Simple and rapid determination of trace amounts of gold(III), palladium(II), and platinum(IV) in industrial waste solutions after recovery of noble metals by combined use of GFAAS and anion-exchange separation.

A simple and rapid method for the analysis of trace amounts of gold(III), palladium(II), and platinum(IV) by the combined use of graphite furnace atomic absorption spectrometry and anion-exchange separation was proposed, and successfully applied to the rapid determination of metals in industrial waste solutions obtained from the final process of noble-metal recovery factories, because noble metals can be selectively and quantitatively separated to a high degree by using a small column containing only a 0.7 g-portion of a common anion-exchange resin and a dilute thiourea solution.     

High pressure and high temperature investigations in the system MgOSiO2H2O

The system MgOSiO₂H₂O was investigated at pressures between 40 and 95 kbar and at temperatures between 500 and 1400°C. The reaction products were examined by X-ray, optical and thermal analysis techniques and the density of phase A discovered by Ringwood and Major was also measured. It was found that phase A was hydrated and its chemical formula was H₆Mg₇Si₂O₁₄. When the $\text{Mg}\text{Si}$ ratio of the system is 2, phase A + clinoenstatite, and forsterite are stable at temperatures lower and higher than a boundary curve T (°C) = 10P (kbar), respectively. When the $\text{Mg}\text{Si}$ ratio of the system is 3, phase A + phase D (which is completely different from the phases, A, B and C discovered by Ringwood and Major, and any other known phases of magnesium silicate) and phase D + brucite are stable at temperatures lower and higher than a boundary curve T(°C) = 10P (kbar) + 200. Phase A has approximately an hexagonal symmetry and the space group and the lattice parameters are determined as P6₃ or $\text{P6}{}_3\text{m}$ and a = 7.866(2) Å and c = 9.600(3) Å, respectively. The measured density is 2.96 ± 0.02 g/cm³. The optical observations show that phase A is biaxial positive crystal with refractive indices α = 1.638 ± 0.001, β = 1.640 ± 0.002, and γ = 1.649 ± 0.001. Some interpretation is given on the inconsistency between the symmetry determined by the X-ray diffraction and the optical observation. The new phase D belongs to the space group $\text{P2}{}_1\text{c}$ with lattice parameters a = 7.914(2)Å, b = 4.752(1) Å, c = 10.350(2) Å and β = 108.71(5)° and is a biaxial crystal with refractive indices α = 1.630 ± 0.002, β = 1.642 ± 0.002 and γ = 1.658 ± 0.001.     

Non-glutamate type pyrrolo[2,3-d]pyrimidine antifolates. III. Synthesis and biological properties of N(omega)-masked ornithine analogs

The glutamic acid moiety of N-[4-[3-(2,4-diamino-7H-pyrrolo[2,3-d]pyrimidin-5-yl)propyl]benzoyl]-L-g lutamic acid (1b, TNP-351) and the related compound (1a), was replaced with various N(omega)-acyl-, sulfonyl-, carbamoyl- and aryl-2,omega-diaminoalkanoic acids, and the inhibitory effects of the resulting products (9, 11, 14, 18, 21, 23, 25, 30, 36) on dihydrofolate reductase (DHFR), the growth of murine fibrosarcoma Meth A cells, and methotrexate-resistant human CCRF-CEM cells, were examined. Compounds (9a-f) acylated with a hemiphthaloyl group were efficiently synthesized by coupling pyrrolo[2,3-d]pyrimidine carboxylic acids (7a,b) and N(omega)-phthaloyl 2,omega-diaminoalkanoic acid methyl esters (6a-c) and subsequent hydrolysis. The other N(omega)-acyl- and sulfonyl-ornithine analogs (21, 23, 25) were synthesized by acylation of free amino intermediates (19a,b) derived from tert-butoxycarbonyl-ornithine analogs (17a,b). A free ornithine analog (18) did not strongly inhibit Meth A cell growth, whereas all N(omega)-acyl-, sulfonyl-, carbamoyl- and aryl-ornithine analogs (9, 11, 21, 23, 25, 30, 36) exhibited much more potent inhibitory activities against both DHFR and Meth A cell growth. In particular, compounds 9c, 21k and 36a also showed remarkable growth-inhibitory activities against methotrexate-resistant CCRF-CEM cells. These results demonstrate that the potent inhibitory activities of N(omega)-masked ornithine analogs against the growth of Meth A cells and methotrexate-resistant CCRF-CEM cells, results from effective uptake via reduced folate carrier and their potent DHFR inhibition.     

