Parallel synthesis of tandem Ugi/Diels-Alder reaction products on a soluble polymer support directed toward split-pool realization of a small molecule library

A series of parallel reactions were carried out for the tandem Ugi/Diels-Alder reaction on our MPEG-O-CH₂- platform. Ninety-six out of a 100 entries were successful to give complex heterotricycles. The stereoselectivity was found not to be influenced by the building blocks used for amine and carboxylic acid components. An unexpected side pathway was found but was suppressed by employing appropriate reaction conditions. The reaction was also performed on solid phase, by which a larger library is potentially realized by employing the split-pool method.     

Amidase and peptidase activities of polyclonal immunoglobulin G present in the sera of patients with rheumatoid arthritis

Polyclonal Immunoglobulin (Ig) G from patients with rheumatoid arthritis (RA) and healthy subjects hydrolyzed carbobenzoxy−Val−Gly−Arg p-nitroanilide and D−Pro−Phe−Arg p-nitroanilide. RA IgG exhibited higher activity against the former substrate, but not the latter. On the other hand, RA IgG showed reduced activity against D−Pro−Phe−Arg methylcoumarinamide, when compared with those of the healthy controls. These results suggest that RA IgGs differ from normal IgGs in the substrate specificity of amidase activity. Preliminary studies have shown that two out of three RA IgG samples cleaved a pentapeptide—Gln−Arg−Arg−Arg−Ala−Ala— which is assumed to be associated with the risk of developing RA (Gregersen, P. K. et al. (1987), Arthritis Rheum. 30, 1205–1213). By contrast, virtually no cleavage of the same peptide was observed with IgG from healthy controls. A peptide analog, Gln−Arg−Arg−Trp−Ala, was not cleaved at all by any IgGs examined either from RA patients or healthy controls.     

Carrier generation process on photoconductive polymer films as studied by magnetic field effects on the charge-transfer fluorescence and photocurrent

We have studied the magnetic field effects (MFEs) on the charge-transfer fluorescence and transient photocurrent of a 1,2,4,5-tetracyanobenzene-doped poly(N-vinylcarbazole) film, which reflect the recombination and escape yields of the carriers, respectively. The recombination yield dependence of the external magnetic field (B) clearly shows two types of the MFEs, growth with increasing B due to the hyperfine mechanism (HFM) and a negative dip due to the level-crossing mechanism (LCM). On the other hand, the escape yield indicates complementary MFEs with a sharp decrease in yield with increasing B and then a positive dip. Simultaneous observation of the HFM- and LCM-MFEs proves the stepwise hole-hopping mechanism rather the long-range hole-jumping one. The quantitative analysis of the recombination and escape MFEs is performed using the stochastic Liouville equations (SLE) for a one-dimensional lattice model in which the stepwise hole hops take place between the nearest neighbor carbazole units with spin conservation. The SLE analysis provides the recombination and hole transfer rate constants of 7.0 x 10(7) and 4.5 x 10(8) s(-1), respectively. The boundary site number for the ion pairs in the one-dimensional model is estimated by the best fit to the experimental results. The interionic distance of the boundary ion pair in the one-dimensional model including eight sites agrees with the thermalization distance in the Onsager model. Hence, it is concluded that the elementary processes in the Onsager model applied to molecular amorphous solids are the stepwise hole hops rather than a long-range hole jump.     

Simultaneous accumulation of both skeletal and appendage-based diversities on tandem Ugi/Diels-Alder products

Diversity-oriented organic synthesis (DOS) is a key concept for construction of skeletally diverse small molecule libraries to discover drug-like small molecules. Here, we describe a DOS class to transform a complex 7-oxanorbornene skeleton, which is readily accessible by a tandem Ugi/Diels-Alder reaction, into two heterotricycle skeletons selectively by using tandem ROM/CM/RCM reaction. In the present study, the mode of cyclization is pre-encoded by building blocks used in the complexity-generating tandem Ugi/Diels-Alder reaction. Since variable alkenes can be used in the CM reaction, our approach can be extended to construct both skeleton- and appendage-diverse small molecule libraries.     

