Ion-pair formation of a copper(II)-ammine complex with an anionic surfactant and the recovery of copper(II) from ammonia medium by the surfactant-gel extraction method.

The extraction and separation of copper(II), zinc(II), cobalt(II), and cadmium(II) were investigated. Both copper(II) and zinc(II) formed ammine-complexes, while cadmium(II) and cobalt(II) formed hydroxide precipitates in an ammonia medium. By the addition of sodium dodecylsulfate (SDS), a copper(II) complex formed an ion-pair (copper-ammine-DS), which was extracted into the SDS phase. However, a zinc(II) complex did not form an ion-pair, and was soluble in water. Copper(II) ion was recovered by stripping (back-extraction) after the addition of hydrochloric acid. This method was applied to the separation of copper(II) in a brass alloy.     

Different acute effects of oral and intratracheal administration of disodium arsenate and gallium arsenide on heme synthesis in rats

The acute influences of arsenic compounds on the metabolism of porphyrins and heme in various organs of rats after oral or intratracheal administration of disodium arsenate (Na₂HAsO₄) and gallium arsenide (GaAs) were examined and compared. For the oral administration experiments, 21 or 84 mg of Na₂HAsO₄, or 2 or 4 g of GaAs, per cm³ saline per kg body weight of each animal was administered to Jcl: Wistar male rats and the organs were removed after exsanguination from the vein of the right axilla under anesthesia with ether, 16 h after administration. In the case of intratracheal administration, rats given 8.2 or 16.4 mg of Na₂HAsO₄, or 0.2 or 0.4 g GaAs per cm³ saline per kg body weight were examined under the same experimental conditions as for the administration route. Increase in the body weight of rats was suppressed after intratracheal administration of the two arsenic compounds. In these rats the hematocrit value increased significantly. These changes were not shown by the orally administered rats. Elevation in δ-aminolevulinate synthase (ALA-S, EC 2.3.1.37) activity in erythroblasts by Na₂HAsO₄ was much higher after intratracheal administration than after oral administration. Suppression in the activities of δ-aminolevulinate dehydratase (ALA-D, EC 4.2.1.24) and porphobilinogen deaminase (PBG-D, EC 4.3.1.8) in peripheral erythrocytes by Na₂HAsO₄ and GaAs were stronger by intratracheal administration than by the oral route. Influences of GaAs on the activity of PBG-D in rat liver were shown to be more effective by oral administration than by the intratracheal route. Oral administration of Na₂HAsO₄ and GaAs had a stronger suppression effect on the activities of ALA-D and PBG-D in rat kidney. It seems from these results that the different extents of the influence of arsenic compounds might depend on the routes of intake.     

Short-step synthesis of tamoxifen and its derivatives via the three-component coupling reaction and migration of the double bond

The anti-tumor agent, tamoxifen, is easily synthesized by the successive allylation of benzaldehyde and the Friedel-Crafts alkylation reaction of anisole with the intermediary homoallyl silyl ethers, followed by the migration of the double bond to form the desired tetra-substituted ethylenes. Several derivatives of tamoxifen are also produced according to a similar synthetic strategy.     

Preparation and properties of isobutylene–isoprene rubber–clay nanocomposites

Isobutylene isoprene rubber (IIR)‐clay nanocomposites have been prepared successfully by melt intercalation with maleic anhydride‐grafted IIR (Ma‐g‐IIR) and organophilic clay. In IIR‐clay nanocomposites, the silicate layers of the clay were exfoliated and dispersed into the monolayer. The nanocomposites exhibited greater gas barrier properties compared with those of Ma‐g‐IIR. When 15 phr clay was added, gas barrier properties were 2.5 times greater than those of Ma‐g‐IIR. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1182–1188, 2006     

Preparation and certification of the new reference materials; plastics (disk form, JSAC 0621-0625) for determination of mercury using x-ray fluorescent analysis.

The Japan Society for Analytical Chemistry has developed some new plastic certified reference materials (CRMs) for the analysis of mercury in polyester disks using XRF analysis. These CRMs (named as JSAC 0621-0625) were prepared by casting polyesters including a toluene solution of organometallic compounds as a standard. Concentrations of the five levels of mercury ranged from 0 to 250 mg/kg. Homogeneity tests of prepared disks had shown excellent results. Interlaboratory comparison study for the certification was performed by 15 laboratory participants. The z-scores in robust statistical method was applied for the evaluation of outliers. The certified values were assigned after discarding outliers. The uncertainties of certified values were determined as the confidence levels of 95%.     

