micelles occurs over months (time-evolution SANS). The high PBA/water interfacial tension, measured at 20 mN/m, prohibits unimer exchange between micelles. PBA-b-PAA solution systems are neither at thermal equilibrium nor completely frozen systems: internal fractionation of individual aggregates can occur.     

Self-assembly of charged amphiphilic diblock copolymers with insoluble blocks of decreasing hydrophobicity: from kinetically frozen colloids to macrosurfactants

We have investigated the self-assembly properties in aqueous solution of amphiphilic diblock copolymers with insoluble blocks of different hydrophobicity and demonstrated that the condition to obtain dynamic micelles is to design samples with insoluble blocks of low enough hydrophobicity. We focus here on results with new water-soluble amphiphilic diblock copolymers poly(diethyleneglycol ethylether acrylate)-b-poly(acrylic acid), or PDEGA-b-PAA. The physical characteristics of PDEGA-b-PAA micelles at high ionization have been determined by small angle neutron scattering (SANS). We show that PDEGA-b-PAA samples form micelles at thermodynamic equilibrium. The critical micelle concentrations (CMCs) decrease strongly with ionic strength and temperature due to a solvent quality decrease for, respectively, the corona and the core. This behavior of reversible aggregation is remarkable as compared to the behavior of kinetically frozen aggregation that has been widely observed with samples of similar architecture and different hydrophobic blocks, for example, poly(styrene)-b-poly(acrylic acid), PS-b-PAA, and poly(butyl acrylate)-b-poly(acrylic acid), PBA-b-PAA. We have measured the interfacial tension between water and the homopolymers PDEGA and PBA at, respectively, 3 and 20 mN/m at room temperature, which permits one to estimate the energy cost to extract a unimer from a micelle. The results are consistent with a micelle association that is fast for PDEGA-b-PAA and kinetically frozen PBA-b-PAA. Hence, PDEGA-b-PAA samples form a new system of synthetic charged macrosurfactant with unique properties of fast dynamic association, tunable charge, and water solubility even at temperatures and NaCl concentrations as high as 65 °C and 1 M.     

Synthetic aperture laser optical feedback imaging using galvanometric scanning

We describe a new one-dimensional synthetic aperture imaging laser radar (ladar) using the resonant sensitivity of a microchip laser to frequency-shifted optical feedback and galvanometric scanning of the target under investigation. In our experiment, the laser is both the source and the detector, providing optical amplification with self-aligned heterodyne detection. By using galvanometric scanning, we achieve an along-track spatial resolution better than the diffraction limit.     

Crystallization of lithium metasilicate from lithium disilicate glass

The crystallization behavior of lithium disilicate glass powder heated in molten LiNO₃ salt was investigated using X-ray diffraction techniques. Heat treatment at 500°C with LiNO₃ molten salt caused a lithium metasilicate, Li₂SiO₃, crystal phase to appear after 5–96 h. By contrast, glass powder heat-treated in air at 500°C remained amorphous after 5 h and turned into lithium disilicate, Li₂Si₂O₅, crystal after 40 h. Qualitatively similar results were obtained at 400°C. Glass powder heat-treated at 575°C in both molten salt and in air turned into lithium disilicate crystal. Metasilicate crystallization occurs with LiNO₃ molten salt at 500 and 400°C due to the incorporation of lithium into the sample glass powder from the melt during crystallization. An increase in lithium content in the sample after molten salt heat treatment was confirmed by chemical analysis using dc plasma emission spectroscopy.     

Characterization of the surface of­bulk‐molded compounds

The automotive industry more and more frequently uses composite materials such as molded compounds (sheet‐molded compounds, SMC, or bulk‐molded compounds, BMC). Bonding is then the only way of assembling two pieces. Consequently, and in order tentatively to predict the adhesive behavior of such materials, it is necessary to have a good knowledge of their surface properties. Here, different complementary techniques of surface analysis allowed us, on the one hand, to reach this aim for BMCs prepared by compression molding and, on the other hand, to show the influence on the surface properties of the concentration and composition of the internal release agent added to the blend. The surface heterogeneity and the organic nature of the surface of the compounds are shown and no phase separation occurs there as in the bulk. Mold release agents remain in the surface layer and induce some acid–base character to the surface material which depends on the type of stearate introduced in the blend. Copyright © 1999 John Wiley & Sons, Ltd.     

Diffraction effects in guided photonic band gap structure

The concept of the photonic band gap (PBG) structures stems from ideas of Yablonovitch. The idea is to design components so that they affect the properties of photons, in much the same way that ordinary semiconductor crystals affect the properties of electrons. In fact, the PBG structures forbid propagation of photons for a particular range of energy. They can be used to realise optical filters with large stop band and sharp transmission resonance. In the guided PBG structures, the existence of diffractive effects in the vertical dimension could limit the quality factor of such filters. In this paper, we have investigated the origin of diffraction losses in one-dimensional guided PGB structures using 2D and 3D numerical tools. We propose an analytical approach based on Bragg diffraction relation to explain these losses phenomenon. From this approach, the influence of some design parameters on the electromagnetic behaviour and the spectral response of PBG resonators will be explained.     

Fractal porous media I: Longitudinal stokes flow in random carpets

Two-dimensional porous media whose random cross-sections are derived from site percolation are constructed. The longitudinal flow of a Newtonian fluid in the Stokes approximation is then computed and the longitudinal permeability is obtained. Two methods are used and yield the same result when porosity is low. The Carman equation is shown to apply within ±7% when porosity is within the range from 0 to 0.75. Finally, random structures derived from stick percolation are investigated; results are qualitatively the same, but the Carman equation yields a poorer approximation.     

Heterodyne beatings between frequency-shifted feedback lasers

Frequency-shifted feedback (FSF) lasers are potential candidates for long distance telemetry due to the appearance of beatings in the noise spectrum at the output of a homodyne interferometer: the frequencies of these beatings vary linearly with the path delay. In this Letter we demonstrate that these beatings also occur in the heterodyne mixing of two identical, but distinct, FSF lasers. This phenomenon is explained by the passive cavity model and is exploited to characterize the time-spectrum properties of FSF lasers. Consequences on telemetry with FSF lasers are presented.