A simple flow injection-reduced volume column system for hemoglobin typing

A flow injection (FI)-reduced volume column system was developed for hemoglobin (Hb) typing to be used as an initial screening method for thalassemia. The column was packed with 140 μl diethylaminoethyl (DEAE)-Sephadex A-50 ion exchange beads. Hb can be separated using Tris–HCl buffer solution with pH gradient 8.5–6.5 and then monitored spectrophotometrically at 415 nm. The hemolysate of 40 blood samples from packed red cells were screened for thalassemia by determining the amount of HbA₂ and HbE present. The proposed system was able to predict positive test results from those samples with β, E-trait and EE homozygous thalassemia, Hb types that were independently identified following the conventional method at the hospital laboratory. Advantages of the proposed system over the conventional column technique include low amount of reagents and blood sample needed, short analysis time and low cost. Each analysis required only 80 μl of 50 times diluted packed cells, which is equivalent to 1.6 μl undiluted packed cells, and it can be completed in only 35 min. This simple FI-reduced volume column system was demonstrated to be an economic alternative system for Hb typing to initially screen some types of thalassemia such as β-trait, E-trait and EE-homozygous which are commonly found in Thailand.     

Flow Injection/Sequential Injection Chromatography: A Review of Recent Developments in Low Pressure with High Performance Chemical Separation

This review focuses on the developments of the various parts of instrumentation and the operation of low to medium pressure flow injection and sequential injection chromatography (FIC and SIC) systems. The report and discussion include solution delivery system, separation column, flow cell and detector, mobile phase management, and online sample pretreatment. Applications of FIC and SIC and their differences as compared to HPLC are also presented.     

Determination of trace iron in beer using flow injection systems with in-valve column and bead injection

Three flow injection (FI) systems were investigated for the determination of trace iron in beer: an FI-in-valve column-flame atomic absorption spectrophotometry (FI-FAAS) system, a spectrophotometric FI system with a column placed at the detection point, and an FI-spectrophotometric system with bead injection (FI-BI). Cationic exchange resin Dowex 50W X8 and iminodiacetate chelating resin, Chelex-100, were employed for the FI-spectrophotometric and FI-FAAS systems, respectively. The FI-in-valve column, packed with the resin, enhances the FAAS performance. The spectrophotometric FI system with a column (packed with Chelex-100) placed at the detection point (in a cell holder of a spectrophotometer) is based on the formation of iron (II)–1,10-phenanthroline complex sorbed onto the resin. No eluent has been found to be suitable. The FI-BI for renewable microcolumn has been proven to be an alternative. The FI-FAAS and FI-BI procedures provide online sample preseparation and preconcentration for the determination of iron in beer. Both are simple, rapid, and economical. The procedures also involve sample preparation (decarbonation and suppression of tannin interference by adding ascorbic acid) and standard addition. The results obtained by FI-FAAS and FI-BI agree with those of AOAC spectrophotometric method.     

Flow based immuno/bioassay and trends in micro-immuno/biosensors

The term immuno/bioassay refers to analytical techniques that utilize the specific molecular recognition between antibodies and antigens or between biomolecules and specific receptors. Features such as high selectivity and low sample consumption make them very useful for analysis of samples with complex matrices. However, immuno/bioassays involve time-consuming (multi-step) operations which usually consist of steps of multiple incubation and washing. These are tedious and may result in large errors. Automatted immuno/bioassay systems can ease and shorten these processes and thus are highly beneficial. The hyphenation of flow-based techniques (i.e. flow injection related techniques and micro-fluidic systems) with immuno/bioassay protocols paves a new way for performing such assays. Compared to conventional micro-plate formats, flow-based immuno/bioassays can reduce the time needed for analysis, the volumes of samples and reagents consumed, and the need for trained personnel. In order to transform immuno/bioassays from conventional to flow-based formats, the solid surfaces used for the immobilization step has to be changed in order to meet the specific requirements of flow systems. To further develop the on-site analytical systems in micro-fluidic platforms, improvements in detection methods are necessary for high-sensitivity and rapid measurement. This review overviews the advantages and disadvantages of flow-based immuno/bioassay formats, the various types of solid surfaces for immobilization, and the methods of detection. Trends to improve sensitivity, speed and robustness are emphasized.     

Low-Pressure Chromatographic Separation of p-Hydroxybenzoates Using Sequential Injection with Lab-on-Valve System and Miniature Monolithic Column

The use of a small guard column (5-mm length) as a miniature analytical column in low-pressure liquid chromatography based on a sequential injection with lab-on-valve system was demonstrated. A strong initial mobile phase was used to rapidly deliver the sample zone to the column prior to simultaneous separation of analytes with weaker mobile phase. Separation of methyl-, ethyl-, propyl-, and butyl-4-hydroxybenzoates (MP, EP, PP, and BP) was achieved within about 120 s with sufficient peak resolution (all higher than 1.3) using 2,500 µL of mobile phase (composed of 1,087 µL of MeOH) per run. Detection limits were found to be 6.5, 8.0, 0.5, and 0.6 μmol L^?1 for MP, EP, PP, and BP, respectively. The system was tested with common commercially available skin lotions and wet wipe products. The analysis results were in good agreement with those obtained from the high-performance liquid chromatography with a 10-cm-length packed column.     

Two CdZnTe detector-equipped gamma-ray spectrometers for attribute measurements on irradiated nuclear fuel

Summary Some United States Department of Energy-owned spent fuel elements from foreign research reactors (FRRs) are presently being shipped from the reactor location to the US for storage at the Idaho National Engineering and Environmental Laboratory (INEEL). Two cadmium zinc telluride detector-based gamma-ray spectrometers have been developed to confirm the irradiation status of these fuels. One spectrometer is configured to operate underwater in the spent fuel pool of the shipping location, while the other is configured to interrogate elements on receipt in the dry transfer cell at the INEEL’s Interim Fuel Storage Facility (IFSF) Both units have been operationally tested at the INEEL.     

Extractionsapparate

Ohne Zusammenfassung     

Gamma-ray spectrometry combined with acceptable knowledge (GSAK): A technique for characterization of certain remote-handled transuranic (RH-TRU) wastes

Summary Gamma-ray spectrometry combined with acceptable knowledge (GSAK) is a technique for the characterization of certain remote-handled transuranic (RH-TRU) wastes. GSAK uses gamma-ray spectrometry to quantify a portion of the fission product inventory of RH-TRU wastes. These fission product results are then coupled with calculated inventories derived from acceptable process knowledge to characterize the radionuclide content of the assayed wastes. GSAK has been evaluated and tested through several test exercises. This paper describes these tests and their results; while the former paper in this issue presents the methodology, equipment and techniques.     

Review on screening and analysis techniques for hemoglobin variants and thalassemia

Thalassemia involves gene mutation that causes the production of an insufficient amount of normal structure globin chains while Hb variant involves gene mutation that causes the change in type or number of amino acid of the globin chain. It has been reported that some 200 million people worldwide had hemoglobinopathies of some sort. Attempts to develop effective and economical techniques for screening and analysis of thalassemia and Hb variants have become very important. In this review, we report the different techniques available, ranging from initial screening to extensive analysis, comparing advantages and disadvantages. Some indirect studies related to thalassemia indication and treatment follow-up are also included. We hope that information on these various techniques would be useful for some scientists who are working on development of a new technique or improving the existing ones.