Hopping domain wall induced by paired adatoms on an atomic wire: si(111)-(5 x 2)-Au

We observed an inhomogeneous fluctuation along one-dimensional atomic wires self-assembled on a Si(111) surface using scanning tunneling microscopy. The fluctuation exhibits dynamic behavior at room temperature and is observed only in a specific geometric condition; the spacing between two neighboring adatom defects is discommensurate with the wire lattice. Upon cooling, the dynamic fluctuation freezes to show the existence of an atomic-scale dislocation or domain wall induced by such "unfavorably" paired adatoms. The microscopic characteristics of the dynamic fluctuation are explained in terms of a hopping solitonic domain wall, and a local potential for this motion imposed by the adatoms is quantified.     

Easily Scalable Shell-Structured Copper Catalyst with High Activity and Durability for Carbon Dioxide Hydrogenation

Inducing strong metal-support interaction (SMSI) has been a useful way to control the structure of surface active sites. The SMSI often causes the encapsulation of metal particles with an oxide layer. Herein, an amorphous ceria shell was formed on Cu nanoparticles under a mild gas condition with high activity and durability for surface reaction. Cu−Ce solid solution promoted the transfer of surface oxygen species, which induced the ceria shell formation on Cu nanoparticles. This catalyst was used for CO₂ hydrogenation, selectively producing CO with high low-temperature activity and good durability for operation at high temperature. CO₂ activation and H₂ spillover could occur at low temperatures, enhancing the activity. The shell prevented the sintering, assuring durability. This catalyst was applied to a bench-scale reactor without loss in performance, resulting in high CO productivity in all temperature ranges.     

Development of a Quantitative Method for Detection of Multiclass Veterinary Drugs in Feed Using Modified QuPPe Extraction and LC–MS/MS

A method was developed for the rapid and quantitative analysis of 30 veterinary drugs belonging to 17 classes (amphenicols (1), anthelmintics (1), cephalosporins (4), coccidiostats (1), lincosamides (1), macrolide (1), nitroimidazole (1), penicillins (3), phenylhydrazines (1), polypeptides (1), pyrethrins (1), quinolones (5), sulfonamides (3), tetracycline (3), neuroleptic agents (1), triazene trypanocidal agents (1), other. (1)) in feeds. The proposed method with a modified Quick Polar Pesticides (QuPPe) sample preparation was validated for the determination of 30 veterinary drugs in feed samples by liquid chromatography triple-quadrupole mass spectrometry (LC–MS/MS). The sample was extracted with methanol containing 1% acetic acid and purified by dispersive solid-phase extraction (d-SPE) with C18. Good linearity (r² ≥ 0.98) was observed, and the LOQ values ranged from 10 to 200 µg/kg. Average recoveries ranged from 70.8 to 118.4%, and the relative standard deviation was ≤ 18.7%. This validated method was used in the determination of 30 veterinary drugs in 142 feed samples obtained from South Korea. The results show that lincomycin was present in only one of the tested feed samples, although it was detected at a value lower than the LOQ. In conclusion, this multi-residue method can be used for screening through the detection and quantitation of residual multiclass veterinary drugs in feed samples.     

Growth of multiwalled carbon nanotubes from acetylene over in situ formed Co nanoparticles on MgO support

The performance of Co catalysts supported on MgO at different Co loading (10%-75%) for the formation of carbon nanotubes through acetylene decomposition at 600 ^°C with H₂/C₂H₂ mixture for 1 h is investigated. The yield of MWNTs increases with an increase in Co loading (up to 50%). Starting from 1 g of catalyst precursor, about 8 g of MWNTs was obtained. The XRD patterns of catalyst precursor indicate the presence of cobalt in oxidic phase that eventually transformed into the catalytically active Co nanoparticles (12-18 nm) under the influence of acetylene and was responsible for the growth of coiled-like multi-walled CNTs as revealed by SEM and HRTEM images. It is suggested that bending in coil shaped MWNTs has the potential for functionalization for its biomedical applications.     

Interfacial tension of a nematic liquid crystal/water interface with homeotropic surface alignment

Pendant drop experimental results are presented for the temperature dependence of the interfacial tension between water and the immiscible nematic liquid crystal 4'-pentyl-4-biphenylcarbonitrile (5CB) in the presence of the adsorbed surfactant cetyltrimethylammonium bromide (CTAB). Adsorption of the surfactant lowers the interfacial tension value and is also known from earlier work to induce a transition in liquid crystal surface alignment from planar to homeotropic [Brake et al. Langmuir 2003, 19, 6436.]. Discrepancies exist in the literature regarding the density of 5CB, and the density difference between 5CB and water in any case is very small. However, from the ability to form pendant 5CB drops, one may infer that the density of 5CB exceeds that of water over the entire temperature range studied (28-41 degrees C), in disagreement with the predictions of one earlier report on 5CB. The interfacial tension is shown to exhibit a relative maximum near the bulk 5CB nematic-isotropic transition temperature T(NI), regardless of which published data set of 5CB density values is used to analyze the measurements, with a possible discontinuity in tension occurring at T(NI). The anomalous shape of the interfacial tension curve, depending on the choice of the 5CB density data set, may be quite similar to that recently reported for the interface between 5CB and a hydrophobic, isotropic molten polymer (Rai et al. Langmuir 2003, 19, 7370).     

