氯化钠团簇的形成规律与结合能计算

当离子蒸气冷凝形成团簇时，其结构表现出特定的规律。文中对不同大小不同形状的氯化钠团簇结构与结合能进行了计算，以求揭示离子蒸气冷凝形成团簇的一些规律，并与实验结果进行对照。     

氧化锰团簇粒子在有序多孔氧化锆孔道中的组装及其特殊性能研究

利用醇溶液浸渍法及后续的热处理工艺成功实现了氧化锰团簇粒子在有序多孔氧化锆孔道中的组装，借助XRD，TEM，UV-vis，EPR以及O~2-TPD等分析手段进行样品结构表征及性能分析。研究表明，氧化锰团簇粒子能比较均匀地分散于规则的孔道中；团簇粒子的生长随着热处理温度的提高受到孔道大小的限制；孔道中的氧化锰团簇粒子能显示出与较大尺寸氧化锰粒子完全不同的强顺磁信号，并且还具有优异的表面氧吸附特性。     

重氢原子进入钛晶体中引起的晶体结构转变与电解重水过程中“过热”现象的关系

对重氢原子进入钯或钛晶体中可能引起常温核聚变的机理探讨与实验研究结果，已在文献［１］中作了报导。后来又对钛阴极材料，在使用前后进行了Ｘ射线结构分析。发现在电解过程中发生过“过热”现象的钛阴极材料的晶体结构由原来的密排六方结构转变为立方结构，而没有发生“过热”现象的钛阴极材料的晶体仍然保持电解前的密排六方结构     

Instrumentation of coherent X-ray imaging and the primary experimental results

Coherent X-ray microscopy has advanced towards higher-energy, more brilliant sources over the past decade since its demonstrations, and many advancements have been made towards optimizing this imaging technique. Here we present both the experimental instrument for obtaining diffraction patterns and the primary reconstruction of yeast cell 2D projection. In addition, the characteristics of the existing optics at BL29XUL of SPring-8 Facility and the method of image reconstruction are discussed.     

La_(0.5)M_(0.5)MnO_3(M=Sr,Ba)的水热合成与表征

我们用水热法合成了钙钛矿锰氧化物La0.5M0.5MnO3(M=Sr,Ba)系列样品,研究了制备条件对结构、形貌和磁性的影响.     

Aspect-ratio dependent oscillatory thermocapillary convection in the floating half zone

The dependency of the critical Marangoni number on the geometrical aspect ratio of the floating half zone is essential to predict the onset of oscillatory thermocapillary convection.The experimental studies in the microgravity conditions on floating half zones of several centimeters in diameter have predicted that the critical Marangoni number increases with the increasing aspect ratio,and the terrestrial experimental studies have predicted the contradictory conclusion for floating half zones of several mil...     

VCSEL with reticular electrode and larger emitting aperture and its optoelectronic characteristics

The enlargement of the emitting aperture is usually one of the important methods of increasing vertical- cavity surface-emitting laser （VCSEL） optical output power. However, in a VCSEL with a larger aperture, the inhomogeneity in the injected current often causes inhomogeneous or even no emission. To solve this problem and to increase VCSEL output power, as well as to improve its thermal characteristics, we develop a new type of injected VCSEL with a larger aperture and a reticular electrode, where the conventional circular injection electrode of the P side is turned into a reticular one, and the heat sink is on the N side. The tests of the new VCSEL show an improvement in homogeneity in not only the injected current but also the emission intensity. The optical output power is also considerably increased, and the device optoelectronic performance is improved.     

Non-Gravitational Effects with Density-Matching in Evaluating the Influence of Sedimentation on Colloidal Coagulation

The method of density matching between the solid and liquid phases is often adopted to effectively eliminate the effect of sedimentation of suspensions in studies on dynamic behaviour of a colloidal system. However, the associated changes in the solvent composition may bring side effects to the properties investigated and therefore might lead to a faulty conclusion if the relevant correction is not made. To illustrate the importance of this side effect, we present an example of the sedimentation influence on the coagulation rate of suspensions of 2μm （diameter） polystyrene. The liquid mixtures, in the proper proportions of water （H2O）, deuterium oxide （D2O） and methanol （MeOH） as the liquid phase, density-matched and unmatched experiments are performed. Besides the influence of viscosity, the presence of methanol in solvent media, used to enhance the sedimentation effect, causes significant changes （reduction） in rapid coagulation rates compared to that in pure water. Without the relevant corrections for those non-gravitational factors it seems that gravitational sedimentation would retard the coagulation. The magnitude of the contribution from the non-gravitational factor is quantitatively determined, making the relevant correction possible. After necessary the influence of the sedimentation on coagulation rates at corrections for all factors, our experiments show that the initial stage of the coagulation is not observable.