一些高Tc超导体的弹性性质

 本文用超声相比较方法测定了高T_c超导体La_1.85Sr_0.15CuO₄，La₂CuO₄和YBa₂Cu₃O₇的纵波和横波声速，进而导出了它们的纵向模量、切变模量、杨氏模量、泊松比、德拜温度及定体比热。在La_1.85Sr_0.15CuO₄样品上，还进行了压力实验，发现所有弹性模量都是随压强增加而增加。定体比热c_V和泊松比σ在高压下则略有下降。德拜温度是随压强增加而增加的。     

一种新型有机电致微腔结构的双模发射

采用结构Glass／DBR／ITO／NPB／NPB：Alq／Alq／Al制作了有机微腔电致发光器件。将空穴传输材料与发光材料以一定比例混合作为发光层，为了便于对比，在不改变有机层的膜厚的情况下同时制作了传统的异质结微腔器件，发现两种器件的发光光谱有很大不同，器件的复合效率与传统的异质结器件相比也得到了很大提高，这是因为将两种有机材料混合能消除界面势垒，提高器件的复合效率，从而提高了器件的发光性能，实现了微腔双模发射，且两个模式的半峰全宽分别为8nm和12nm。通过进一步优化器件结构可以实现微腔白光发射。     

担载液相催化剂的研究——Ⅳ.催化剂的原位红外光谱表征

本文利用原位红外光谱方法对铑基担载液相催化剂(SLPC)在接近于实际反应条件下进行了表征。结果表明,新鲜催化剂上,铑膦络合物主要以二聚物的形式存在,如Rh_2(CO)_2(PPh_3)_4而在合成气或反应气氛中,催化剂铑膦络合物以单核络合物HRh(CO)_2(PPh_3)_2的形式存在。文中还对SLPC在CO,H_2,C_2-H_4,空气和HCl中处理时铑络合物种的变化进行了原位观察。实验结果表明,SLPC上活性铑络合物与对应的均相过程完全一致,进一步证实了SLPC催化在微观上就是一个均相催化过程。     

羰基过渡金属异核原子簇(PPh3)2CuFe2Co(CO)8(μ3-S)和(PPh3)3AuFe2Co(CO)7(μ3-S)的合成与表征

本文利用高压法制备HFe₂Co(CO)₉(μ₃-S),作为原料,经脱质子化作用,再分别与(PPh₃)₂Cu(NO₃)和PPh₃AuCl反应,将Ph₃Cu-或Ph₃Au-联接到原始簇合物的中心骨架上,使簇核扩大,得到了组成为(PPh₃)₂CuFe₂Co(CO)₈(μ₃-S)和(PPh₃)₃AuFe₂Co(CO)₇(μ₃-S)的化合物.文中对此两个新化合物进行了IR,UV,¹H和³¹P NMR.元素分析、熔点测定等性质表征,并对(PPh₃)₂CuFe₂Co(CO)₇(μ₃-S)进行了单晶X-射线衍射分析.两个化合物具有类似的中心骨架,在Fe₂和Co原子三角形的上面和下面分别键联着Cu和S,或Au和S原子,构成了三角双锥结构.其中一个簇合物由二个三苯基膦和八个羰基配位,另一个则由三个三苯基膦和七个羰基配位.     

Effect of thermal history on crystallization and melting behaviour of lldpe

In this paper two LLDPE samples with their own structural parameters were studied by means of DSC. Experimental results show that DSC was good for revealing slight structural difference between these two samples. Furthermore, the effect of thermal history on crystallization and melting behaviour of LLDPE was observed clearly through varying conditions of thermal treatment.

---

Zusammenfassung Mittels DSC werden zwei LLDPE-Proben mit ihren eigenen Strukturparametern untersucht. Die Versuchsergebnisse zeigen, da\ sich DSC gut eignet, um gering fügige Unterschiede dieser zwei Proben nachzuweisen. Weiterhin wurde unter verschiedenen Bedingungen der Einflu\ der thermischen Vorgeschichte auf das Kristallisations-und Schmelzverhalten von LLDPE untersucht.

