Stability and bifurcations in oscillations of composite laminates with curvilinear fibres under a supersonic airflow

Nonlinear Dynamics - Nonlinear flutter of variable stiffness composite plates—using a reduced-order model benefiting from a large-enough number of modes or degrees of freedom—is the...     

Sorption Behaviour of Molybdenum on Different Antimonates Ion Exchangers

Various antimonate compounds are well known as important inorganic ion exchangers, since they resist radiation and chemical degradation and also exhibit selectivities towards different cations. Ceric, silicon, titanium and ferric antimonates were prepared as inorganic ion exchangers. Characterization of these materials has been described using different techniques, including thermal analysis, surface area measurements, X-ray diffraction and IR-spectroscopy. In batch distribution experiments the influence of HNO₃ molarity and Mo concentration for Mo sorption on different matrices is described in terms of their retention capacities and distribution coefficients.The selectivities of these exchangers towards molybdenum are in the order: CeSb > SiSb > FeSb > TiSb.     

On the Embedding of Ordered Semigroups into Ordered Group

It was shown in [7] that any right reversible, cancellative ordered semigroup can be embedded into an ordered group and as a consequence, it was shown that a commutative ordered semigroup can be embedded into an ordered group if and only if it is cancellative. In this paper we introduce the concept of L-maher and R-maher semigroups and use a technique similar to that used in [7] to show that any left reversible cancellative ordered L or R-maher semigroup can be embedded into an ordered group.     

Decay of neutron-rich Ga isotopes near N = 50 at PARRNe

The PARRNe facility has been used to produce neutron-rich isotopes ^83,84Gaby the ISOL method. Their decay has been studied, and β-γ coincidence and γ-γ coincidence data were collected as a function of time. The first two excited levels in ⁸³Ge and the first excited level in ⁸⁴Ge have been measured for the first time.     

Stemmosides C and D, two novel unusual pregnane glycosides from Solenostemma argel: structural elucidation and configurational study by a combined NMR-quantum mechanical strategy

Stemmosides C and D, two novel pregnane glycosides characterized by an unusual C-17 side chain were isolated from the pericarps of Solenostemma argel. In addition, stemmoside D displays an uncommon 14β proton configuration, apparently being the first pregnane isolated from plants known to have a 15 keto, cis CD ring junction. Their structures have been established by ESIMS and NMR experiments. The relative configuration of the molecules was determined using a strategy based on the simulation of ¹H, ¹³C, and J coupling NMR parameters. DFT calculations of ¹H and ¹³C chemical shifts, and of the ¹H homonuclear spin–spin coupling constants were performed with the mPW1PW91 functional using the 6-31G(d,p) basis set on the fully optimized geometries of all the possible stereoisomers.     

Synthesis,characterization, and biological activity of [2‐oxo‐2‐(4‐acetyl) phenyl amino] ethylene methacrylate and its derivatives

A new type of methacrylate monomer, [2‐oxo‐2‐(4‐acetyl) phenyl amino] ethylene methacrylate (APEMA), was synthesized. The oxime, 2,4‐dinitrophenylhydrazone, and thiosemicarbazone derivatives of poly{[2‐oxo‐2‐(4‐acetyl) phenyl amino] ethylene methacrylate} [poly(APEMA)] were prepared with hydroxylamine hydrochloride, 2,4‐dinitrophenylhydrazine, and thiosemicarbazone hydrochloride, respectively. The radical homopolymerization of APEMA was performed at 65 °C in a 1,4‐dioxane solution with benzoyl peroxide as an initiator. The monomer and its homopolymer were characterized with Fourier transform infrared and NMR techniques. The thermal stabilities of poly(APEMA) and its derivatives were investigated with thermogravimetric analysis and differential scanning calorimetry. The ultraviolet stability of the polymers were compared. The solubility and inherent viscosity of the polymers were also determined. The number‐average and weight‐average molecular weights and polydispersity index of the polymers were determined with gel permeation chromatography. The antibacterial and antifungal effects of the monomer and the polymer and its derivatives were also investigated on various bacteria and fungi. The activation energies of the thermal degradation of the polymers were calculated with the Ozawa method. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3157–3169, 2004     

Rail vs truck transport of biomass

This study analyzes the economics of transshipping biomass from truck to train in a North American setting. Transshipment will only be economic when the cost per unit distance of a second transportation mode is less than the original mode. There is an optimum number of transshipment terminals which is related to biomass yield. Transshipment incurs incremental fixed costs, and hence there is a minimum shipping distance for rail transport above which lower costs/km offset the incremental fixed costs. For transport by dedicated unit train with an optimum number of terminals, the minimum economic rail shipping distance for straw is 170 km, and for boreal forest harvest residue wood chips is 145 km. The minimum economic shipping distance for straw exceeds the biomass draw distance for economically sized centrally located power plants, and hence the prospects for rail transport are limited to cases in which traffic congestion from truck transport would otherwise preclude project development. Ideally, wood chip transport costs would be lowered by rail transshipment for an economically sized centrally located power plant, but in a specific case in Alberta, Canada, the layout of existing rail lines precludes a centrally located plant supplied by rail, whereas a more versatile road system enables it by truck. Hence for wood chips as well as straw the economic incentive for rail transport to centrally located processing plants is limited. Rail transshipment may still be preferred in cases in which road congestion precludes truck delivery, for example as result of community objections.     

A computational strategy for multiscale systems with applications to Lorenz 96 model

Numerical schemes for systems with multiple spatio-temporal scales are investigated. The multiscale schemes use asymptotic results for this type of systems which guarantee the existence of an effective dynamics for some suitably defined modes varying slowly on the largest scales. The multiscale schemes are analyzed in general, then illustrated on a specific example of a moderately large deterministic system displaying chaotic behavior due to Lorenz. Issues like consistency, accuracy, and efficiency are discussed in detail. The role of possible hidden slow variables as well as additional effects arising on the diffusive time-scale are also investigated. As a byproduct we obtain a rather complete characterization of the effective dynamics in Lorenz model.     

A solution procedure for the discrete time, cost and quality tradeoff problem using electromagnetic scatter search

Decisions concerning a project’s expedition, traditionally involved considerations regarding time and cost tradeoff. It was recently suggested that the quality of a project should also be taken into considerations. In this paper, we propose a meta-heuristic solution procedure for the discrete time, cost and quality tradeoff problem. This problem involves the scheduling of project activities in order to minimize the total cost of the project while maximizing the quality of the project and also meeting a given deadline. We apply a so called electromagnetic scatter search to solve this problem. In this process, we initially generate a population of feasible solutions. In so doing, we use frequency memory to well sample the feasible region. A number of these solutions are then selected and improved locally. The improved solutions are then combined to generate new set of solutions. The combination process utilizes attraction–repulsion mechanisms borrowed from the electromagnetism theory. The whole process is stopped when no significant improvement in the set of solutions are observed. The validity of the proposed solution procedure is demonstrated, and its applicability is tested on a randomly generated large and complex problem having 19,900 activities.     

Some characterisations of supported algebras

We give several equivalent characterisations of left (and hence, by duality, also of right) supported algebras. These characterisations are in terms of properties of the left and the right parts of the module category, or in terms of the classes L₀ and R₀ which consist respectively of the predecessors of the projective modules, and of the successors of the injective modules.