Crystal Structure of a New Ammonium Potassium Selenomolybdate Compound K3.31(NH4)0.69[Se2Mo5O21]·2H2O

An inorganic compound formulated as K_3.31(NH₄)_0.69[Se₂Mo₅O₂₁]·2H₂O has been synthesized by conventional solution method and characterized by scanning electron microscopy, IR, UV-Vis spectroscopies behaviors. The structure of the title compound has been determined from a single-crystal X-ray diffraction. It crystallizes in the monoclinic space group P2₁/n, with a?=?9.9371(2) ?, b?=?23.3545(2) ?, c?=?10.5179(2) ?, β?=?114.12(3)°, V?=?2227.7(5) ?³ and Z?=?4. It was revealed that the Strandberg-type polyoxoselenomolybdate cluster can be considered as a ring formed by five distorted edge- and corner-sharing MoO₆ octahedra, capped on both poles by a selenate pyramids sharing three vertices with the ring molybdenum centers. The Strandberg clusters are connected with ammonium ions and water molecules through hydrogen-bonding interactions which ensure the cohesion of the structure into a three-dimensional network.     

Polyazomethines Bearing Furan Moieties. Solution Polycondensation of Bis(furanic diamine)s and Aromatic Dialdehydes

A series of new polyazomethines containing furan moieties was synthesized by polycondensation of bifuranic diamine monomers with commercially available aromatic dialdehydes viz., terephthaldehyde (TPA), isophthaldehyde (IPA). Inherent viscosities and number average molecular weights of polyazomethines were in the range 0.90–1.56 dL/g and 10460–17850 (SEC, polystyrene standard), respectively indicating formation of medium to reasonably high molecular weight polymers. The resulting polyazomethines were characterized by solubility tests, viscosity measurements, FTIR, NMR, UV spectroscopy, differential scanning calorimetric (DSC), and thermogravimetric analysis (TGA). These furan-based polyazomethines were essentially amorphous and exhibited glass transition temperatures (Tg) in the 150–190°C range. The temperature at 10% wt loss (T₁₀), determined from TGA of polyazomethines were in the range 300–380°C, indicating their good thermal stability.     

Investigation of the vibrational modes of ZnO grown by MOCVD on different orientation planes

Wurtzite ZnO thin films were prepared on sapphire substrate by metal organic chemical vapor deposition (MOCVD). Raman scattering studies on different crystallographic textures were performed in the backscattering geometry, and polarization effect is investigated in different configurations and . ZnO Raman modes are investigated in each texture. In the case of ZnO thin film deposed on r‐() sapphire plane and using backscattering geometry, new Raman line was observed at 390 cm⁻¹ because this mode has not been noticed in this geometry. It is shown that the frequencies of the quasi‐phonon modes of the examined thin film are in good agreement with the theoretical values calculated within the framework of Loudon model. Copyright © 2014 John Wiley & Sons, Ltd.     

Li<Superscript>+</Superscript> ion conductivity and transport properties of LiYP<Subscript>2</Subscript>O<Subscript>7</Subscript> compound

A lithium yttrium diphosphate LiYP₂O₇ was prepared by a solid-state reaction method. Rietveld refinement of the X-ray diffraction pattern suggests the formation of the single phase desired compound with monoclinic structure at room temperature. The infrared and Raman spectrum of this compound was interpreted on the basis of P₂O₇ ^4? vibrations. The AC conductivity was measured in the frequency range from 100 to 10⁶ Hz and temperatures between 473 and 673 K using impedance spectroscopy technique. The obtained results were analyzed by fitting the experimental data to the equivalent circuit model. The Cole–Cole diagram determined complex impedance for different temperatures. The angular frequency dependence of the AC conductivity is found to obey Jonscher’s relation. The temperature dependence of σ _AC could be described in terms of Arrhenius relation with two activation energies, 0.87 eV in region I and 1.36 eV in region II. The study of temperature variation of the exponent(s) reveals two conduction models: the AC conduction dependence upon temperature is governed by the correlated barrier hopping (CBH) model in region I (T < 540 K) and non-overlapping small polaron tunneling (NSPT) model in region II (T > 540 K). The near value of activation energies obtained from the equivalent circuit and DC conductivity confirms that the transport is through ion hopping mechanism dominated by the motion of the Li⁺ ion in the structure of the investigated material.     

Use of quasi-isoelectric buffers to limit protein adsorption in capillary zone electrophoresis

The use of quasi-isoelectric buffers consisting of narrow pH cuts of carrier ampholytes (NC) has been investigated to limit protein adsorption on capillary walls during capillary zone electrophoresis experiments. To quantify protein adsorption on the silica surface, a method derived from that of Towns and Regnier has been developed. alpha-Lactalbumin (14 kDa, pI 4.8) and alpha-chymotrypsinogen A (25 kDa, pI 9.2) have been used as model proteins. Acidic narrow pH cuts of carrier ampholytes (NC, pH 3.0) obtained from fractionation of Serva 4-9 carrier ampholytes were used as BGE in bare-silica capillaries, and allowed to decrease significantly protein adsorption, as compared to experiments performed with classical formate buffer. The use of NC as BGE appeared to be as efficient as the use of polydimethylacrylamide coating to prevent protein adsorption. This increase of protein recovery when using NC was attributed to the interaction of carrier ampholytes with the silica surface, leading to a shielding of the capillary wall.     

