Polymer nanoparticles with a sensitive CO2‐responsive hydrophilic/hydrophobic surface

Poly(methyl methacrylate) (PMMA) nanoparticles with a sensitive CO₂‐responsive hydrophilic/hydrophobic surface that confers controlled dispersion and aggregation in water were prepared by emulsion polymerization at 50 °C under CO₂ bubbling using amphiphilic diblock copolymers of 2‐dimethylaminoethyl methacrylate (DMAEMA) and N‐isopropyl acrylamide (NIPAAm) as an emulsifier. The amphiphilicity of the hydrophobic–hydrophilic diblock copolymer at 50 °C was triggered by CO₂ bubbling in water and enabled the copolymer to serve as an emulsifier. The resulting PMMA nanoparticles were spherical, approximately 100 nm in diameter and exhibited sensitive CO₂/N₂‐responsive dispersion/aggregation in water. Using copolymers with a longer PNIPAAm block length as an emulsifier resulted in smaller particles. A higher concentration of copolymer emulsifier led to particles with a stickier surface. Given its simple preparation and reversible CO₂‐triggered amphiphilic behavior, this newly developed block copolymer emulsifier offers a highly efficient route toward the fabrication of sensitive CO₂‐stimuli responsive polymeric nanoparticle dispersions. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2149–2156     

Production,Purification and Characterization of the Hen Egg-White Lysozyme Inhibitor from Enterobacter cloacae M-1002

Three hen egg-white lysozyme inhibitor producing strains, Enterobacter cloacae M-1002, E. sakazakii M-1204, and Erwinia rhapontici H-55, were isolated from the soils of Taiwan. E. cloacae M-1002 appeared to be a promising inhibitor producing strain. One inhibitor was isolated from the culture broth of this strain. Maximum lysozyme inhibitory activity was obtained when the bacterium was grown aerobically in a medium consisting of 0.75% glucose, 0.25% beef extract, 1.0% polypeptone, and 0.25% sodium L-glutamate (pH 70) at 37 °C after 36–48 hrs. A hen egg-white lysozyme inhibitor was isolated from the culture broth of this strain. The inhibitor was purified from the culture supernatant of E. cloacae M-1002 by ammonium sulfate fractionation, DEAE-Sepharose CL-6B column chromatography and Fractogel TSK HW-55 (S) gel chromatography. Molecular weight of the purified lysozyme inhibitor was estimated to be 18, 000–20, 000 by SDS-PAGE and HPLC, and was composed of 71% amino acid and 23% total sugar. Serine, glycine, and alanine in a 3:2:1 molar ratio were the major amino acids, calculated to be 32.8, 20.3, and 11.4% (mol%), respectively. Glucose and mannose were the major sugar components of the inhibitor. The inhibitor was stable at pH 5 to 8 and was stable under 50 °C. Only hen egg-white lysozyme was inhibited by the purified inhibitor but not the other tested enzymes such as lysozyme of celery, turnip; lytic enzyme of Pseudomonas aeruginosa M-1001; chitinase/lysozyme of P. aeruginosa K-187; or cellulase and xylanase of Streptomyces actuosus A-151 and Aspergillus sp. G-393. The inhibition of lysozyme to the bacterial cell lytic activity by the purified inhibitor was 100%.     

Bayesian Prediction Analysis for Growth Curve Model Using Noninformative Priors

We apply a Bayesian approach to the problem of prediction in an unbalanced growth curve model using noninformative priors. Due to the complexity of the model, no analytic forms of the predictive densities are available. We propose both approximations and a prediction-oriented Metropolis-Hastings sampling algorithm for two types of prediction, namely the prediction of future observations for a new subject and the prediction of future values for a partially observed subject. They are illustrated and compared through real data and simulation studies. Two of the approximations compare favorably with the approximation in Fearn (1975, Biometrika, 62, 89–100) and are very comparable to the more accurate Rao-Blackwellization from Metropolis-Hastings sampling algorithm.     

束流线性耦合效应的初步研究

在储存环的束流传输系统中,斜四极场和纵向螺线管场是引起束流线性耦合的主要原因.由于这种耦合,使得束流的幅度和发射度发生交换,引起束流横向包络的增大,严重的将造成束流损失.从Betatron运动方程出发研究了斜四极场和螺线管场存在时束流的幅度耦合效应,分析了斜四极场存在时束流发射度的变化.     

