Carbon nanotube-ionic liquid nanocomposite modified carbon-ceramic electrode for determination of dopamine in real samples

Room temperature 1-butyl-3-methylimidazolium tetraflouroborate ([BMIM][BF₄]) ionic liquid was employed for dispersion of multi walled carbon nanotubes (MWCNTs) and the formation of nanocomposite on the surface of a carbon-ceramic electrode. The surface of the modified electrode was characterized using scanning electron microscopy and electrochemical impedance spectroscopy. The modified electrode exhibited excellent electrochemical activity to oxidation of dopamine (DA); whereas electro oxidation of ascorbic acid (AA) was not seen and electro oxidation of uric acid (UA) appeared at a more positive potential than DA. The multi walled carbon nanotube-ionic liquid nanocomposite modified carbon-ceramic electrode was used for the selective determination of DA in the presence of high levels of AA and UA using differential pulse voltammetry. The calibration curve for DA was linear in the range of 3.00 to 130 µM with the detection limit (S/N=3) of 0.87 µM. The present electrode was successfully applied to the determination of DA in some commercial pharmaceutical samples and human blood serum.      

Separation and preconcentration of cadmium by biological organisms and analysis by graphite furnace atomic absorption

A pure strain of algae (Stichococcus bacillaris) is utilized to preconcentrate Cd ions from dilute solutions. Cd uptake curves for several concentrations of Cd and algae mass are presented. To assess the analytical utility of this algae, the concentrations of Cd in two dilute solutions (0.288 and 0.576 μg/l) are determined using preconcentration techniques. The calculated results are within 5% of the nominal concentrations. Stichococcus bacillaris is most useful at low concentrations of analyte with nearly quantitative uptake. At higher concentrations changes in either the analyte amount, or volume of the solution drastically affect the Cd uptake by this organism     

High resolution capillary electrophoresis of carbon nanotubes

Purification of single-walled carbon nanotubes by capillary electrophoresis (CE) is demonstrated. Real-time Raman spectroscopy of the separation process and single-wavelength UV/vis detection show the ability of CE to provide high-resolution separations of nanotube fractions with baseline separation. AFM images of collected fractions demonstrate that separations are based on tube length. The separation method is suggested to be based on alignment of the nanotubes along the separation field.     

Effect of pulegone and pulegone oxide on the corrosion of steel in 1 <Emphasis Type="Italic">M</Emphasis> HCl

The inhibitive action of pulegone and pulegone oxide toward acid corrosion of steel in molar hydrochloric acid was studied by weight loss measurements, potentiodynamic polarization, and impedance spectroscopy (EIS) methods. The pulegone is extracted starting from oil of Pennyroyal Mint (Mentha pulegium). The natural compound was found to delay the corrosion rate. The pulegone oxide is prepared by oxidation of pulegone. The inhibition efficiency was found to increase with the inhibitor content to attain 81 and 75% at 5 g dm⁻³ for pulegone and pulegone oxide. The increase in temperature leads to an increase in the inhibition efficiency of the natural compared. Correspondence: Belkheir Hammouti, Laboratoire de chimie Appliquée & Environnement, Faculté des Sciences, B.P. 717, 60000 Oujda, Morocco.     

Remarks on formulating an adhesion problem using Euler’s elastica (draft)

Three formulations for the problem of an elastica adhering to a rigid surface are discussed and compared. These include stationary principles, the surface integral of Eshelby’s energy-momentum tensor, and the material (configurational) force balance. The configuration at static equilibrium is predicted in closed form for a pair of structures that arise in nano- and microscale applications.     

A sunlight-induced method for rapid biosynthesis of silver nanoparticles using an <Emphasis Type="Italic">Andrachnea chordifolia</Emphasis> ethanol extract

In this study a sunlight-induced method for rapid synthesis of silver nanoparticles using an ethanol extract of Andrachnea chordifolia is described. The silver nitrate solutions (1 mM) containing the ethanol extract of Andrachnea chordifolia were irradiated by both sunlight radiation and by sunlight radiation passed through different colored filters (red, yellow or green). The smallest size of silver nanoparticles was obtained when a silver ion solution was irradiated for 5 minutes by direct sunlight radiation. Further examination of the shape and size and of the surface chemistry of these biogenic silver nanoparticles, which were prepared under sunlight radiation, was carried out using transmission electron microscopy and infrared spectroscopy, respectively. Transmission electron microscopy images show spherical particles with an average size of 3.4 nm. Hydroxyl residues were also detected on the surface of these biogenic silver nanoparticles fabricated using plant extract of Andrachnea chordifolia under sunlight radiation. Our study on the reduction of silver ions by this plant extract in darkness shows that the synthesis process can take place under dark conditions at much longer incubations (48 hours). Larger silver polydispersed nanoparticles ranging in size from 3 to 30 nm were obtained when the silver ions were treated with the ethanol extract of Andrachnea chordifolia under dark conditions for 48 hours.     