Efficient and widely applicable method of constructing neo-proteoglycan utilizing copper(I) catalyzed 1,3-dipolar cycloaddition

Efficient constructions of two types of neo-proteoglycan are described. Enzymatically prepared alkyne containing chondroitin 6-sulfate chains and chemically synthesized azido group having compounds are linked by utilizing the copper(I) catalyzed 1,3-dipolar cycloaddition.     

Dynamic stability of carbonyl ylides

The non- and fluorine-substituted singlet carbonyl ylides are studied by using ab initio MCSCF calculations. The thermodynamic stability of the carbonyl ylides and the intramolecular stability to isomerization or fragmentation reaction coordinates is demonstrated in terms of the topological structure of the ab initio potential energy surfaces. The allylic resonance is found to be dynamically unstable, considering out-of-plane vibrational mode. The instability is studied by the symmetries of the low-lying excitations out of the MCSCF wave function.     

Synthesis of inorganic-organic hybrids by incorporation of inorganic components into organic polymer using metal alkoxides

Inorganic-organic hybrids have been synthesized by incorporation of the inorganic component of Ti(OC₂H₅)₄ into the organic polymer of ethyl cellulose. The inorganic-organic hybrids did not dissolve in toluene used as a solvent for the starting materials. The ethanol was formed as a by-product of the alcoholysis condensation reaction between Ti(OC₂H₅)₄ and ethyl cellulose. These results suggest that ethoxy groups of Ti(OC₂H₅)₄ react with hydroxy groups of ethyl cellulose to form cross-linking bonds of –O–Ti–O–. The reaction of Ti(OC₂H₅)₄ with ethyl cellulose was further investigated by Fourier transform infrared (FT-IR) spectroscopy. The FT-IR spectroscopic experiments revealed that the Ti–O bond state of Ti(OC₂H₅)₄ was changed by refluxing a toluene solution of Ti(OC₂H₅)₄ with ethyl cellulose. The inorganic-organic hybrids have an interesting dielectric property; their dielectric constant is higher than that of ethyl cellulose and that of a simple mixture of TiO₂ and ethyl cellulose.     

Direct measurements of HOx radicals in the marine boundary layer: testing the current tropospheric chemistry mechanism

OH and HO(2) radicals, atmospheric detergents, and the reservoir thereof, play central roles in tropospheric chemistry. In spite of their importance, we had no choice but to trust their concentrations predicted by modeling studies based on known chemical processes. However, recent direct measurements of these radicals have enabled us to test and revise our knowledge of the processes by comparing the predicted and observed values of the radical concentrations. We developed a laser-induced fluorescence (LIF) instrument and successfully observed OH and HO(2) at three remote islands of Japan (Oki Island, Okinawa Island, and Rishiri Island). At Okinawa Island, the observed daytime level of HO(2) agreed closely with the model estimates, suggesting that the photochemistry at Okinawa is well described by the current chemistry mechanism. At Rishiri Island, in contrast, the observed daytime level of HO(2) was consistently much lower than the calculated values. We proposed that iodine chemistry, usually not incorporated into the mechanism, is at least partly responsible for the discrepancy in the results. At night, HO(2) was detected at levels greater than 1 pptv at all three islands, suggesting the presence of processes in the dark that produce radicals. We showed that ozone reactions with unsaturated hydrocarbons, including monoterpenes, could significantly contribute to radical production.