Thermally reversible light scattering films based on the melting/crystallization of organic crystals dispersed in an epoxy matrix

Films that can be reversibly switched from opaque to transparent states by varying temperature (TRLS films), have potential applications in thermal sensors, optical devices, recording media, etc. A dispersion of organic crystals in a thermoset may be used for these purposes provided that at temperatures higher than the melting point there is a matching of refractive indices of both phases. A model system consisting on a dispersion of diphenyl (DP) crystals in an epoxy matrix based on diglycidyl ether of bisphenol A and m-xylylenediamine, was analyzed as a possible TRLS film encapsulated between transparent covers to avoid sublimation of DP. To obtain a uniform dispersion of DP-rich domains in the epoxy matrix by polymerization-induced phase separation, it was necessary to add 5 wt% of polystyrene (PS) to the initial formulation. Phase separation induced by polymerization at 80 °C led to a dispersion of PS/DP domains in the epoxy matrix due to the low compatibility of PS with the epoxy and its high compatibility with DP. Crystallization and melting processes were confined to the interior of dispersed domains leading to an excellent reproducibility of the optical properties of TRLS films in the course of successive heating-cooling cycles.     

Cure kinetics of a cobalt catalysed dicyanate ester monomer in air and argon atmospheres from DSC data

A kinetic analysis of the cyclotrimerisation reaction of a dicyanate ester monomer catalysed by cobalt(II) acetylacetonate and nonylphenol in air and argon atmospheres has been carried out by differential scanning calorimetry (DSC). Dynamic and isothermal DSC scans as well as the glass transition temperature are the experimental data obtained. From isothermal scans a higher cyanate conversion in air than in argon was obtained. The cyanate conversions are satisfactorily described with a second-order kinetic equation in the kinetically controlled region, and by m-order (m<1) equation after vitrification is reached. Activation energies determined by different procedures agree among them, showing slightly higher values in argon than in air.     

Polyelectrolyte capsules made of two biocompatible natural polymers

In this study the influence of the experimental conditions on the obtention of polyelectrolyte multilayer capsules was investigated. Two ways of the simple coacervation method was used to obtain spherical capsules involving chitosan and hyaluronan, chitosan being inside the particle covered by a hyaluronan layer to increase the biocompatibility. The ¹H-NMR spectroscopy confirmed a polyelectrolyte complex formation and the optical microscopy shows that the complexed capsules have good sphericity with average diameters ranging from 590 at 1550 μm in the experimental conditions adopted. One can observe that in the acid medium the complexed capsules are much stable than the chitosan beads. The structures described provide a starting point for the design and fabrication of complexed capsules made of two biocompatible natural polymers with potential applicability in medical or pharmaceutical applications. Few diffusion experiments demonstrated that the complexed layer controls the diffusion of dextran included in the chitosan inner domain.     

Interdisciplinary study on pottery experimentally impregnated with wine

Experimentally developed ceramic pots, with two different sizes of grain, were half-filled with wine and subjected to thermal alteration at constant elevated temperature ((60 ± 2)°C) in darkness for 12 weeks. This work sought to characterise the samples thereby obtained from chemical and mineralogical perspectives using scanning electron microscopy and an energy-dispersive X-ray microanalysis system (SEM-EDX), Fourier transform infrared spectroscopy (FTIR) and capillary electrophoresis (CE) with UV detection as an alternative to chromatographic methods, due to its good resolution, automation, simplicity, high speed, low consumption of chemicals and short time required for sample preparation. The capillary electrophoresis method was used for the detection of five wine biomarkers: succinic acid, malic acid, tartaric acid, citric acid and lactic acid. In general, it was noted that the fine-grained ceramic assortment retained the organic material better than the coarser-grained ceramics. An interesting observation derived from this study was that not only could tartaric acid be considered as a biomarker for wine residues in archaeological pottery, but malic acid could also act similarly for white wine and lactic acid for red wine.     

Reliability and performances of a high-purity gamma spectrometry system used for environmental measurements

Proficiency testing is among the most methods to assess the accuracy of the analytical data produced by laboratories. The results presented in this paper show the performance of the laboratory for three intercomparisons organized by Radionuclide Metrology Laboratory (RML) and by IAEA, in which SALMROM laboratory have participated in three consecutive years. The feedbacks from the final reports from RML and IAEA demonstrate the performance of the laboratory where 34 out of 39 pass all acceptance criteria of the test. The rest of five results which failed served to improve the laboratory analysis and to optimize accuracy measurements. The overall results of the proficiency tests point out the reliability and traceability of the gamma spectrometry system used for environmental measurements.     

Searching for Potential Markers of Glomerulopathy in Urine by HS-SPME-GC×GC TOFMS

Volatile organic compounds (VOCs) exiting in urine are potential biomarkers of chronic kidney diseases. Headspace solid phase microextraction (HS-SPME) was applied for extraction VOCs over the urine samples. Volatile metabolites were separated and identified by means of two-dimensional gas chromatography and time of flight mass spectrometry (GC × GC TOF MS). Patients with glomerular diseases (n = 27) and healthy controls (n = 20) were recruited in the study. Different VOCs profiles were obtained from patients and control. Developed methodology offers the opportunity to examine the metabolic profile associated with glomerulopathy. Four compounds found in elevated amounts in the patients group, i.e., methyl hexadecanoate; 9-hexadecen-1-ol; 6,10-dimethyl-5,9-undecadien-2-one and 2-pentanone were proposed as markers of glomerular diseases.     

How well does molecular simulation reproduce environment-specific conformations of the intrinsically disordered peptides PLP,TP2 and ONEG?

Understanding the conformational ensembles of intrinsically disordered proteins and peptides (IDPs) in their various biological environments is essential for understanding their mechanisms and functional roles in the proteome, leading to a greater knowledge of, and potential treatments for, a broad range of diseases. To determine whether molecular simulation is able to generate accurate conformational ensembles of IDPs, we explore the structural landscape of the PLP peptide (an intrinsically disordered region of the proteolipid membrane protein) in aqueous and membrane-mimicking solvents, using replica exchange with solute scaling (REST2), and examine the ability of four force fields (ff14SB, ff14IDPSFF, CHARMM36 and CHARMM36m) to reproduce literature circular dichroism (CD) data. Results from variable temperature (VT) ¹H and Rotating frame Overhauser Effect SpectroscopY (ROESY) nuclear magnetic resonance (NMR) experiments are also presented and are consistent with the structural observations obtained from the simulations and CD. We also apply the optimum simulation protocol to TP2 and ONEG (a cell-penetrating peptide (CPP) and a negative control peptide, respectively) to gain insight into the structural differences that may account for the observed difference in their membrane-penetrating abilities. Of the tested force fields, we find that CHARMM36 and CHARMM36m are best suited to the study of IDPs, and accurately predict a disordered to helical conformational transition of the PLP peptide accompanying the change from aqueous to membrane-mimicking solvents. We also identify an α-helical structure of TP2 in the membrane-mimicking solvents and provide a discussion of the mechanistic implications of this observation with reference to the previous literature on the peptide. From these results, we recommend the use of CHARMM36m with the REST2 protocol for the study of environment-specific IDP conformations. We believe that the simulation protocol will allow the study of a broad range of IDPs that undergo conformational transitions in different biological environments.

A protocol for simulating intrinsically disordered peptides in aqueous and hydrophobic solvents is proposed. Results from four force fields are compared with experiment. CHARMM36m performs the best for the simulated IDPs in all environments.