Long-wavelength Ultraviolet A1 and Visible Light Photoprotection: A Multimodality Assessment of Dose and Response

Human skin is exposed to visible light (VL; 400–700 nm) and long-wavelength ultraviolet A1 (UVA1) radiation (370–400 nm) after the application of organic broad-spectrum sunscreens. The biologic effects of these wavelengths have been demonstrated; however, a dose–response has not been investigated. Ten subjects with Fitzpatrick skin phototype IV-VI were enrolled. Subjects were irradiated with 2 light sources (80–480 J cm⁻²): one comprising VL with less than 0.5% UVA1 (VL+UVA1) and the other pure VL. Skin responses were evaluated for 2 weeks using clinical and spectroscopic assessments. 4-mm punch biopsies were obtained from nonirradiated skin and sites irradiated with 480 J cm⁻² of VL+UVA1 and pure VL 24 h after irradiation. Clinical and spectroscopic assessments demonstrated a robust response at VL+UVA1 sites compared with pure VL. Histology findings demonstrated a statistically significant increase in the marker of inflammation (P < 0.05) and proliferation (P < 0.05) at the irradiated sites compared with nonirradiated control. Threshold doses of VL+UVA1 resulting in biologic responses were calculated. Results indicate that approximately 2 h of sun exposure, which equates to VL+UVA1 dose (~400 J cm⁻²), is capable of inducing inflammation, immediate erythema and delayed tanning. These findings reinforce the need of photoprotection beyond the UV range.     

A modern approach to the solution and analysis of the Simha-Somcynsky model for the description of pressure-volume-temperature properties of polymer fluids

We revisit the Simha-Somcynsky model of polymer fluids with the purpose of developing novel theoretical and computational approaches to simplify and speed up its solution as well as the fitting of experimental data, and decrease its level of mathematical complexity. We report a novel method that allows us to solve one of the two equations of the model exactly, thus putting the level of mathematical difficulty on a par with the one of other models for polymer fluids. Moreover, we describe a computational algorithm capable of fitting all five parameters of the model in an unbiased way. The results obtained reproduce literature results and fit experimental pressure-volume-temperature and solubility parameter data for three polymers very accurately. Moreover, the new techniques allow for the investigation of the model at very low temperatures. Unexpectedly, the model predicts behaviors that could be interpreted as a glass transition, as routinely observed in dilatometry and differential scanning calorimetry, and a glass phase. We compared the predicted and experimental T g’s for cis poly(1,4-butadiene) and found an excellent quantitative agreement.     

An interior–exterior Schwarz algorithm and its convergenceUn algorithme de Schwarz intérieur–extérieur et sa convergence

In this work we study the solution of Laplace's equation in a domain with holes by an iteration consisting of splitting the problem in an exterior one, around the holes, plus an interior problem in the unholed domain. We show the existence of a decomposition of the solution when the exterior problem is represented by means of a single-layer protential. Also, for the three-dimensional case and with some adjustments for the two-dimensional case, we prove convergence of the method by writing the iteration as a Jacobi iteration for an operator equation and studying the spectrum of the iteration operator. To cite this article: R. Celorrio et al., C. R. Acad. Sci. Paris, Ser. I 334 (2002) 923–926.     

Asymptotically balanced schemes for non-homogeneous hyperbolic systems – application to the Shallow Water equations

In this work we introduce a class of balanced numerical schemes, up to second order, for the solution of general non-homogeneous hyperbolic systems of conservation laws. We give a general technique to build such schemes. We also prove that they balance up to second order a large class of steady solutions in the whole domain but some subset whose measure tends to zero as the grid size decreases to zero. We finally present an application to Shallow Water equations that exhibit the good performances of some of the schemes introduced. To cite this article: T. Chacón Rebollo et al., C. R. Acad. Sci. Paris, Ser. I 338 (2004).     

Linearized Stability of Charged Thin-Shell Wormholes

The linearized stability of charged thin shell wormholes under spherically symmetric perturbations is analyzed. It is shown that the presence of a large value of charge provides stabilization to the system, in the sense that the constraints onto the equation of state are less severe than for non-charged wormholes.     