Swirl effects on variable-density jet mixing in confined flows

An experimental investigation on swirl effects on inhomogeneous confined jet mixing in a combustor configuration is reported. The confined swirling flow was simulated by a swirler with a central jet mounted in a cyclindrical tube. Helium and air jets set at different velocities were injected into the confined swirling air flow. The resulting flow fields due to two vane swirlers with constant vane angles of 35° and 66° were compared. Results show that the 35° vane swirler produces a solid-body rotation core with a slope about twice that created by the 66° vane swirler. It is the behavior of this solid-body rotation core that determines jet mixing rather than the swirler vane angle. Consequently, the coaxial jet decays much faster, the mixing is more intense, and the turbulence intensities are higher for the 35° vane swirler. In view of these results, combustor designers should be more concerned with behavior of the solid-body rotation core produced by the swirler, instead of the swirler vane angle.     

Determination of Imidacloprid in Tomato Grown in Greenhouse Based on Copper(II) Phthalocyanine Modified Carbon Ceramic Electrode by Differential Pulse Voltammetry

A new sol‐gel derived electrocatalytic carbon ceramic electrode was prepared by incorporating copper(II) phthalocyanine (CuPc) in a carbon ceramic network. This electrode was used as a sensitive electrochemical sensor for determination of the insecticide Imidacloprid (1‐(6‐chloro‐3‐pyridylmethyl)‐N‐nitro‐imidazolidin‐2‐ylideneamine) by differential pulse voltammetry (DPV). The resulting modified electrode exhibits a cathodic peak potential shifted positively and an increasing in cathodic peak current in comparison with unmodified electrode. The redox properties of this modified electrode at various pH values and CuPc percentage were investigated. The catalytic current obtained from differential pulse voltammetry is linearly dependent on Imidacloprid concentration over the two linear ranges of 0.67‐17 μM and 17‐93 μM with correlation coefficient of R² = 0.9999 and R² = 0.990, respectively. The detection limit for Imidacloprid was found to be 0.28 μM according to lower linear range. Possible interferences from several common pesticides were also evaluated. The inherent stability, high sensitivity, low detection limit and low cost for each preparation are advantages of this sensor. Determination of Imidacloprid in commercial formulation and residual Imidacloprid in tomato grown in greenhouse (protected cultivation) was also conducted. The results obtained from commercial formulation were completely consistent with those obtained through the standard high‐performance liquid chromatography (HPLC) method.     

Encapsulation of small fullerenes into nitrogenated holey nanotubes: a density functional theory study

Encapsulation of fullerene into nanotubes based on a C₂N sheet, known as nitrogenated holey graphene, was investigated using density functional theory. The structural and electronic properties of these carbon hybrid materials, consisting of nitrogenated holey nanotubes and a small C₂₀ fullerene, were studied. The formation energies showed that encapsulation of the fullerene into the nitrogenated holey nanotube is an exothermic process. To characterise the electronic properties, the electronic band structure and density of states of armchair and zigzag nitrogenated holey nanotubes were calculated. Filling these nanotubes with the C₂₀ fullerene resulted in a p-type semiconducting character. The energy band gap of the nitrogenated holey nanotubes decreased with fullerene encapsulation. The results are indicative of the possibility of band gap engineering by encapsulation of small fullerenes into nitrogenated holey nanotubes.     

Sol‐Gel‐Derived Biosensor Based on Plant Tissue: The Inhibitory Effect of Atrazine on Polyphenol Oxidase Activity for Determination of Atrazine

This work presents a sol‐gel based biosensor for atrazine determination which has been obtained by introducing the enzyme polyphenol oxidase from apple tissue in a sol‐gel matrix. Apple tissue acts as a molecular recognition element. Atrazine is an inactive compound electrochemically; redox coupling of dopamine was used for studying atrazine behavior. Atrazine was determined by monitoring the inhibition power of polyphenol oxidase activity. The measurements were performed in 0.1 M KH₂PO₄‐NaOH buffer (pH 7.5). The effect of various experimental parameters such as pH, concentration of buffer, concentration of dopamine, incubation time and matrix composition has been investigated for optimum analytical performance. The biosensor consisted of 10.3% (w/w) of apple tissue. The bioelectrode exhibits a linear response for dopamine and atrazine concentrations in the range of 5.66 × 10^?6?2.27 × 10^?3M and 1 × 10^?5 ?1 × 10^?4 M with a detection limit of 4.2 × 10^?6 and 5.5 × 10^?6 M, respectively. A correlation coefficient of 0.9945 and a relative standard deviation (R.S.D.) of 3.29% for dopamine, 0.9944 and 3.69% for a trazine were achieved.