Strain relaxation in the epitaxy of La2/3Sr1/3MnO3 grown by pulsed-laser deposition on SrTiO3(001)

With a Curie point at 370?K, the half-metal (La_0.7Sr_0.3)MnO₃ (LSMO) is one of the most interesting candidates for electronic devices based on tunnel magnetoresistance. SrTiO₃ (STO) is up to now the best substrate for the epitaxy of suitable thin films of LSMO. The pseudocubic unit cell of rhombohedral LSMO has a parameter a _LSMO such that (a _STO ? a _LSMO)/a _LSMO = +?0.83% (where a _STO is the parameter of cubic STO) and an angle of 90.26°. As strained growth is tetragonal, relaxation implies recovery of both the pseudocubic parameter and of the original angle. In the LSMO layers that we prepare by pulsed-laser deposition, we show that these two processes are quite independent. The angular distortion is partially recovered by twinning in films 25?nm thick, while recovery of the parameter never occurs in the thickness range that we explored (up to 432?nm). A relaxation, however, takes place above a thickness of 100?nm, associated with a transition from two-dimensional to three-dimensional columnar growth. It is accompanied by chemical fluctuations. Our magnetic measurements exhibit Curie temperatures and magnetic moments very close to the bulk values in those layers where the crystal parameter is strained but the angle partially relaxed.     

Engyodontochones,Antibiotic Polyketides from the Marine Fungus Engyodontium album Strain LF069

Six new ( 2 , 4 – 8 ) and two known polyketides with a basic structure of an anthraquinone‐xanthone were isolated from mycelia and culture broth of the fungus Engyodontium album strain LF069. The structures and relative configurations of these compounds were established by spectroscopic means, and their absolute configurations were defined mainly by comparison of quantum chemical TDDFT calculated and experimental ECD spectra. Compounds 2 and 4 – 8 were given the trivial names engyodontochone A ( 2 ) and B–F ( 4 – 8 ). Compounds 5 – 8 represent the first example of a 23,28 seco‐beticolin carbon skeleton. The relative and absolute configurations of two known substances JBIR‐97/98 ( 1 ) and JBIR‐99 ( 3 ) were determined for the first time. All isolated compounds were subjected to bioactivity assays. Compounds 1 – 4 exhibited inhibitory activity against methicillin‐resistant Staphylococcus aureus (MRSA) that was 10‐fold stronger than chloramphenicol.     

Surface composition of PdCuAu ternary alloys: a combined LEIS and XPS study

PdCuAu ternary alloy samples with different composition were synthesized on top of ZrO₂‐modified porous stainless steel disks by the sequential electroless deposition technique. The structure, morphology and bulk composition of the samples were characterized by X‐ray diffraction (XRD), scanning electron microscopy and energy dispersive X‐ray spectroscopy (EDX). Complete alloy formation with a pure fcc phase for the Pd₇₁Cu₂₆Au₃, Pd₇₀Cu₂₅Au₅ and Pd₆₇Cu₂₄Au₉ samples and a bcc structure for the Pd₆₂Cu₃₆Au₂ and Pd₆₀Cu₃₇Au₃ samples were obtained upon annealing at 500 °C for 120 h as revealed by XRD. A combination of low‐energy ion scattering (LEIS) and X‐ray photoelectron spectroscopy (XPS) was used to investigate the surface properties of the PdCuAu alloys. XPS results confirmed alloy formation under the annealing conditions. XPS analysis also revealed that the near‐surface regions of the alloys became enriched in Pd with respect to the bulk composition determined by EDX. In contrast, LEIS and angle‐resolved XPS analyses showed that the top‐most surface layers in all samples were copper‐rich compared with the bulk composition. This high Cu surface concentration could impart resistance to bulk sulfide formation to the PdCuAu alloy membranes. Copyright © 2015 John Wiley & Sons, Ltd.     

Estimation of Landfill Gas Generation Rate and Gas Permeability Field of Refuse Using Inverse Modeling

Landfill methane must be captured to reduce emissions of greenhouse gases; moreover it can be used as an alternative energy source. However, despite the widespread use of landfill gas (LFG) collection systems for over three decades, little information about their capture efficiency is available, because LFG generation rates usually remain unknown. Therefore, to assess the efficiency of greenhouse gas capture and to estimate the amount of fugitive emissions, LFG generation rates should be properly determined. In addition, to improve the capture efficiency of methane while minimizing air intrusion from the atmosphere, it is important to quantify gas flow patterns within landfills. In this study, a methodology to quantify methane generation rates and to estimate the gas permeability field was examined using inverse modeling. To account for the heterogeneous, but spatially correlated structure of refuse, the pilot point method involving geostatistical techniques and optimization algorithms was used. Synthetic observation data were generated from forward simulations for a pumping test and a baro-pneumatic test, and these data were used to test the inversion procedure. The inverse model was able to reproduce the spatial permeability distribution using the transient pressure changes in response to the withdrawal of LFG during the pumping test. The LFG generation rate was also successfully estimated using the data from the baro-pneumatic test with errors less than 2%. While this methodology was developed and successfully tested using synthetic data, it will be investigated in the future using field data from the bioreactor test cells at the Yolo County Central Landfill, CA.     

Microstructure of high-temperature plastically deformed Zn-doped CdTe; comparison with In-doped GaAs

We investigated the microstructure of CdTe and Cd_0.96Zn_0.04Te samples plastically deformed by uniaxial compression at constant strain rate between 0.6T_m and 0.85T_m (where T_m is the melting temperature, 1365 K). We used scanning electron microscopy (SEM) in the cathodoluminescence (CL) mode to observe dislocation arrangements and transmission electron microscopy (TEM) to measure dislocation dissociation widths. These results are compared to those reported for In doped GaAs, as well as results concerning high temperature plastic deformation of both types of materials. In both cases, isoelectronic doping strongly increases yield stresses and hardening rates. A cell structure appears for larger stresses and strains. The increase of dissociation width in Ga_0.99In_0.01As with respect to GaAs was not observed in Cd_0.96Zn_0.04Te compared to CdTe. On the basis of macroscopic and microscopic studies, a better understanding of the hindering by doping of dislocation multiplication during crystal growth is possible. The involved mechanisms can reduce the as-grown dislocation density in CdTe and GaAs.     

New Organorhodium and -Iridium Compounds of Iminophosphoranylmethanes

Abstract

The synthesis and structure of new metallacyclic compounds of Rh(I) and Ir(I) containing bidentate mono- and bis(iminophosphoranyl)methane or -methanide ligands and their reactions with CO, phosphine and HCl are described.     

Enhancing aperiodic stochastic resonance through noise modulation

We show that the conventional stochastic resonance (SR) effect for aperiodic signals in a model neuron can be enhanced by modulating the intensity of the input noise (which could be introduced artificially in bioengineering applications) with either the input signal or the unit's output rate signal. We analyze SR enhancement theoretically and numerically. We discuss how this work provides the theoretical foundation for the development of an optimal noise-based technique for enhancing sensory function. (c) 1998 American Institute of Physics.     

Effect of field cooling on magnetic properties of ultrafine CoO/Co particles

In CoO-Ag granular films with small CoO contents, we have observed ultrafine Co particles inside or on the surface of the CoO particles. After field cooling under the external magnetic field of 50 kOe, a sustained magnetization (or vertical) shift and exchange field shift were observed. The magnetization shift and the exchange field shift increased as the cooling field is increased and temperature decreased, in correlation to each other. PACS 75.30.Et; 75.30.Gw; 75.75.+a