Interfacial adsorption state of protonated lipophilic porphyrins in a liquid-liquid system by using reflection spectrometry.

Analysis by reflection spectrometry was performed to clarify the interfacial adsorption of protonated lipophilic tetraphenylporphyrin derivatives in a dodecane-aqueous sulfuric acid system, and to confirm the utility of partial reflection spectroscopy. Interfacial adsorption was not observed for porphyrins substituted at the 2,6 positions of meso-phenyl groups, suggesting that the substituents prevent porphyrins from forming aggregates by steric hindrance. Polymorphous J-aggregates of acid dications were produced by tetra-p-tolylporphyrin with a saturated interfacial molecular density of 1.0 x 10(-10) mol cm(-2), which could yield 48 degrees as a mean tilting angle of the pyrrole ring plane from the interface normal. Partial-reflection spectrometry can provide sensitive detection and molecular orientation analysis of interfacial adsorbates.     

Major-to-ultratrace elements in bone-marrow fluid as determined by ICP-AES and ICP-MS.

The major-to-ultratrace elements in human bone-marrow fluid were determined by ICP-AES (inductively coupled plasma atomic emission spectrometry), and ICP-MS (inductively coupled plasma mass spectrometry). The bone-marrow fluid sample was centrifuged prior to acid digestion to exclude the bone piece from bone marrow, and then digested with nitric acid. As a result, 20 elements could be determined over the concentration range from 1610 microg g(-1) for Na to 0.00043 microg g(-1) for W. It was found that Fe, Zn and Sb were enriched by ca. 264-, 7- and 15-fold, respectively, in bone-marrow fluid, compared to those in human blood serum. Alkali metals (K, Rb, Cs), except for Na, were also significantly enriched in bone-marrow fluid. Furthermore, the concentrations of various elements, such as Fe, P, Al, Zn, Cu, Se, Zr, Sn, Ag and W, were significantly higher than those in open seawater.     

Viscoelasticity and birefringence of polyisoprene

The complex Young's modulus, E^*(ω), and the complex strain-optical coefficient, O^*(ω), which is the ratio of the birefringence to the strain, were measured for polyisoprene (PIP) over a frequency range of 1 ～ 130 Hz and a temperature range of 22 ～ ?100°C. The imaginary part of O^*, O″, was positive at low frequencies and negative at high frequencies. The real part, O′, was always positive and showed a maximum. The complicated behavior of O^* could be understood by the assumption that E^* = E_R^* + E_G^* and O^* = C_RE_R^* + C_GE_G^*, where E_R^* and E_G^* were complex quantities and C_R and C_G were constants. The C_R value, equal to the ordinary stress-optical coefficient measured in the rubbery plateau zone, was 2.0 × 10^?9 Pa^?1. The C_G value, defined as the ratio O″/E″ in the glassy zone, was ?1.1 × 10^?11 Pa^?1. The E_G^*, which was the major component of E^* in the glassy zone, showed almost the same frequency dependence as that of polystyrene and polycarbonate. The E_R^*, which was dominant in the rubbery zone, was described well by the bead-spring theory. The temperature dependence of the E_G^* was stronger than that of the E_R^*. This difference caused the breakdown of the thermorheological simplicity for E^* and O^* around the glass-to-rubber transition zone. © 1995 John Wiley & Sons, Inc.     

Sorption of ethanesulfonic acid by nylon-6 containing various numbers of end groups

From the analysis of the permeation of ³⁵S labeled ethanesulfonic acid, through nylon-6 films sorption isotherms were obtained. The films are characterized by their largely different content of carboxyl and amino end groups. It was found that the shape of the isotherm depends on the molar ratio of the two end groups: an S-shape curve for the film containing the carboxyl end group larger than the amino end group and a Langmuir-type curve for the film containing comparable numbers of end groups. These results were explained by the McGregor-Harris theory in which the acid dissociation constants of the two end groups in nylon were estimated experimentally.     

Transformation of Cinchona alkaloids into 1-N-oxide derivatives by endophytic Xylaria sp isolated from Cinchona pubescens

The microbial transformation of four Cinchona alkaloids (quinine, quinidine, cinchonidine, and cinchonine) by endophytic fungi isolated from Cinchona pubescens was investigated. The endophytic filamentous fungus Xylaria sp. was found to transform the Cinchona alkaloids into their 1-N-oxide derivatives.     

Thermal latency of novel chelating borate catalysts as latent catalysts for epoxy–phenolic resins

Novel quaternary ammonium bis(2‐oxybenzoyloxy)borate salts ( 1a – 1c ) or quaternary ammonium bis(1,2‐benzenedioxy)borate salts ( 2a and 2b ) with tetra‐n‐butylammonium (TBA⁺), tetra‐n‐octylammonium (TOA⁺), or bis(triphenylphosphoranylidene)ammonium (PNP⁺) cations were synthesized as latent catalysts of epoxy/phenol–novolac resins by the complexation between boric acid and salicylic acid or catechol, followed by neutralization with quaternary ammonium hydroxide. Polyaddition reactions of diglycidyl ether of bisphenol A (DGEBA) and 4,4′‐bisphenol F (44BPF) or bisphenol F (BPF‐D) with the ammonium borates were investigated as model reactions of epoxy/phenol–novolac resin systems with respect to the thermal latency and storage stability of the catalyst. The polyaddition of DGEBA/44BPF with 1a – 1c in diglyme at 150 °C for 6 h proceeded up to 85–96% conversions and gave polymers with number‐average molecular weights of 4180–10,500, whereas the polyaddition at 80 °C for 6 h gave less than 8% conversions. However, the polyaddition with 2a containing TBA⁺ cation proceeded to only a 32% conversion at 150 °C for 6 h in diglyme and to a 64% conversion even at 180 °C for 6 h in triglyme and only gave low molecular weight oligomers, and no reaction proceeded in the polyaddition at 80 °C. However, polyaddition with 2b containing PNP⁺ cation proceeded up to a 96% conversion at 150 °C for 6 h in diglyme and gave a higher molecular weight polymer with a number‐average molecular weight of 8050, whereas the polyaddition at 80 °C for 6 h gave only a 5% conversion. The catalytic activity of ammonium borates 1a – 1c and 2a and 2b depended on the borate anion structure: 1a and 1c with bis(2‐oxybenzoyloxy)borate anion revealed higher activity than 2a and 2b with bis(1,2‐benzenedioxy)borate anion, respectively. In comparison with tetra‐n‐butylammonium bromide (TBAB) as a conventional ammonium salt or tetra‐n‐butylammonium tetrakis(benzoyloxy)borate (TBA‐TBB), 1a – 1c and 2b revealed better thermal latency. The catalytic activity of ammonium borates also depended on the bulkiness of the ammonium cation, and the order of activity was 1c (PNP⁺) > 1b (TOA⁺) ≧ 1a (TBA⁺) and 2b (PNP⁺) > 2a (TBA⁺). The storage stability of DGEBA/BPF‐D with the ammonium borate catalysts 1a – 1c and 2a and 2b in bulk at 40 °C was much better than that with TBAB and TBA‐TBB. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2702–2716, 2002     

A total synthesis of spiruchostatin A

We achieved the total synthesis of the histone deacetylase inhibitor spiruchostatin A, as the prelude to the preparation of a combinatorial library of its analogues. Two key reactions were an asymmetric acetate aldol reaction using a Zr-enolate and macrolactonization using the Shiina method.