Characteristics of hyaluronate-hydroxyethyl acrylate blend gel and release of cationic amphiphilic solutes

Hyaluronate-hydroxyethyl acrylate blend gel (HA-PHEA) were prepared to modify the brittleness of hyaluronate gel (HA) and the characteristics of HA-PHEA gel were compared with those of HA and polyhydroxyethyl acrylate (PHEA) gels. These gels were high in water content and transparent. HA-PHEA gel was improved in viscoelastic properties due to the elasticity and the high affinity with water of PHEA, and the drying-swelling cycles became reversible. The effective charge densities theta of the gels estimated from membrane potentials were -0.002, -0.008 and 0 mol dm(-3) for HA-PHEA, HA and PHEA gels. Effects of electro- static and nonelectrostatic interactions on absorptions and releases were studied using sodium benzoate (NaBA) as an anionic solute, and methylene blue (MB), chlorpromazine (CPHCl) and benzethonium chloride (BZTCl) as cationic solutes, in which CPHCl and BZTCl are cationic amphiphilic solutes. The releases of MB, CPHCl and BZTCl from HA-PHEA and HA gels were suppressed comparing with those of NaBA. By adding salts, the releases of MB and CPHCl were enhanced but those of BZTCl were suppressed due to enhancement of the intra- and intermicelle formation. In the releases of the cationic solutes from HA-PHEA gel, electrostatic and nonelectrostatic interactions with HA were found to play important roles. Behaviors of the releases from HA-PHEA gel were found to possess the features of HA gel.     

Factors affecting polyhydroxybutyrate biosynthesis in the marine photosynthetic bacteriumRhodopseudomonas sp. strain W-1S

Applied Biochemistry and Biotechnology - A marine photosynthetic bacterium,Rhodopseudomonas sp. strain W-1S, accumulated polyhydroxybutyrate (PHB) to 56% of the dry cell weight under microaerobic...     

Liquid-liquid extraction of copper (I) and copper (II) as ion-paired complexes with acyclic 2-thienyl-containing polythioether and triphenylmethane dye anion

Three acyclic polythioethers containing 2-thienyl units at both ends were synthesized and the effect of substituent on the extraction of copper(II) was studied. The methyl groups in the terminal thiophene ring have imparted an appreciable degree of increase in the percent extraction of copper(II), while the introduction of chlorine atoms into the 2-thienyl unit resulted in the reverse effect. Among the counter dye anions examined, tetrabromophenolphthalein ethylester was the best one for copper(II) extraction. The composition of extracted species was evaluated to be 122 (Cu(II)/polythioether/dye anion). Quantitative extraction of copper(I) was attained as complexes with various triphenylmethane dyes, i.e., bromocresol green, bromothymol blue, bromo-phenol blue and pyrogallol red. Copper(I) in organic phase was completely back-extracted with 2 mole/l sulfuric acid containing 10% hydrogen peroxide.     

Water-swellable polyelectrolyte microgels polymerized in an inverse microemulsion using a nonionic surfactant

A series of poly(dimethylacrylamide-co-2-acrylamido-2-methyl-1-propanesulfonic acid) microgels slightly crosslinked by methylene-bis-acrylamide (MBA) were polymerized in a novel inverse microemulsion polymerization (IMEP) system. To determine a suitable composition of the IMEP system, the phase diagram of a pseudoternary system was made. The pseudoternary polymerization system consisted of n-hexane, a nonionic surfactant (polyoxyethylene oleyl ether, C18En), and an aqueous monomer solution. Polymerization was performed in a single-phase reversed micelle solution. The reversed micelles were about 50 nm in diameter, as determined by FF-TEM. The viscometric characteristics of the polymers extracted from the IMEP system were studied in 3 mM sodium chloride aqueous solution. The intrinsic viscosity values for the noncrosslinked and crosslinked (0.1 mol% MBA was incorporated) samples were 25 and 7.4 dl/g, respectively. The overlap concentration (c*) of crosslinked polymer microgel occurred at c[eta] = 1 in the solvent. When the volume fraction (phi) of the microgel was 0.7, the value of the apparent yield stress of the microgel solution was observed. These results show that the microgel has a significant thickening effect above c* due to friction between the microgel particles. It is assumed that the microgels polymerized in a confined space retain the shape or size of the nanosized reactor with a diameter on the order of 50 nm.     

Surface structures of adsorption layers of sodium hyaluronate and bovine serum albumin complexes on poly(γ-methyl-l-glutamate) film and their surface properties

Two-dimensional structures and characteristics of the complexes between sodium hyaluronate (NaHA) and bovine serum albumin (BSA) were studied by using a quartz crystal microbalance method and an atomic force microscope (AFM). NaHA did not adsorb on poly(-methyl-l-glutamate) (PMLG) film. On the other hand, the complexes adsorbed on it and the adsorption behaviors were found to be Langmuir types. With increasing weight ratio of BSA to NaHA, W _BSA, the adsorption constants K decreased and the saturated adsorption masses increased. The adsorbed complexes were spherical particles and at saturated adsorption states they covered compactly on the PMLG film. The mean diameters d _AFM estimated from the topographic images decreased from 70 to 54 nm with increasing W _BSA. The adhesion force F _ad and the frictional force F _f between the complex layers and the AFM tip were obtained by using the contact mode of the AFM. With increasing W _BSA, the values of F _ad decreased and the values of F _f increased. Compared with the frictional coefficient of the NaHA adsorption layer on the BSA monolayer, the values for the NaHA–BSA complex layer were found to be much higher.