Quantum Windowed Fourier Transform and its Application to Quantum Signal Processing

International Journal of Theoretical Physics - In classical information processing, the windowed Fourier transform (WFT), or short-time Fourier transform, which is a variant of the Fourier...     

Identification of two polyamides (PA11 and PA1012) using pyrolysis-GC/MS and MALDI-TOF MS

The main goal of this work is to identify two polyamides (PA11 and PA1012) by mass spectrometry including pyrolysis-GC/MS and MALDI-TOF MS. PA11 and PA1012 have similar properties and cannot be distinguished by many other methods. Using pyrolysis-GC/MS, the pyrograms of PA11 and PA1012 at 600 °C were compared. Specific pyrolyzates for PA11 and PA1012 were obtained, 2-azacyclotridecanone for PA11 and 1,10-diaminodecane, 1,10-dicyanodecane for PA1012, respectively, which was the basis to distinguish them. Meanwhile, MALDI-TOF MS can give specific repeat unit for these two polyamides, dehydrated 11-aminoundecanoic acid (M = 183) for PA11, acetylate of dodecanedioic acid and diaminodecane (M = 366) for PA1012, which can be another means of identifying them.     

Fiber-optic curvature sensor with optimized sensitive zone

A novel fiber-optic sensor that can measure curvature directly has been developed previously. In this paper, the transduction of curvature to light intensity is described analytically by using the geometrical optics analysis. The mathematical model allows a quantitative optimization of the sensor without having to produce many sensors with slightly different combinations of parameters in order to accomplish a similar objective experimentally. The Monte Carlo simulation by ray tracing and an orthogonal matrix are used to optimize the fiber-optic sensor’s configuration. The results show that the depth of the sensitive zone and the number of teeth are two main parameters that affect the sensor’s sensitivity and the optimum number of teeth is 55, which is in agreement with the mathematical model.     

气相色谱-质谱法测定热塑性弹性体中的多环芳烃

建立了一种简单、准确的测定热塑性弹性体中16种多环芳烃(PAHs)的气相色谱-质谱(GC-MS)方法。考察了样品制备、萃取溶剂、萃取方法、时间以及温度对厂家制备的阳性热塑性弹性体样品中PAHs提取效率的影响,确定了萃取条件和方法。样品经甲苯超声萃取、浓缩后用环己烷溶解、二甲亚砜液液萃取净化后采用GC-MS进行分析,内标法定量。通过对不同材质阳性热塑性弹性体样品的加标回收、精密度试验等对建立的方法进行评价,16种PAHs的平均回收率为70%～117%,精密度为0.2%～10.8%。该方法适合于热塑性弹性体中PAHs的测定。     

The method eliminating nearfield effect for measurement sound absorption coefficient

The numerical simulation is used in this work to study the nearfieldradiation pressure of a piston projector,the smooth effect on the pressure fieldby using a“big”receiver and the influence of the nearfield and in the transitionregion on measurement of sound absorption coefficient.The result indicatesthat the big error would appear when using usual absorption coefficientmeasurement method.According to the reason causing the error,the methodeliminating nearfield effect (MENE) is proposed and some digital results aregiven for a/λ=3,9 and b=0,0.5a,a(a and b are the transducer and re-ceiver radii respectively).The calculation results show that the method not onlywidens measurement range in nearfield,but also gives accurate results.     

Light intensity modulation fiber-optic sensor for curvature measurement

A light intensity modulation fiber-optic sensor, which can measure curvature directly, has been developed. It is suitable for the measurement of thin, embedded or highly flexible structures. An experimental analysis on the static and dynamic characteristics of sensor has been undertaken. The results show that the output voltage has polarity and a good linear relationship with curvature when the curvature radius is larger than 60 mm. The mathematical model relating the relative output loss, parameters of sensitive zone’s configuration (depth, number, height and half angle of tooth) and bending radius is described analytically based on the geometric optics. Curvature fiber-optic sensors can be used to build a quasi-distributed fiber-optic sensor system, which can measure curvature and torsion angle simultaneously.     

