Mesoporous micelle templated silica with incorporated C<Subscript>8</Subscript> and C<Subscript>18</Subscript> phase

Mesoporous silica material of MCM-41 type was synthesized by co-condensation of highly concentrated octyltriethoxysilane (OTEOS), octadecyltriethoxysilane (ODTEOS) and tetraethoxysilane (TEOS). The obtained hybrid materials were characterized using XRD, TG-DSC and low temperature adsorption/desorption of nitrogen. It was shown that the applied method of synthesis allows to obtain silica of MCM-41 type with a high degree of hydrocarbon saturation.     

Influence of preparation conditions on thermal properties of lanthanide benzenepolycarboxylates

Properties of lanthanide 1,2,4-benzenetricarboxylates and lanthanide 1,2,4,5-benzenetetracarboxylates obtained by a classical synthesis method and under hydrothermal conditions were compared. Solid 1,2,4-benzenetricarboxylates and 1,2,4,5-benzenetetracarboxylates of cerium, neodymium and erbium were prepared by a classical precipitation method. The same lanthanide compounds were obtained also from hydrothermal reaction. All obtained products were examined by elemental analysis. General formulae of complexes were: Ln(1,2,4-btc)·xH₂O and Ln₄(1,2,4,5-btec)₃·yH₂O. The thermal analysis shows that hydrothermal conditions cause the coordination of less number of water molecules to complex molecule. Because lanthanide ions exhibit the most often the coordination number equal 8 or 9 one can conclude that the coordination ability of carboxylic groups under hydrothermal conditions is different from that under mild ones. Probably, in hydrothermal conditions the carboxylic groups of 1,2,4-benzenetricarboxylate ions are able to form more coordination bonds with lanthanide ions than under normal pressure.     

On the origin of satellite peaks in valence photoemission from CO ON Cu(110)

The valence-level photoelectron spectrum of CO absorbed on copper surfaces exhibits extra features in the region 10–20 eV below E_F which are attributed to multielectron excitations. We have recorded the satellite intensity as a function of photon energy in the system CO/Cu(110) using synchrotron radiation. It is found that the occurrence of all satellites, including some which are observed for the first time, can be explained in terms of the SCF Xα SW model calculations by Messmer et al.     

Detection of stress whitening in plastics with the help of X-ray dark field imaging

The processing of thermoplastics can induce a wide range of defects such as stress whitening, cavitation and porosity, which can adversely affect the reliability of the final products. Hence, fast and effective non-destructive detection methods for such defects are highly important for quality assurance on production lines. In this paper, X-ray dark field imaging is presented as a new non-destructive testing method that allows the visualization of stress whitening or cavitation efficiently. The performance of the method is demonstrated for the case of an injection-moulded polyvinylidene fluoride part that exhibits stress whitening. Whereas the stress whitening could not be detected by conventional X-ray imaging, it was localized by an X-ray dark field image acquired within a few minutes. Once the precise location of the stress whitening was known, it was possible to verify the result by local micro X-ray computed tomography and by a micro section image.     

Optical Control of Acetylcholinesterase with a Tacrine Switch

Photochromic ligands have been used to control a variety of biological functions, especially in neural systems. Recently, much effort has been invested in the photocontrol of ion channels and G‐protein coupled receptors found in the synapse. Herein, we describe the expansion of our photopharmacological approach toward the remote control of an enzyme. Building on hallmark studies dating from the late 1960s, we evaluated photochromic inhibitors of one of the most important enzymes in synaptic transmission, acetylcholinesterase (AChE). Using structure‐based design, we synthesized several azobenzene analogues of the well‐known AChE inhibitor tacrine (THA) and determined their effects on enzymatic activity. One of our compounds, AzoTHA, is a reversible photochromic blocker of AChE in vitro and ex vivo with high affinity and fast kinetics. As such, AzoTHA can be used to control synaptic transmission on the neuromuscular endplate based on the light‐dependent clearance of a neurotransmitter.     

