Electrical properties and memory effect in the field effect transistor based on organic ferroelectric insulator and pentacene

We have fabricated a field effect transistor (FET) based on an organic ferroelectric insulator and molecular conductor, and investigated the electrical properties and memory effects on the PEN-FET. We have observed a drastic change in the drain current at around the coercive electric fieldE _c of the organic ferroelectric insulator in not only a FET (PEN-FET) based on a pentacene (PEN) film but also a FET (IPEN-FET) based on an iodine doped PEN film. The magnitude of the change of the drain current for the IPEN-FET is 200 times larger than that for the PEN-FET. It is expected from these results that the PEN-FET (especially the IPEN-FET) is an improvement in such devices, since it operates at a low gate electric field accompanied by the appearance of the spontaneous polarization in the organic ferroelectric insulator. In addition, we have found that the drain current for the PEN-FET does not return to the initial drain current ofE _G =0 V/cm for more than one week, even if the gate electric field is changed to 0 V/cm from 500 V/cm(>E _c ). From these results, it is suggested that the PEN-FET becomes a memory device.     

Fischer-Tropsch synthesis over cobalt catalysts supported on modified SiO2 with mesoporous silica

SiO₂ was modified by hexagonal mesoporous silica to form a mixture with meso-/macroporous sizes and used as support of Co catalysts for Fischer-Tropsch synthesis in a slurry phase. A synergistic effect on the activity of Co catalyst was found. The catalytic properties are related to the state of surface Co and the character of support.     

Structures of TMC-95A-D: novel proteasome inhibitors from Apiospora montagnei sacc. TC 1093

Four novel proteasome inhibitors, TMC-95A-D (1-4) have been isolated from the fermentation broth of Apiospora montagnei Sacc. TC 1093, isolated from a soil sample. All of the molecular formulas of 1-4 were established as C(33)H(38)N(6)O(10) by high-resolution FAB-MS. Their planar structures were determined on the basis of extensive analyses of 1D and 2D NMR, and degradation studies. Compounds 1-4 have the same planar structures to each other, and are unique highly modified cyclic peptides containing L-tyrosine, L-aspargine, highly oxidized L-tryptophan, (Z)-1-propenylamine, and 3-methyl-2-oxopentanoic acid units. The absolute configuration at C-11 and C-36 of 1-4 was determined based on chiral TLC and HPLC analyses of their chemical degradation products. The ROESY analysis along with (1)H-(1)H coupling constants clarified the absolute stereochemistry at C-6, -7, -8, and -14 of the cyclic moieties. These studies revealed the relationships of 1-4 to be diastereomers at C-7 and C-36.     

On the correlation of the glass transition temperature of a copolymer with its comonomer sequences

The glass transition temperature of a copolymer depends not only on chemical composition but also on its comonomer sequences. This experimental fact is explained by Barton's and Johnston's equations. Their equations, though complicated, become simple, if a suitable parameter is used to describe the comonomer sequences. It is shown that with these new expressions, their equations can be used to understand glass transition temperatures of two additional types of copolymers, compatible multiblock copolymers and homopolymers with various tacticities treated as steric copolymers.Dedicated to Professor Bernhard Wunderlich on the occasion of his 65th birthdayWe wish to thank the reviewer for his/her kind linguistic improvement of this article.     

Chemo-enzymatic synthesis of 2′,3′-dideoxy-3′-fluoro-β-d-guanosine via 2,3-dideoxy-3-fluoro-α-d-ribose 1-phosphate

2,3-Dideoxy-3-fluoro-α-d-ribose 1-phosphate 2 was stereoselectively synthesized and converted to 2′,3′-dideoxy-3-fluoro-β-d-guanosine 1 by enzymatic reaction using purine nucleoside phosphorylase. This chemo-enzymatic strategy was first applied to the synthesis of 1.     

Preparation of enol ethers by carbonyl olefination utilizing an alkoxymethyl chloride-titanocene(II) system

Aldehydes, ketones, esters and lactones are transformed into enol ethers or 1,2-dialkoxy-1-alkenes by treatment with organotitanium species prepared from alkoxymethyl chlorides and a titanocene(II) complex.     