First-principles calculation of pKa for cocaine, nicotine, neurotransmitters, and anilines in aqueous solution

The absolute pKa values of 24 representative amine compounds, including cocaine, nicotine, 10 neurotransmitters, and 12 anilines, in aqueous solution were calculated by performing first-principles electronic structure calculations that account for the solvent effects using four different solvation models, i.e., the surface and volume polarization for electrostatic interaction (SVPE) model, the standard polarizable continuum model (PCM), the integral equation formalism for the polarizable continuum model (IEFPCM), and the conductor-like screening solvation model (COSMO). Within the examined computational methods, the calculations using the SVPE model lead to the absolute pKa values with the smallest root-mean-square-deviation (rmsd) value (1.18). When the SVPE model was replaced by the PCM, IEFPCM, and COSMO, the rmsd value of the calculated absolute pKa values became 3.21, 2.72, and 3.08, respectively. All types of calculated pKa values linearly correlate with the experimental pKa values very well. With the empirical corrections using the linear correlation relationships, the theoretical pKa values are much closer to the corresponding experimental data and the rmsd values become 0.51-0.83. The smallest rmsd value (0.51) is also associated with the SVPE model. All of the results suggest that the first-principles electronic structure calculations using the SVPE model are a reliable approach to the pKa prediction for the amine compounds.     

高效液相色谱-串联质谱法同时测定人尿液中7种邻苯二甲酸酯代谢物

建立了同时检测人尿液中7种邻苯二甲酸酯代谢物的高效液相色谱-串联三重四极杆质谱法。尿液经酶水解后,采用萃取柱净化,以2%(v/v)甲酸甲醇溶液为洗脱剂,经苯基柱分离,以0.1%(v/v)乙酸水溶液和0.1%(v/v)乙酸乙腈溶液为流动相进行梯度洗脱,采用电喷雾离子源负离子模式和多反应监测模式采集信号,用同位素内标法进行定量分析。尿液中7种邻苯二甲酸酯代谢物在0.2~200.0 μg/L范围内定量离子的相对峰面积比值与质量浓度均呈良好线性关系(r≥0.99976);检出限(LOD)为13.43~80.21 ng/L,定量限为44.77~267.37 ng/L; 3个水平的加标回收率为88.8%~108.9%,日内和日间精密度均不大于17.05%。该方法可同时准确、灵敏、简便地测定人尿液中7种邻苯二甲酸酯代谢物的暴露水平。     

基于超高速相机的数字图像相关性全场应变分析在SHTB实验中的应用

基于超高速相机和数字图像相关性全场应变分析方法对传统的分离式Hopkinson拉杆(SHTB)实验系统进行改进,获得尼龙和铝合金材料的动态拉伸应力应变曲线,验证了数字图像相关性全场应变分析在SHTB实验中的有效性。实验结果显示:该方法测量的平均应变与应变片测量结果一致性很好, 而传统的SHTB实验原理计算的应变结果则明显偏大,需要对试件原始标距进行修正后才能获得有效的试件应变,并且在试件的材料和几何尺寸不变的条件下标距修正不依赖于应变率。基于数字图像相关性全场应变测量,讨论了应变均匀性问题:脆性的尼龙试件在标距范围内应变均匀性良好,而韧性的铝合金试件表现出比较严重的应变不均匀性,归因于颈缩变形的影响。     

A crosslinked colloidal network of peptide/nucleic base amphiphiles for targeted cancer cell encapsulation

The use of peptide amphiphiles (PAs) is becoming increasingly popular, not only because of their unique self-assembly properties but also due to the versatility of designs, allowing biological responsiveness, biocompatibility, and easy synthesis, which could potentially contribute to new drug design and disease treatment concepts. Oligonucleotides, another major functional bio-macromolecule class, have been introduced recently as new functional building blocks into PAs, further enriching the tools available for the fabrication of bio-functional PAs. Taking advantage of this, in the present work, two nucleic base-linked (adenine, A and thymine, T) RGD-rich peptide amphiphiles (NPAs) containing the fluorophores naphthalimide and rhodamine (Nph-A and Rh-T) were designed and synthesized. The two NPAs exhibit distinctive assembly behaviours with spherical (Rh-T) and fibrous (Nph-A) morphologies, and mixing Nph-A with Rh-T leads to a densely crosslinked colloidal network (Nph-A/Rh-T) via mutually promoted supramolecular polymerization via nucleation-growth assembly. Because of the RGD-rich sequences in the crosslinked network, further research on in situ targeted cancer cell (MDA-MB-231) encapsulation via RGD–integrin recognition was performed, and the modulation of cell behaviours (e.g., cell viability and migration) was demonstrated using both confocal laser scanning microscopy (CLSM) imaging and a scratch wound healing assay.

A cross-linking of peptide–nucleic base amphiphiles leads to a dense colloidal network that can perform targeted cancer cell encapsulation in situ.