     

烯烃羰化—步制醇铑系催化新体系的研究

羰基铑催化剂由于其加氢性能较弱，在羰基化反应的研究中，通常仅作为烯烃氢甲酰化制醛的催化剂。产物中得不到醇。本文则报道了以Ｒｈ＿２（ＡｃＯ）＿４和Ｒｈ＿６（ＣＯ）＿１６为催化剂，在一个反应器内进行烯烃氢甲酰化，加氢制醇的研究。系统考察了Ｒｈ／Ｐｂｕ＿３／ＥｔＯＨ催化体系受各种反应条件的影响。在最佳反应条件下，烯烃转化率达１００％。对醇选择性亦在９９．５％以上，正异构比在２以上．为烯烃一步制醇建立了铑系催化新体系。文中并利用红外光谱测定了反应过程的催化剂物种．实验证明，由烯烃一步制醇是由烯烃首先进行氢甲酰化反应，然后由生成的醛进一步加氢成醇的一个串联反应过程。前一步骤反应速度较快，２ｈ内可使９５％以上的烯烃转化为醛，后面由醛加氢成醇则进行缓慢，在１００—１２０℃下，至少２２ｈ，才能使醛全部转化为醇。     

稀土-赤霉素配合物的合成与光谱表征

为了研究稀土与赤霉素的相互作用及其生物效应,在乙醇溶液中合成了两种新型稀土(Sm,Dy)-赤霉素(GA3)配合物,并对其进行了元素分析、质谱、紫外光谱、红外光谱、差热分析等表征。结果表明:配合物的组成为RE(GA3-)2Cl.6H2O(RE:Sm3+,Dy3+),镝-赤霉素配合物的热稳定性略高于钐-赤霉素配合物的。所得的两种配合物均易溶于二甲基甲酰胺、二甲基亚砜、甲醇、乙醇,不溶于水和丙酮中。     

Fluorocarbon and Hydrocarbon N‐Heterocyclic (C5–C7) Imidazole‐Based Liquid Crystals

By using three synthetic protocols, a series of fluorocarbon and hydrocarbon N‐heterocyclic imidazole‐based liquid crystals (LCs) and related imidazolium‐based ionic liquid crystals (ILCs) have been prepared. The ring size of the N‐heterocycle and the length of the N‐terminal chain (on the imidazolium unit in the ILCs) were modified, and the influence of these structural parameters on liquid‐crystal phases was investigated by means of polarizing optical microscopy (POM), differential scanning calorimetry (DSC), and X‐ray diffraction (XRD). These new ILCs exhibit a disordered smectic phase (SmA), good thermal stabilities, a broad smectic phase range, a high dipole moment, relatively low melting points, but high clearing points and strong emission fluorescence relative to imidazole‐based LCs. These encouraging results have led us to believe these fluorocarbon and hydrocarbon N‐heterocyclic imidazole‐based LCs and related imidazolium‐based ILCs could be used as new liquid‐crystalline materials.     

Electromagnetic properties and microwave absorption enhancement of Ba0.85RE0.15Co2Fe16O27-polyaniline composites: RE = Gd,Tb, Ho

The Gd-, Tb-, and Ho-doped W-type hexagonal ferrite Ba_0.85RE_0.15Co₂Fe₁₆O₂₇ was fabricated by a facile route of low-temperature sol–gel self-propagating combustion. Furthermore, a combination of dielectric loss phase polyaniline and magnetic loss phase Ba_0.85RE_0.15Co₂Fe₁₆O₂₇ as the microwave absorber in a core-shell architecture has been synthesized. The effect of different lanthanide ions Gd, Tb, and Ho on their microstructure, static magnetic properties, electromagnetic properties, and microwave reflection loss have been systematically studied. Our results show that the Ho-doped ferrite has the low microstructure parameters (a, c, and V) and high saturation magnetization (Ms) attributed to its ionic radius and magnetic moment. Moreover, it was found that the Ho-doped composite exhibited excellent microwave absorbing property with a minimum reflection loss (RL) of about ?15.1 dB at 9.4 GHz. The reflection loss of composite increases up to almost triple upon the combination of polyaniline and doped ferrite. Such lightweight and highly effective absorbers via combining the organic and inorganic phase into a core-shell architecture are highly desirable for microwave absorber in various applications. Figure

The synthesis and properties of the PANI/REBF composites