Photophysical and (photo)electrochemical properties of a coumarin dye

A new coumarin dye, cyano-{5,5-dimethyl-3-[2-(1,1,6,6-tetramethyl-10-oxo-2,3,5,6-tetrahydro-1H,4H,10H-11-oxa-3a-aza-benzo[de]anthracen-9-yl)vinyl]cyclohex-2-enylidene}-acetic acid (NKX-2753), was prepared and characterized with respect to photophysical and electrochemical properties. It was employed as a dye sensitizer in dye-sensitized solar cells and showed efficient photon-to-electron conversion properties. The photocurrent action spectrum exhibited a broad feature with a maximum incident photon-to-electron conversion efficiency (IPCE) of 84% at 540 nm, which is comparable to that for the famous red dye RuL2(NCS)2 (known as N3), where L stands for 2,2'-bipyridyl-4,4'-dicarboxylic acid. The sandwich-type solar cell with NKX-2753, under illumination of full sun (AM1.5, 100 mW cm(-2)), produced 16.1 mA cm(-2) of short-circuit photocurrent, 0.60 V of open-circuit photovoltage, and 0.69 of fill factor, corresponding to 6.7% of overall energy conversion efficiency using 0.1 M LiI, 0.05 M I2, 0.1 M guanidinium thiocyanate, and 0.6 M 1,2-dimethyl-3-n-propyl-imidazolium iodide in dry acetonitrile as redox electrolyte. In comparison with its analogue NKX-2586 (Langmuir 2004, 20, 4205), NKX-2753 with an extra side ring on the alkene chain produced much higher IPCE values at the same conditions. The side ring acted as a spacer to efficiently prevent dye aggregation when adsorbed on the TiO2 surface, resulting in significant improvements of short-circuit photocurrent, open-circuit photovoltage, and fill factor compared with NKX-2586 that aggregated on the TiO2 surface.     

Epitaxial Growth of Sr x Ba1 − x Nb2O6 Thin Films Prepared from Sol-Gel Process

In this study, we prepared Sr _x Ba_{1 – x} Nb₂O₆ (x = 0.3, 0.5 and 0.7) thin film on 0.75 wt% La doped SrTiO₃ (100) and (110) single crystal substrates. A homogeneous coating solution was prepared with Sr and Ba acetates and Nb(OEt)₅ as raw materials, and acetic acid and diethlene glycol monomethyl ether as solvents. The substrates were coated with the solution by spin coating method. As-coated thin films were heated from 973 to 1273 K in air. The grains of the thin film on La doped SrTiO₃ (100) were pillar shaped and arranged in right angle to each other. On the other hand, the grains of these thin films on La doped SrTiO₃ were pillar shape and arranged in one direction. The crystallographic relationship of the thin film between Sr _x Ba_{1 – x} Nb₂O₆ and substrate that the 130 and 310 direction of the thin film on the substrate were oriented with c-axis in parallel to the substrate surface. On the other hand, (hk0) phase diffractions of Sr _x Ba_{1 – x} Nb₂O₆ thin film on the substrate (110) were investigated in the XRD theta-2theta measurement. It is expected that the Sr _x Ba_{1 – x} Nb₂O₆ (x = 0.3, 0.5 and 0.7) were highly oriented or epitaxial growing on La doped SrTiO₃ (110) single crystal substrate.     

Synthesis of Indolones via Radical Cyclization of N‐(2‐Halogenoalkanoyl)‐Substituted Anilines

The radical reactions of N‐(2‐halogenoalkanoyl)‐substituted anilines (anilides) of type 1 have been investigated under various conditions. Treatment of compounds 1a – 1o with Bu₃SnH in the presence of (2,2′‐azobis(isobutyronitrile) (AIBN) afforded a mixture of the indolones (oxindoles) 2a – 2o and the reduction products 5a – 5o (Table 1). In contrast, the N‐unsubstituted anilides 1p – 1s, 1u , and 1v gave the corresponding reduction products exclusively (Table 1). Similar results were obtained by treatment of 1 with Ni powder (Table 2) or wth Et₃B (Table 3). Anilides with longer N‐(phenylalkyl) chains such as 6 and 7 were inert towards radical cyclization, with the exception of N‐benzyl‐2‐bromo‐N,2‐dimethylpropanamide ( 6b ), which, upon treatment with Ni powder in i‐PrOH, afforded the cyclized product 9b in low yield (Table 4). Upon irradiation, the extended anilides 6, 7, 10 , and 11 yielded the corresponding dehydrobromination products exclusively (Table 5).