Improvement of basic performances of a nickel-metal hydride battery

To develop a sealed-type nickel-metal hydride battery for use in portable equipment or in electric vehicles, investigations were conducted on negative electrodes using AB₅-type hydrogen storage alloy and positive electrodes. For the cycle life performance of the battery, alkaline treatment of the alloy and the substitution of more than 50% to the alloy with Co were effective. For the positive electrode, zinc as a solid solution in the nickel positive electrode obviously prevented γ-NiOOH from being formed in the charging process of β-Ni(OH)₂ and suppressed the migration of the electrolyte solution in the separator to the active material of the positive electrode. Also, hydrophobic treatment of the surface of the alloy was effective to prevent the elevation of the battery internal pressure of the battery in high rate charge.     

Long-range jump versus stepwise hops: magnetic field effects on the charge-transfer fluorescence from photoconductive polymer films

Magnetic field effects on the charge-transfer (CT) fluorescence of a 1,2,4,5-tetracyanobenzene-doped poly(N-vinylcarbazole) thin film were investigated to clarify the primary process in photoconductive organic amorphous solid. The CT fluorescence increased with increasing magnetic field until 10 mT, and then it showed the dip around 40-50 mT. The hyperfine coupling mechanism observed in the low field and the level-crossing mechanism observed around 46 mT clearly indicate that the spin-conservative stepwise hole hops take place in the films. The boundary distance determined from the simulation based on the stepwise hopping model almost agreed with the interionic separation estimated within the Onsager analysis.     

Synthesis and domino metathesis of functionalized 7-oxanorbornene analogs toward cis-fused heterocycles

Here, we report our strategy to synthesize structurally diverse cis-fused heterocycles via 7-oxanorbornene analogs. By the intramolecular Diels-Alder reaction of 3-iodoacrylamide, followed by the domino metathesis reaction, the cis-fused heterobicyclic skeleton was efficiently constructed in 5-8 steps.     

Medicinal Flowers. XXXI. Acylated oleanane-type triterpene saponins, Sasanquasaponins I-V, with antiallergic activity from the flower buds of Camellia sasanqua

The methanolic extract and its 1-butanol-soluble fraction from the flower buds of Camellia sasanqua THUNB. were found to show inhibitory activities on the release of β-hexosaminidase from rat basophile leukemia (RBL-2H3) cells. From the 1-butanol-soluble fraction, five new acylated oleanane-type triterpene saponins, sasanquasaponins I-V, were isolated together with a known saponin and their chemical structures were elucidated on the basis of chemical and physicochemical evidence. The principal saponin constituents, sasanquasaponins I-III, with an acyl group at the 22-position of the aglycon part showed the inhibitory effects on the release of β-hexosaminidase and some structure-activity relationships were reported.     

Detection of interfacial phenomena with osteoblast-like cell adhesion on hydroxyapatite and oxidized polystyrene by the quartz crystal microbalance with dissipation

The adhesion process of osteoblast-like cells on hydroxyapatite (HAp) and oxidized polystyrene (PSox) was investigated using a quartz crystal microbalance with dissipation (QCM-D), confocal laser scanning microscope (CLSM), and atomic force microscope (AFM) techniques in order to clarify the interfacial phenomena between the surfaces and cells. The interfacial viscoelastic properties (shear viscosity (η(ad)), elastic shear modulus (μ(ad)), and tan δ) of the preadsorbed protein layer and the interface layer between the surfaces and cells were estimated using a Voigt-based viscoelastic model from the measured frequency (Δf) and dissipation shift (ΔD) curves. In the ΔD-Δf plots, the cell adhesion process on HAp was classified as (1) a mass increase only, (2) increases in both mass and ΔD, and (3) slight decreases in mass and ΔD. On PSox, only ΔD increases were observed, indicating that the adhesion behavior depended on the surface properties. The interfacial μ(ad) value between the material surfaces and cells increased with the number of adherent cells, whereas η(ad) and tanδ decreased slightly, irrespective of the surface. Thus, the interfacial layer changed the elasticity to viscosity with an increase in the number. The tan δ values on HAp were higher than those on PSox and exceeded 1.0. Furthermore, the pseudopod-like structures of the cells on HAp had periodic stripe patterns stained with a type I collagen antibody, whereas those on PSox had cell-membrane-like structures unstained with type I collagen. These results indicate that the interfacial layers on PSox and HAp exhibit elasticity and viscosity, respectively, indicating that the rearrangements of the extracellular matrix and cytoskeleton changes cause different cell-surface interactions. Therefore, the different cell adhesion process, interfacial viscoelasticity, and morphology depending on the surfaces were successfully monitored in situ and evaluated by the QCM-D technique combined with other techniques.