氯化钠团簇的形成规律与结合能计算

当离子蒸气冷凝形成团簇时，其结构表现出特定的规律。文中对不同大小不同形状的氯化钠团簇结构与结合能进行了计算，以求揭示离子蒸气冷凝形成团簇的一些规律，并与实验结果进行对照。     

圆波导TM01-矩形波导TE10模式转换器

设计了一种高功率圆波导TM01-矩形波导TM10模式转换器,可以实现圆波导TM01模式与矩形波导TM10模式之间的相互转换。仿真结果表明：中心频率为9.7 GHz时该模式转换器转换效率大于99.99%,回波损耗小于-40 dB,转换效率大于90%时的带宽大于0.4 GHz。调节底面短路圆波导长度可以实现模式转换器在9.2~10.1 GHz范围内调谐(模式转换效率大于99%)。在圆波导和耦合段连接处引入倒角可有效降低场强,提高功率容量,注入功率0.7 GW,其表面场强小于1 MV/cm。     

重氢原子进入钛晶体中引起的晶体结构转变与电解重水过程中“过热”现象的关系

对重氢原子进入钯或钛晶体中可能引起常温核聚变的机理探讨与实验研究结果，已在文献［１］中作了报导。后来又对钛阴极材料，在使用前后进行了Ｘ射线结构分析。发现在电解过程中发生过“过热”现象的钛阴极材料的晶体结构由原来的密排六方结构转变为立方结构，而没有发生“过热”现象的钛阴极材料的晶体仍然保持电解前的密排六方结构     

Instrumentation of coherent X-ray imaging and the primary experimental results

Coherent X-ray microscopy has advanced towards higher-energy, more brilliant sources over the past decade since its demonstrations, and many advancements have been made towards optimizing this imaging technique. Here we present both the experimental instrument for obtaining diffraction patterns and the primary reconstruction of yeast cell 2D projection. In addition, the characteristics of the existing optics at BL29XUL of SPring-8 Facility and the method of image reconstruction are discussed.     

La_(0.5)M_(0.5)MnO_3(M=Sr,Ba)的水热合成与表征

我们用水热法合成了钙钛矿锰氧化物La0.5M0.5MnO3(M=Sr,Ba)系列样品,研究了制备条件对结构、形貌和磁性的影响.     

VCSEL with reticular electrode and larger emitting aperture and its optoelectronic characteristics

The enlargement of the emitting aperture is usually one of the important methods of increasing vertical- cavity surface-emitting laser （VCSEL） optical output power. However, in a VCSEL with a larger aperture, the inhomogeneity in the injected current often causes inhomogeneous or even no emission. To solve this problem and to increase VCSEL output power, as well as to improve its thermal characteristics, we develop a new type of injected VCSEL with a larger aperture and a reticular electrode, where the conventional circular injection electrode of the P side is turned into a reticular one, and the heat sink is on the N side. The tests of the new VCSEL show an improvement in homogeneity in not only the injected current but also the emission intensity. The optical output power is also considerably increased, and the device optoelectronic performance is improved.     

Accumulation effect of SiO_2 protective layer on multi-shot laser-induced damage in high-reflectivity HfO_2/SiO_2 coatings

The accumulation effects in high-reflectivity(HR) HfO2/SiO2 coatings under laser irradiation are investigated.The HR HfO2/SiO2 coatings are prepared by electron beam evaporation at 1 064 nm.The laser-induced damage threshold(LIDT) are measured at 1 064 nm and at a pulse duration of 12 ns,in 1-on-1 and S-on-1 modes.Multi-shot LIDT is lower than single-shot LIDT.The laser-induced and native defects play an important role in the multi-shot mode.A correlative theory model based on critical conduction band electron density is constructed to elucidate the experimental phenomena.     

Study on induced radioactivity of China Spallation Neutron Source

China Spallation Neutron Source (CSNS) is the first High Energy Intense Proton Accelerator planned to be constructed in China during the State Eleventh Five-Year Plan period, whose induced radioactivity is very important for occupational disease hazard assessment and environmental impact assessment. Adopting the FLUKA code, the authors have constructed a cylinder-tunnel geometric model and a line-source sampling physical model, deduced proper formulas to calculate air activation, and analyzed various issues with regard to the activation of different tunnel parts. The results show that the environmental impact resulting from induced activation is negligible, whereas the residual radiation in the tunnels has a great influence on maintenance personnel, so strict measures should be adopted.     

A study of the active thermal control for the high energy detector on the HXMT

A thermal control system (TCS) based on the resistance heating method is designed for the High Energy Detector (HED) on the Hard X-ray Modulation Telescope (HXMT). The ground-based experiments of the active thermal control for the HED with the TCS are performed in the ambient temperature range from -15 to 20 ℃ by utilizing the pulse width to monitor the interior temperature of a NaI(Tl) crystal. Experimental results show that the NaI(Tl) crystal's interior temperature is from 17.4 to 21.7 ℃ when the temperature of the PMT shell is controlled within (20±3) ℃ with the TCS in the interesting temperature range, and the energy resolution of the HED is maintained at 16.2% @ 122 keV, only a little worse than that of 16.0% obtained at 20 ℃. The average power consumption of the TCS for the HED with a low-emissivity shell is about 4.3 W, which is consistent with the simulation.     

Fast computation of observed cross section for ψ′ → PP decays

It has been conjectured that the relative phase between strong and electromagnetic amplitudes is universally -90° in charmonium decays. ψ′ decaying into a pseudoscalar pair provides a possibility to test this conjecture. However, the experimentally observed cross section for such a process is depicted by the two-fold integral, which takes into account the initial state radiative (ISR) correction and energy spread effect. Using the generalized linear regression approach, a complex energy-dependent factor is ...