Comparison of phantom materials for use in quality assurance of microbeam radiation therapy

Microbeam radiation therapy (MRT) is a promising radiotherapy modality that uses arrays of spatially fractionated micrometre‐sized beams of synchrotron radiation to irradiate tumours. Routine dosimetry quality assurance (QA) prior to treatment is necessary to identify any changes in beam condition from the treatment plan, and is undertaken using solid homogeneous phantoms. Solid phantoms are designed for, and routinely used in, megavoltage X‐ray beam radiation therapy. These solid phantoms are not necessarily designed to be water‐equivalent at low X‐ray energies, and therefore may not be suitable for MRT QA. This work quantitatively determines the most appropriate solid phantom to use in dosimetric MRT QA. Simulated dose profiles of various phantom materials were compared with those calculated in water under the same conditions. The phantoms under consideration were RMI457 Solid Water (Gammex‐RMI, Middleton, WI, USA), Plastic Water (CIRS, Norfolk, VA, USA), Plastic Water DT (CIRS, Norfolk, VA, USA), PAGAT (CIRS, Norfolk, VA, USA), RW3 Solid Phantom (PTW Freiburg, Freiburg, Germany), PMMA, Virtual Water (Med‐Cal, Verona, WI, USA) and Perspex. RMI457 Solid Water and Virtual Water were found to be the best approximations for water in MRT dosimetry (within ±3% deviation in peak and 6% in valley). RW3 and Plastic Water DT approximate the relative dose distribution in water (within ±3% deviation in the peak and 5% in the valley). PAGAT, PMMA, Perspex and Plastic Water are not recommended to be used as phantoms for MRT QA, due to dosimetric discrepancies greater than 5%.     

Weight distributions of geometric Goppa codes

The in general hard problem of computing weight distributions of linear codes is considered for the special class of algebraic-geometric codes, defined by Goppa in the early eighties. Known results restrict to codes from elliptic curves. We obtain results for curves of higher genus by expressing the weight distributions in terms of -series. The results include general properties of weight distributions, a method to describe and compute weight distributions, and worked out examples for curves of genus two and three.

     

Targeted LC–MS derivatization for aldehydes and carboxylic acids with a new derivatization agent 4-APEBA

Based on the template of a recently introduced derivatization reagent for aldehydes, 4-(2-(trimethylammonio)ethoxy)benzeneaminium dibromide (4-APC), a new derivatization agent was designed with additional features for the analysis and screening of biomarkers of lipid peroxidation. The new derivatization reagent, 4-(2-((4-bromophenethyl)dimethylammonio)ethoxy)benzenaminium dibromide (4-APEBA) contains a bromophenethyl group to incorporate an isotopic signature to the derivatives and to add additional fragmentation identifiers, collectively enhancing the abilities for detection and screening of unknown aldehydes. Derivatization can be achieved under mild conditions (pH 5.7, 10 °C). By changing the secondary reagent (1-ethyl-3-(3-dimethylaminopropyl) carbodiimide instead of sodium cyanoborohydride), 4-APEBA is also applicable to the selective derivatization of carboxylic acids. Synthesis of the new label, exploration of the derivatization conditions, characterization of the fragmentation of the aldehyde and carboxylic acid derivatives in MS/MS, and preliminary applications of the labeling strategy for the analysis of aldehydes in urine and plasma are described.     

Development of a microfluidic confocal fluorescence detection system for the hyphenation of nano-LC to on-line biochemical assays

One way to profile complex mixtures for receptor affinity is to couple liquid chromatography (LC) on-line to biochemical detection (BCD). A drawback of this hyphenated screening approach is the relatively high consumption of sample, receptor protein and (fluorescently labeled) tracer ligand. Here, we worked toward minimization of sample and reagent consumption, by coupling nano-LC on-line to a light-emitting diode (LED) based capillary confocal fluorescence detection system capable of on-line BCD with low-flow rates. In this fluorescence detection system, a capillary with an extended light path (bubble cell) was used as a detection cell in order to enhance sensitivity. The technology was applied to a fluorescent enhancement bioassay for the acetylcholine binding protein, a structural analog of the extracellular ligand-binding domain of neuronal nicotinic acetylcholine receptors. In the miniaturized setup, the sensitive and low void volume LED-induced confocal fluorescence detection system operated in flow injection analysis mode allowing the measurement of IC₅₀ values, which were comparable with those measured by a conventional plate reader bioassay. The current setup uses 50 nL as injection volume with a carrier flow rate of 400 nL/min. Finally, coupling of the detection system to gradient reversed-phase nano-LC allowed analysis of mixtures in order to identify the bioactive compounds present by injecting 10 nL of each mixture.