An expedient synthesis of an isofervenulin analogue

An efficient approach has been developed for the synthesis of an isofervenulin analogue 1 employing a one‐pot condensation‐substitution reaction of a chlorocarboethoxytriazine (electrophile) with a urea (nucleophile). The resulting cyclization reaction resulted in the synthesis of a pyrimido‐heterocycle in good yield in either acidic or basic media. The former was assisted by utilizing trimethylsilyl chloride.     

Temperature‐modulated differential scanning calorimetry studies on the origin of double melting peaks in isothermally melt‐crystallized poly(L‐lactic acid)

In this work, the melting behaviors of nonisothermally and isothermally melt‐crystallized poly(L ‐lactic acid) (PLLA) from the melt were investigated with differential scanning calorimetry (DSC) and temperature‐modulated differential scanning calorimetry (TMDSC). The isothermal melt crystallizations of PLLA at a temperature in the range of 100–110 °C for 120 min or at 110 °C for a time in the range of 10–180 min appeared to exhibit double melting peaks in the DSC heating curves of 10 °C/min. TMDSC analysis revealed that the melting–recrystallization mechanism dominated the formation of the double melting peaks in PLLA samples following melt crystallizations at 110 °C for a shorter time (≤30 min) or at a lower temperature (100, 103, or 105 °C) for 120 min, whereas the double lamellar thickness model dominated the formation of the double melting peaks in those PLLA samples crystallized at a higher temperature (108 or 110 °C) for 120 min or at 110 °C for a longer time (≥45 min). © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 466–474, 2007     

Nanoparticle composites: FePt with wide-band-gap semiconductor

We present a simple way to synthesize FePt and ZnO (wide-band-gap semiconductor) nanoparticle composites. The FePt nanoparticles were fabricated using the method reported by Sun et al. By controlling the heating rate, 3 nm FePt nanoparticles were synthesized. Well-dispersed FePt and ZnO nanoparticle composites were prepared by further adding zinc acetate and oleyl amine into the 3 nm FePt nanoparticle dispersion. By controlling the molar ratio of the FePt and zinc acetate, FePt and ZnO nanoparticle composites with different FePt particle fractions were obtained. The intensity of photo luminescence spectra of the nanoparticle composites increases very much with decreasing FePt particle fraction, whereas the peak position shifts a little. After annealing at 550 °C for half an hour, the nanoparticle composites become magnetically hard or semi-hard with coercivity much dependent on the FePt particle volume fraction. The coercivity of the composites increases with annealing temperature. The composites hold the promise of applications in new generation recording and/or optical devices.     

Robust Output Tracking Control of an Uncertain Linear System via a Modified Optimal Linear-Quadratic Method

This study investigates the robust output tracking problem for a class of uncertain linear systems. The uncertainties are assumed to be time invariant and to satisfy the matching conditions. According to the selected nominal parameters, an optimal solution with a prescribed degree of stability is determined. Then, an auxiliary input via the use of an adapting factor, connected to the nominal optimal control, is introduced to guarantee the robustness and prescribed degree of stability for the output tracking control of the uncertain linear systems. This method is very simple and effective and can reject bounded uncertainties imposed on the states. A maglev vehicle model example is given to show its effectiveness.     

Vacuum Fluctuations and Motion of a Charged Test Particle in a Cylindrical Spacetime

The effects of quantum electromagnetic fluctuations upon the motion of a test charged particle are examined in a cylindrical spacetime in which one spatial is compactified. The mean squared fluctuations in the velocity and position of the test particle are calculated. It is found that the random motion of the test particle will be anisotropic. The possible consequences for theories with extra compactified spatial dimensions are discussed.     

ECR-SFC轴向注入系统聚束器效率的研究

为了减少目前SFC轴向注入系统中聚束器杂散电场对束流轴向注入效率的影响, 提高新系统中SFC的束流俘获效率, 参考原始设计, 对目前聚束器的电极结构进行了设计改进. 两种情况下的聚束器杂散场对注入效率影响的计算表明, 改进后0B02的聚束效率较目前有较大提高. 同时计算了束流空间电荷效应对聚束效率的影响, 据此对新SFC轴向注入系统中聚束器的位置进行了重新调整.