Experimental designs and response surface modeling applied for the optimization of metal-cyanide complexes analysis by capillary electrophoresis

The development of capillary zone electrophoresis (CZE) methods for the determination of metal cyanide complexes in real samples showed some problems, such as the low detection signal of Au (CN)2- and the low resolution between Ni(II) and Fe(II) cyanides in gold processing solutions, and the lack of separation of Pt(CN)4(2-) and Pd(CN)4(2-) in the leachates from automobile catalytic converters. To optimize some analytical parameters, the present study thus focused on the application of experimental designs and multiregression models. The following factors were examined by a two-level factorial design: applied voltage, injection time, detection wavelength, buffer ion, ionic strength and buffer modifiers. For optimization of the CZE method, subsequent response-surface experiments with the important factors were made with the two kinds of leaching solutions. Optimal analytical conditions were obtained in each case, giving good detection signals and resolution for the components of the studied leachates.     

ITSTUDIES ON THE EFFECT OF UREA ON THE COMPATIBILITY OF PMMA/PVC MIXTURES IN DMF BY A DILUTE- SOLUTION VISCOMETRY METHOD

The interaction between poly(methymethacrylate) (PMMA) and poly(vinyl chloride) (PVC) has been studied indilute urea solutions of dimethylformamide (DMF) at 28℃ using a dilute solution viscometry method. The results show thatthe polymer mixtures are compatible in DMF solution in the absence of urea. The influence of urea addition on the degree ofcompatibility of the polymer mixtures has been studied in terms of the compatibility parameters (△b_m and △[η]_m). It wasfound that the compatibility of the polymer mixtures is decreased with increasing urea addition, passing through a minimumat 0.5 M urea.     

Organoaluminum–cyclic ether-cyclic imide catalysts for the polymerization of epoxides

A catalyst for the polymerization of epoxides consisting of trialkylaluminums, cyclic ethers, and cyclic imides has been investigated. Various catalyst components were examined to reveal that the combination of triisobutylaluminum, dioxane, and succinimide gives the most active catalyst. The catalytic activity is greatly enhanced with aging in which the change in color from pale yellow to dark red takes place. The polymerization data show that the dioxane provides a pathway for the catalyst components to form an active species. The dioxane-containing catalyst is likely to be different in structure from that of the dioxane-free catalyst. It was shown that the catalyst solution is electrically conductive. A parallel correlation seems to exist between the electrical conductivity and the catalytic activity, suggesting that the catalytic species may be of an ionic character.     

(Eta5-pentamethylcyclopentadienyl)rhodium and -iridium complexes with weakly and strongly coordinating anions: isolation and first X-ray molecular structures of the tris(solvent) complexes [(C5Me5)M(acetone)2(H2O)][BF4]2 (M = Rh, Ir)

Several novel pentamethylcyclopentadienyl complexes of general formula [(C5Me5)IrL3][BF4]2 were prepared including the tris(solvent) precursors [(C5Me5)M(acetone)2(H2O)][BF4]2 (M = Rh, Ir) (1a,b). The X-ray molecular structures of 1a,b were determined at low temperature. Complexes 1a,b are isostructural, and both compounds crystallize in the monoclinic space group P2(1)/c with a = 10.157(3) A, b = 14.038(9) A, c = 16.335(2) A, beta = 99.73(2) degrees, and Z = 4 for 1a and with a = 10.107(9) A, b = 13.994(16) A, c = 15.996(34) A, beta = 99.61(12) degrees, and Z = 4 for 1b. The coordinated water molecule is hydrogen bonded to both BF4(-) anions. Reaction of 1a,b with pyridine (py) afforded the related tris(pyridine) complexes [(C5Me5)M(eta1-(N)-py)3][BF4]2 (M = Rh, Ir) (2a,b). Complex 2b was characterized by X-ray crystallography, monoclinic space group P2(1)/c with a = 8.665(3) A, b = 19.687(7) A, c = 18.408(5) A, beta = 94.17(3) degrees, and Z = 4. Moreover, we prepared the novel neutral compounds (C5Me5)M(eta2-NO3)(eta1-NO3) (M = Rh, Ir) (4a,b) where the anions are bonded to the metal center instead of a coordinating solvent as confirmed by X-ray study on the iridium complex 4b. The latter crystallizes in the orthorhombic space group Pcab with a = 13.032(4) A, b = 14.370(11) A, c = 14.839(18) A, and Z = 8.     

Some novel layered-silicate nanocomposites based on a biodegradable hydroxybutyrate copolymer

This paper describes the preparation, characterization, mechanical properties and thermal stability of layered silicate nanocomposites based on poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHB-co-PHH, known as Nodax^TM). The dispersed phases were organically modified montmorillonites (clay 20A and clay 25A), mica, and talc, and they were introduced by solution mixing. Wide-angle X-ray scattering results and transmission electron microscopy (TEM) images confirmed that these two clays were intercalated and finely distributed in the Nodax^TM matrix. This type of layered filler led to remarkable improvements in mechanical properties even at very low loadings. Minimizing aggregation was more of a problem in the case of the mica and the talc, at least in this particular matrix. In some cases, these layered fillers slightly decreased the thermal stability of the Nodax^TM.     

HETEROCYCLIZATION OF AMINOTHIAZOLES

Several new 2-arylidinoamino-4-(3-coumaryl)thiazole derivatives were synthesized via the reaction of 2-amino-4-(coumaryl)thiazole with aromatic aldehydes and other reagents. Structural elucidations were based on elementary analysis and spectral data studies.     

Fabrication of 3D electrospun structures from poly(lactide‐co‐glycolide acid)–nano‐hydroxyapatite composites

The fabrication of three‐dimensional (3D) electrospun composite scaffolds was presented in this study. Layers of electrospun meshes made from composites of poly(lactide‐co‐glycolide acid) (PLGA) and hydroxyapatite (HA) were stacked and sintered using pressurized gas. Three HA concentrations of 5, 10, and 20 wt % were tested, and the addition of the HA nanoparticles decreased the tensile mechanical properties of the meshes with 20 wt % HA. However, after the gas absorption process, the fibers within the mesh sintered, which improved the mechanical properties more than twofold. The fabrication of 3D, porous, electrospun scaffolds was also demonstrated. The resulting 3D scaffolds had open porosity of up to 70% and modulus of ～20 MPa. This technique improves on the current electrospinning technology by overcoming the challenges of depositing a thick, 3D structure. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

The Microbiome and Its Implications in Cancer Immunotherapy

Cancer is responsible for ~18 million deaths globally each year, representing a major cause of death. Several types of therapy strategies such as radiotherapy, chemotherapy and more recently immunotherapy, have been implemented in treating various types of cancer. Microbes have recently been found to be both directly and indirectly involved in cancer progression and regulation, and studies have provided novel and clear insights into the microbiome-mediated emergence of cancers. Scientists around the globe are striving hard to identify and characterize these microbes and the underlying mechanisms by which they promote or suppress various kinds of cancer. Microbes may influence immunotherapy by blocking various cell cycle checkpoints and the production of certain metabolites. Hence, there is an urgent need to better understand the role of these microbes in the promotion and suppression of cancer. The identification of microbes may help in the development of future diagnostic tools to cure cancers possibly associated with the microbiome. This review mainly focuses on various microbes and their association with different types of cancer, responses to immunotherapeutic modulation, physiological responses, and prebiotic and postbiotic effects.