A novel mesophase formed by top-shaped molecules in the bulk and unsupported thin films: a molecular dynamics study

We have used molecular dynamics simulations to investigate the ordering of top-shaped molecules in bulk phases and in unsupported thin films. Each rigid anisotropic molecule was composed of 11 Lennard-Jones interaction centers (beads). In an attempt to enhance the nematic stability in preference to smectic, the three central beads were assigned a larger Lennard-Jones diameter than the tail beads, giving the molecule a shape resembling a top. The molecular model was found to exhibit an unusual bulk mesophase with long-range orientational order and with molecular center-of-mass positions arranged in parallel interdigitated layers, with layer spacing smaller than half the length of the long axis of a molecule. However, despite the toplike molecular shape, no nematic phase was observed in the pressure range studied. Unsupported films of the isotropic liquid were cooled in order to locate a triple point between the novel mesophase, vapor, and isotropic liquid. At temperatures slightly above the triple point, enhanced surface ordering of molecules was found to occur in the unsupported film. At temperatures slightly below the triple point, the preferred molecular alignment in the unsupported film was parallel to the interface, in violation of arguments that have been proposed based on the relative enthalpies of various cleavage planes for close-packed structures.     

A comparison of ether- and alkyl-derivatized imidazolium-based room-temperature ionic liquids: a molecular dynamics simulation study

Molecular dynamics simulations of ether-derivatized imidazolium-based room-temperature ionic liquids (EDI-RTILs), [C(5)O(2)mim][TFSI] and [C(5)O(2)mim][BF(4)], have been performed and compared with simulations of alkyl-derivatized analogues (ADI-RTILs). Simulations yield RTIL densities, self-diffusion coefficients and viscosity in excellent agreement with experimental data. Simulations reveal that structure in the EDI-RTILs, quantified by the extent of nanoscale segregation of tails as well as cation-ion and cation-cation correlations, is reduced compared to that observed in the ADI-RTILs. Significant correlation between ether tail oxygen atoms and imidazolium ring hydrogen atoms was observed in the EDI-RTILs. This correlation is primarily intramolecular in origin but has a significant intermolecular component. Competition of ether oxygen atoms with oxygen atoms of TFSI(-) or fluorine atoms of BF(4)(-) for coordination of the ring hydrogen atoms was found to reduce the extent of cation-anion correlation in the EDI-RTILs compared to the ADI-RTILs. The reduction in intermolecular correlation, particularly tail-tail segregation, as well as weakening of cation-anion specific interactions due to the ether tail, may account for the faster dynamics observed in the EDI-RTILs compared to ADI-RTILs.     

Advantageous swirling flow in 45° end-to-side anastomosis

The effects of swirling flow on the flow field in 45° end-to-side anastomosis are experimentally investigated using a particle image velocimetry technique to reveal fluid dynamic advantages of swirling flow in the vascular graft. Non-swirling Poiseuille inlet flow unnecessarily induces pathological hemodynamic features, such as high wall shear stress (WSS) at the ‘bed’ side and large flow separation at the ‘toe’ side. The introduction of swirling flow is found to equalize the asymmetric WSS distribution and reduces the peak magnitude of WSS. In particular, the intermediate swirling intensity of S = 0.45 induces the most uniform axial velocity and WSS distributions compared with weaker or stronger swirling flows, which addresses the importance of proper selection of swirling intensity in the vascular graft to obtain optimum flow fields at the host vessel. In addition, swirling flow reduces the size of flow separation because it disturbs the formation of Dean-type vortices in secondary flow and inhibits secondary flow collision. The beneficial fluid dynamic features of swirling flow obtained in this study are helpful for designing better vascular graft suppressing pathological hemodynamic features in the recipient host vessel.     

Synthesis of polycarbosilanes having a five‐membered cyclic carbonate structure and their application to prepare gel polymer electrolytes for lithium ion batteries

A silacyclobutane having a five‐membered cyclic carbonate structure (SBMC) was prepared, and its transition metal‐catalyzed ring‐opening polymerization at the four‐membered carbosilane unit was investigated as well as formation of carbosilane networked polymers and polymer gel electrolytes. The SBMC was synthesized by epoxidation of 1‐(4‐butenyl)‐1‐methylsilacyclobutane followed by insertion of CO₂ to the epoxide. Ring‐opening polymerization of the silacyclobutane moiety in the SBMC readily proceeded by a transition metal catalyst such as platinum divinyltetramethyldisiloxane complex. A flexible networked polymer film was obtained by copolymerization of the SBMC with a small amount of crosslinker, hexamethylene‐1,6‐bis(1‐methylsilacyclobutane) (HMBS). The copolymerization of SBMC and HMBS in 1 M LiPF₆ solution in ethylene carbonate and diethyl carbonate (3/7 v/v) gave a gel polymer electrolyte, which showed good ionic conductivity and could be applied to lithium ion batteries. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012