Pyrolysis of acrylonitrile-methacrylic acid copolymers and derivatives

Pyrolyses of acrylonitrile-methacrylic acid copolymers and their sodium salts were studied under inert atmosphere at various heating rates using thermogravimetric analysis coupled with gas liquid chromatography, thermal volatilization analysis, differential scanning calorimetry and flash pyrolysis coupled with GLC and eventually mass spectrometric analysis. The mechanisms of the nitrile oligomerization and subsequent chain scission, giving rise to volatilization, are discussed in connection with the sequence distribution of monomeric units in the copolymers.     

Long-range flow-induced alignment of self-assembled rosette nanotubes on Si/SiOx and poly(methyl methacrylate)-coated Si/SiOx

Helical rosette nanotubes are obtained through the self-assembly of low molecular weight synthetic modules in water. Here we demonstrate that despite their dynamic nature, these materials respond very well to directional fluid flow and assume long-range order on flat substrates. Persistence length, order, and packing of the rosette nanotubes were found to depend dramatically on the surface properties of both the substrate and the nanotubes and vary from well-ordered long-range 2D films to bundled nanotubes or amorphous conglomerates. While flow-induced long-range alignment of dynamic nanostructures is unprecedented, the chemical tunability of the rosette nanotubes is anticipated to offer a versatile means for investigating the basis of interfacial forces in self-assembled organo-silicon devices and their effect on the stability and physical properties of organic nanostructures on electroactive surfaces.     

Preparation and degradation of copolymers of methyl methacrylate with alkali metal methacrylates—IV. The relationship of product yields to sequence distribution

Experimental yields of methanol and methyl methacrylate (MMA), produced in degradation to 500° of copolymers of MMA with lithium, sodium and potassium methacrylates (KMA) respectively, have been compared with the amounts expected on the basis of composition and sequence distribution. Rates of formation of these products under isothermal conditions have also been measured and activation energies for MMA formation at various compositions in the KMA-MMA copolymer series have been evaluated. The activation energy changes from 35 ± 5 kcal mole^?1 in PMMA to 52 ± 5 kcal mole^?1 in a 75 mole% KMA copolymer, indicating increasing difficulty in depolymerization to MMA as the MMA sequences become shorter. The primary route to methanol is by a cyclization involving adjacent ester and salt units in the chain, giving anhydride rings and metal methoxide as the initial products. Methanol yields and the positions of the maxima in the yield vs copolymer composition curves, however, are found to be inconsistent with those predicted from sequence distribution calculations. It is argued that water retained by the copolymers plays a key part in the reaction scheme by converting the metal methoxide to methanol and hydroxide; the latter then causes conversion of ester groups to salt units, so permitting further cyclization in copolymers initially rich in MMA. Mechanisms are discussed in detail.     

The assay of pterostilbene in spiked matrices by liquid chromatography tandem mass spectrometry and isotope dilution method

Pterostilbene (trans‐3,5‐dimethoxy‐4‐hydroxystilbene) is an active component found in several plant species, exhibiting important pharmacological properties. A new and reliable method of assaying this phyto compound in various matrices is presented; the assay is based on (1) the selectivity of liquid chromatography (LC) hyphenated with electrospray ionisation (ESI), (2) the specificity of a two‐step mass spectrometric analysis (MS/MS) and (3) the accuracy of the isotope dilution method. The labelled analogue may be conveniently synthesised in a few steps. The sensitivity of the method is confirmed by the very low limit of detection (LOD) and limit of quantitation (LOQ) values achieved in the assay of pterostilbene in two distinct fortified matrices, and is further supported by the observed accuracy values. Copyright © 2010 John Wiley & Sons, Ltd.     

Phosphorylated cellulose for water purification: a promising material with outstanding adsorption capacity towards methylene blue

Cellulose - Enhancing the sorption properties of cellulose is a prerequisite for its efficient use in water purification as an alternative to costly activated carbon. Here, solvent-free...     

Single‐Crystal‐like Nanoporous Spinel Oxides: A Strategy for Synthesis of Nanoporous Metal Oxides Utilizing Metal‐Cyanide Hybrid Coordination Polymers

Development of a new method to synthesize nanoporous metal oxides with highly crystallized frameworks is of great interest because of their wide use in practical applications. Here we demonstrate a thermal decomposition of metal‐cyanide hybrid coordination polymers (CPs) to prepare nanoporous metal oxides. During the thermal treatment, the organic units (carbon and nitrogen) are completely removed, and only metal contents are retained to prepare nanoporous metal oxides. The original nanocube shapes are well‐retained even after the thermal treatment. When both Fe and Co atoms are contained in the precursors, nanoporous Fe?Co oxide with a highly oriented crystalline framework is obtained. On the other hand, when nanoporous Co oxide and Fe oxide are obtained from Co‐ and Fe‐contacting precursors, their frameworks are amorphous and/or poorly crystallized. Single‐crystal‐like nanoporous Fe?Co oxide shows a stable magnetic property at room temperature compared to poly‐crystalline metal oxides. We further extend this concept to prepare nanoporous metal oxides with hollow interiors. Core‐shell heterostructures consisting of different metal‐cyanide hybrid CPs are prepared first. Then the cores are dissolved by chemical etching using a hydrochloric acid solution (i.e., the cores are used as sacrificial templates), leading to the formation of hollow interiors in the nanocubes. These hollow nanocubes are also successfully converted to nanoporous metal oxides with hollow interiors by thermal treatment. The present approach is entirely different from the surfactant‐templating approaches that traditionally have been utilized for the preparation of mesoporous metal oxides. We believe the present work proves a new way to synthesize nanoporous metal oxides with controlled crystalline frameworks and architectures.     

Dielectric Properties of Colossal-Dielectric-Constant Na1/2La1/2Cu3Ti4O12 Ceramics Prepared by Spark Plasma Sintering

In the current study, we report on the dielectric behavior of colossal-dielectric-constant Na_1/2La_1/2Cu₃Ti₄O₁₂ (NLCTO) ceramics prepared by mechanochemical synthesis and spark plasma sintering (SPS) at 850 °C, 900 °C, and 925 °C for 10 min. X-ray powder diffraction analysis showed that all the ceramics have a cubic phase. Scanning electron microscope observations revealed an increase in the average grain size from 175 to 300 nm with an increase in the sintering temperature. SPS NLCTO ceramics showed a room-temperature colossal dielectric constant (>10³) and a comparatively high dielectric loss (>0.1) over most of the studied frequency range (1 Hz–40 MHz). Two relaxation peaks were observed in the spectra of the electrical modulus and attributed to the response of grain and grain boundary. According to the Nyquist plots of complex impedance, the SPS NLCTO ceramics have semiconductor grains surrounded by electrically resistive grain boundaries. The colossal dielectric constant of SPS NLCTO ceramics was attributed to the internal barrier layer capacitance (IBLC) effect. The high dielectric loss is thought to be due to the low resistivity of the grain boundary of SPS NLCTO.