Controlled/living polymerization of 2‐(diethylamino)ethyl methacrylate and its block copolymer with tert‐butyl methacrylate by atom transfer radical polymerization

Polymerization of 2‐(diethylamino)ethyl methacrylate (DEAEMA) via homogeneous atom transfer radical polymerization under various reaction conditions is described. The effects of the initiators and solvents were examined. With 1,1,4,7,10,10‐hexamethyl triethylenetetramine/copper(I) chloride/p‐toluenesulfonyl chloride as the ligand/catalyst/initiator system in methanol, poly(DEAEMA) with a polydispersity index as low as 1.07 was synthesized. Kinetic studies demonstrated the polymerization was very well controlled and exhibited the living characteristic of the process. Well‐defined block copolymers of DEAEMA and tert‐butyl methacrylate (tBMA) were successfully synthesized. The copolymers could be synthesized with equally good results by starting with either p(DEAEMA) or p(tBMA) as the macroinitiators. However, only the macroinitiators terminated with chlorine should be used. The corresponding macroinitiators with bromine as a transferable group did not yield well‐defined copolymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2688–2695, 2003     

Bioavailability Enhancement of Cepharanthine via Pulmonary Administration in Rats and Its Therapeutic Potential for Pulmonary Fibrosis Associated with COVID-19 Infection

Cepharanthine (CEP) has excellent anti-SARS-CoV-2 properties, indicating its favorable potential for COVID-19 treatment. However, its application is challenged by its poor dissolubility and oral bioavailability. The present study aimed to improve the bioavailability of CEP by optimizing its solubility and through a pulmonary delivery method, which improved its bioavailability by five times when compared to that through the oral delivery method (68.07% vs. 13.15%). An ultra-performance liquid chromatography tandem-mass spectrometry (UPLC-MS/MS) method for quantification of CEP in rat plasma was developed and validated to support the bioavailability and pharmacokinetic studies. In addition, pulmonary fibrosis was recognized as a sequela of COVID-19 infection, warranting further evaluation of the therapeutic potential of CEP on a rat lung fibrosis model. The antifibrotic effect was assessed by analysis of lung index and histopathological examination, detection of transforming growth factor (TGF)-β1, interleukin-6 (IL-6), α-smooth muscle actin (α-SMA), and hydroxyproline level in serum or lung tissues. Our data demonstrated that CEP could significantly alleviate bleomycin (BLM)-induced collagen accumulation and inflammation, thereby exerting protective effects against pulmonary fibrosis. Our results provide evidence supporting the hypothesis that pulmonary delivery CEP may be a promising therapy for pulmonary fibrosis associated with COVID-19 infection.     

磷酸盐、锗酸盐和碲酸盐玻璃中Ce3+、Tb3+、Er3+、Tm3+离子的发光和敏化作用的研究——Ⅰ.吸收光谱、荧光光谱和激发光谱

研究了在不同基质玻璃中Ce3+、Tb3+、Er3+和Tm3+离子的吸收、荧光和激发光谱,对发光强度进行了定量的测定。研究了玻璃基质的紫外吸收对发光的影响,并且讨论了无机玻璃的配位场与上述稀土离子的相互作用。     

准两腔振荡器的理论和实验研究

根据两腔振荡器和返波管的特点提出了准两腔振荡器，其作用机理是两腔振荡器的机理，结构类似返波管.这种结构主要由调制腔组和换能腔组两部分组成，调制腔组实现电子束速度调制，调制后的电子束在通过一个微波场较弱的区间时实现电子束群聚，然后在换能腔组实现电子能量到微波能量的转化，并通过输出结构输出；同时，调制腔组和换能腔组之间存在微波耦合，换能腔组中的一部分微波能量可以耦合到调制腔组，形成一个正反馈回路，在一定条件下实现微波振荡.根据此理论，根据Sinus-700加速器的参数(800 kV，10 kA)设计了一个X波段的高功率微波器件，2.5维Particle in Cell (PIC)程序模拟的效率为28%，微波频率为9.42GHz，微波输出功率为2.25GW，实验上得到的微波输出为微波频率9.40GHz，微波输出功率2.44GW. 关键词： 两腔振荡器 返波管 多波切仑可夫微波器件     

Cr3+在SrTiO3晶体中的晶场能级

由激发光谱及荧光光谱的测量,运用Tanabe-Sugano能量矩阵计算了Cr3+在SrTiO3晶体中的晶场能级.     

掺铬钛酸锶晶体的氧化还原诱导吸收及发光的退火效应和浓度效应

制备了纯的、掺0.005、0.01、0.2和0.5wt%Cr2O3的钛酸锶单晶.测量了不同退火条件下的室温透射光谱及6.5K以上的荧光光谱.对晶体的氧化和还原热处理诱导吸收及退火和掺杂浓度对晶体发光的影响进行了较为详细的研究.     

K9和石英玻璃基片上Au膜真空紫外反射特性研究

采用离子束溅射法,分别在经过不同前期清洗方法处理过的K9及石英玻璃光学基片上,选择不同的镀膜参量,镀制了多种厚度的Au膜。对镀制的Au膜在真空紫外波段较宽波长范围内的反射率进行了连续测量。测试结果表明:辅助离子源的使用方式、Au膜厚度对反射镜的反射率有重大影响。基片材料、镀前基片表面清洗工艺等对反射率也有一定影响。采用镀前离子轰击,可显著提高Au膜反射率及膜与基底的粘合力;获得最高反射率时的最佳膜厚与基片材料、镀膜工艺密切相关。对经过离子清洗的石英基片,膜厚在30 nm左右反射率最高;比较而言,石英基片可获得更高的反射率;辅助离子源的使用还显著影响获得最高反射率时对应的最佳膜厚值,且对K9基片的影响更显著。     

Polarisation characteristics of a 12 fibre coupler under femtosecond pulsed and continuous wave illumination

We report on the experimental investigation carried out in the polarisation characteristics of femtosecond pulsed and continuous wave beams propagating through a 1×2 fibre coupler. It is demonstrated that the polarisation states of pulsed and continuous wave illumination over the broad wavelength range can be preserved in a conventional fused fibre coupler. Furthermore, the fibre coupler acts as a low-pass spectral filter in the visible wavelength range with a splitting ratio between 99.6/0.4 and 99.7/0.3. The result is of importance for fibre-optic second harmonic generation microscopy which requires the polarisation preservation to extract molecular organization of a sample.