Convergence in [2+2+2] synthesis of β-phenylnaphthalene motif in polyaromatic natural products

Two optional routes to β-phenylnaphthalene structure are developed by introducing α- and β-styryl groups onto different positions in the benzocyclobutene ring followed by ring enlargement.     

Status of heavy element research using a gas-filled recoil separator at RIKEN

A gas-filled type of recoil separator for heavy element research was installed at an experimental hall of RIKEN Linear Accelerator facility to realize getting higher intensity of primary beam and long beam time. Performance of the separator was studied using target recoils and various nuclear reactions. The results show the high performance of the separator for heave element research. As an application of the GARIS, production and identification of an isotope of the 110th element ²⁷¹[110] have been performed using the ²⁰⁸Pb(⁶⁴Ni,1n)²⁷¹[110] reaction. Three decay chains coincide well both in decay times and energies with the ones reported by the group of SHIP experiment at GSI, Germany. Our results provide a confirmation of the synthesis of an isotope ²⁷¹[110] of element 110.     

Structural characterization of polypyrrole in the solid state by high resolution 15N NMR spectroscopy [II]

The solid-state ¹⁵N CP/MAS NMR spectra and ¹⁵N spin-lattice relaxation times (T₁) of doped and dedoped ¹⁵N-labeled polypyrroles prepared by electrochemical polymerization, have been measured by means of high-resolution solid-state ¹⁵N NMR. The ¹⁵N signal of polypyrrole consists of four peaks decomposed by line shape analysis. The four peaks obtained have been assigned to the various structures of polypyrrole. Further, the half-width of the ¹⁵N NMR spectra of polypyrroles is discussed as related to the electrical conductivity. © 1995 John Wiley & Sons, Inc.     

Regularity of Harmonic Functions in Cheeger-Type Sobolev Spaces

We give a geometric approach to the study of the regularity of harmonic functions in Cheeger-type Sobolev spaces, and prove the Hölder continuity of such functions. In the proof, we give a definition of an upper curvature bound of the unit sphere of a Banach space, which seems to be of independent interest.     

Products, cones, and suspensions of spaces with the measure contraction property

This article concerns several geometric properties of metricmeasure spaces satisfying the measure contraction property (MCP),which can be considered as a generalized notion of lower Riccicurvature bounds. We prove that the MCP of spaces descends totheir products and Euclidean cones. We also show that a positivelycurved space in terms of the MCP with a maximal diameter canbe represented as the spherical suspension of some topologicalmeasure space.     

Development and features of hydro-membrane gas chromatography.

Hydro-membrane gas chromatography (HMGC) is achieved by the annular condensation of water in a capillary column at less than 70 degrees C. The annular membrane of water is formed as a result of the wettability of the stationary phase, which is induced at a water contact angle ranging from 75 degrees to 79 degrees, as derived from a solubility parameter (delta) range of 15.7 +/- 0.3 MPa(1/2) of the coated resin. The range of the liquid to gas volume ratio (beta) required to support the annular membrane should be kept between 0.00005 and 0.0003. In the case of a 0.25-mm i.d. column, the ratio can be set by the combination of a 0.1 to 0.2 microl min(-1) water supply rate and helium gas flow rate. Separation by HMGC develops not only a gas-solid partition but also a focusing effect on the water membrane. One feature of HMGC is that it gives a non-adsorption chromatogram based on the blocking effect of pre-adsorbed water; furthermore, despite the presence of a relatively large quantity of water, the electron impact ionization efficiency is kept the same as in the usual GC/MS condition. The detection limit with the injection of 1 microl of aquatic solution was estimated to be less than 0.1 ppb of low-molecular-weight fatty acids with s/n = 5 on a mass chromatogram at m/z 45. The HMGC/EI-MS system can be applied to the trace analysis of C1 to C3 volatile acids, volatile inorganic acids, and halogenated organic acids in water.     

A convergent approach to the formal total synthesis of hemibrevetoxin B

A convergent synthesis of the key synthetic intermediate of hemibrevetoxin B was achieved via the intramolecular allylation of an α-chloroacetoxy ether and subsequent ring-closing metathesis.     

Exiguolide, a new macrolide from the marine sponge Geodia exigua

A new 20-membered macrolide designated exiguolide has been isolated from the marine sponge Geodia exigua, and its structure determined by interpretation of spectroscopic data. Exiguolide specifically inhibited fertilization of sea urchin (Hemicentrotus pulcherrimus) gametes but not embryogenesis of the fertilized egg.     

Effect of Ru crystal orientation on the adhesion characteristics of Cu for ultra-large scale integration interconnects

The adhesion of Cu on Ru substrates with different crystal orientations was evaluated. The crystal orientation of sputter deposited Ru could be changed from (1 0 0) to (0 0 1) by annealing at 650 °C for 20 min. The adhesion of Cu was evaluated by the degree of Cu agglomeration on Ru. Cu films on annealed Ru films with the (0 0 1) crystal orientation showed 28% lower RMS values and 50% lower Ru surface coverage than Cu as-deposited on Ru having the (1 0 0) crystal orientation after annealing at 550 °C for 30 min, which suggest that Cu wettability on the Ru(0 0 1) was better than that on the Ru(1 0 0) plane. The low lattice misfit of 4% between Cu(1 1 1) and Ru(0 0 1) may be the reason for this good adhesion property.     

A compact optical heterodyne interferometer by optical integration and its application

A compact high-resolution optical heterodyne interferometer combining a two-frequency light module and a minute optical system is described. The light module, which generates two independent frequencies of light, is fabricated by proton exchange method on LiNbO₃ substrate. We report an experiment evaluating measurement accuracy using a micro-displacement measurement system which incorporates this interferometer. Results of the experiment with a standard thickness sample show high thermal stability with maximum measurement error of 1.8 nm at a temperature from 19°C to 33°C. The system was used to measure the hysteresis of a piezoelectric element for displacements of several nm, thereby making it possible to analyze the system quantitatively in practice.