Synthesis and Characterization of Two New Compounds: N(C2H4NH3)3(H2TO4)(HTO4)·2H2O (T = P,As)

The synthesis and structures of two new compounds with the general formula N(C₂H₄NH₃)₃(H₂TO₄)(HTO₄)·2H₂O (T = P, As) are reported. They crystallize with triclinic unit cells and are isotropic. We determined the structure of phosphate salt. The following unit cell parameters were found: a = 9.886(4), b = 9.308(2), c = 10.140(3) Å, α = 109.38(2), β = 108.83(3), γ = 74.40(3)°, V = 819.2(5) ų, and ρ_cal. = 1.537 g · cm^?3. The crystal structure was solved with a final R = 0.042 for 3748 with I > 3σ I). The space group is P-1 and Z = 2. The atomic arrangement can be described as a three-dimensional network of hydrogen bonds made up from H_nPO₄ ^3?n (n = 1, 2) anions and H ₂ O molecules between which are trapped the tris(2-ammoniumethyl)amine cations. Solid-state ¹³C and ³¹P MAS-NMR spectroscopies are in agreement with X-ray structure. Ab initio calculations allow the attribution of the phosphorus signals to the independent crystallographic sites.     

Synthesis and photochemical properties of novel pentamethylated norbornadiene containing polyimides

A novel pentamethylated norbornadiene (NBD) based dianhydride, α,α′‐bis‐(3,4,5,6,7‐pentamethylcyclopenta‐2,4‐dienyl)meta‐xylene‐1,2‐dianhydride (3), was prepared from α,α′‐bis‐(pentamethylcyclopentadienyl)meta‐xylene (1) and acetylene dicarboxylic acid. The bis‐adduct formed via Diels–Alder reaction afforded tetra‐acid (2), which was chemically cyclodehydrated to lead the targeted dianhydride (3). New polyimides containing NBD moieties in the main chain were prepared from the dianhydride monomer (3) and various aromatic diamines. The chemical structure of the polymers was confirmed by both ¹H and ¹³C NMR analysis. Their Molecular weights were also measured by SEC. All of these polyimides are soluble at room temperature in common organic solvents, such as chloroform, dichloromethane, THF, DMSO, DMF, and NMP, and show good thermal stabilities. The photochemical isomerization of the NBD into quadricyclane (QC) was investigated by UV/vis spectrophotometry from polymer films using visible sunlight as irradiation source. It was found that the kinetic rate of the conversion NBD‐QC which proceeded smoothly is a first kinetic order. The stored energies released by the transformation of QC groups into NBD ones of the irradiated polymer films were also evaluated by DSC measurement and were found to be around 90 kJ mol^?1. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Time-resolved photoluminescence of delta-doped AlGaAs/GaAs heterostructures

The photoluminescence (PL) at low temperature of three delta-doped AlGaAs/GaAs heterostructures is investigated under continuous and pulsed excitations. The PL under continuous excitations allows the identification of the trapping centres and probes the carrier's transfer to the GaAs channel. The time-resolved photoluminescence (TRPL) inquires about carrier dynamics and gives radiative lifetimes of different levels. The DX level shows two time constants of the intensity decay relating the splitting of the valence band under impurity strains which reduce the crystal symmetry. The two time constants evolve with temperature and exhibit an increase near T=50 K.     

Aspect ratio effects on three-dimensional incompressible flow in a two-sided non-facing lid-driven parallelepiped cavity

A numerical study of the three-dimensional fluid flow has been carried out to determine the effects of the transverse aspect ratio, Ay, on the flow structure in two-sided non-facing lid-driven cavities. The flow is complex, unstable and can undergo bifurcation. The numerical method is based on the finite volume method and multigrid acceleration. Computations have been investigated for several Reynolds numbers and various aspect ratio values. At a fixed Reynolds number, Re=500, the three-dimensional flow characteristics are analyzed considering four transverse aspect ratios, Ay=1,0.75,0.5 and 0.25. It is observed that the transition to the unsteady regime follows the classical scheme of a Hopf bifurcation. An analysis of the flow evolution shows that, at Ay=0.75, the flow bifurcates to a periodic regime at (Re=600) with a frequency f=0.093 less than the predicted value in the cubical cavity. A correlation is established when Ay=0.5 and gives the critical Reynolds number value. At Ay=0.25, the periodic regime occurs at high Re value beyond 3500, after which the flow becomes chaotic. It is shown that, when increasing Ay over the unit, the flow in the cavity exhibits a complex behavior. The kinetic energy transmission from the driven walls to the cavity center is reduced at low Ay values.     

Excitation process and photoluminescence properties of Tb and Eu ions in SnO2 and in SnO2: Porous silicon hosts

Tin oxide (SnO₂)-layers-doped terbium and europium ions are elaborated by the sol-gel method on silicon substrates. After annealing at 500 °C, the transmission electron microscopy revealed a crystallization of tin oxide.The emission properties of rare-earth in SnO₂ are studied systematically against temperature annealing and Tb³⁺ concentration. The PL spectrum is optimal after annealing at 900 °C and the corresponding photoluminescence (PL) decay is nearly exponential, showing that the sample is homogenous and the PL process can be described by two levels system.The concentration effect shows a quenching of the PL intensity for Tb³⁺ concentration above 4%. From the investigation of the decay rate from the ⁷F₅ state within terbium concentration, we show that self-quenching is insured by dipole - dipole interaction. The evolutions of both PL intensity and PL lifetime versus temperature are studied. The PL intensity and PL lifetime are enhanced by deposing SnO₂:Tb³⁺ and SnO₂:Eu³⁺ in porous silicon. We show that an efficient excitation transfer from Si nanocrystallites to RE ions can occur.