Kinetics of the thermal decomposition of bis(trifluoromethyl) peroxydicarbonate,CF3OC(O)OOC(O)OCF3

Thermal decomposition of bis(trifluoromethyl) peroxydicarbonate has been studied. The mechanism of decomposition is a simple bond fission, homogeneous first‐order process when the reaction is carried out in the presence of inert gases such as N₂ or CO. An activation energy of 28.5 kcal mol^?1 was determined for the temperature range of 50–90°C. Decomposition is accelerated by nitric oxide because of a chemical attack on the peroxide forming substances different from those formed with N₂ or CO. An interpretation on the influence of the substituents in different peroxides on the O? O bond is given. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 35: 15–19, 2003     

Effect of nanotube functionalization on the properties of single‐walled carbon nanotube/polyurethane composites

A commercially available aliphatic thermoplastic polyurethane formulated with a methylene bis(cyclohexyl) diisocyanate hard segment and a poly(tetramethylene oxide) soft segment and chain‐extended with 1,4‐butanediol was dissolved in dimethylformamide and mixed with dispersed single‐walled carbon nanotubes. The properties of composites made with unfunctionalized nanotubes were compared with the properties of composites made with nanotubes functionalized to contain hydroxyl groups. Functionalization almost eliminated the conductivity of the tubes according to the conductivity of the composites above the percolation threshold. In most cases, functionalized and unfunctionalized tubes yielded composites with statistically identical mechanical properties. However, composites made with functionalized tubes did have a slightly higher modulus in the rubbery plateau region at higher nanotube fractions. Small‐angle X‐ray scattering patterns indicated that the dispersion reached a plateau in the unfunctionalized composites that was consistent with the plateau in the rubbery plateau region. The room‐temperature modulus and tensile strength increase was proportionally higher than almost all increases seen previously in thermoplastic polyurethanes; however, the increase was still an order of magnitude below what has been reported for the best nanotube–polymer systems. Nanotube addition increased the hard‐segment glass transition temperature slightly, whereas the soft‐segment glass transition was so diffuse that no conclusions could be drawn. Unfunctionalized tubes suppressed the crystallization of the hard segment; whereas functionalized tubes had no effect. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 490–501, 2007     

The unsatisfiability threshold revisited

The problem of determining the unsatisfiability threshold for random 3-SAT formulas consists in determining the clause to variable ratio that marks the experimentally observed abrupt change from almost surely satisfiable formulas to almost surely unsatisfiable. Up to now, there have been rigorously established increasingly better lower and upper bounds to the actual threshold value. In this paper, we consider the problem of bounding the threshold value from above using methods that, we believe, are of interest on their own right. More specifically, we show how the method of local maximum satisfying truth assignments can be combined with results for the occupancy problem in schemes of random allocation of balls into bins in order to achieve an upper bound for the unsatisfiability threshold less than 4.571. In order to obtain this value, we establish a bound on the q-binomial coefficients (a generalization of the binomial coefficients). No such bound was previously known, despite the extensive literature on q-binomial coefficients. Finally, to prove our result we had to establish certain relations among the conditional probabilities of an event in various probabilistic models for random formulas. It turned out that these relations were considerably harder to prove than the corresponding ones for unconditional probabilities, which were previously known.     

An unusual syn conformation of 5‐formyluracil stabilized by supramolecular interactions

The asymmetric unit of the amino–oxo tautomer of 5‐formyluracil (systematic name: 2,4‐dioxo‐1,2,3,4‐tetrahydropyrimidine‐5‐carbaldehyde), C₅H₄N₂O₃, comprises one planar amino–oxo tautomer, as every atom in the structure lies on a crystallographic mirror plane. At variance with all the previously reported small‐molecule crystal structures containing the 5‐formyluracil residue, the formyl substituent in the title compound exhibits an unusual syn conformation. The molecules are linked into planar sheets parallel to the bc plane by a combination of six N—H...O and C—H...O hydrogen bonds. Four of the hydrogen bonds are utilized to stabilize the formyl group in the syn conformation.     

Growth kinetics and phenolics production inGlycine Max cell suspension cultures

Glycine max was used as a model plant cell suspension culture to establish relationships among growth kinetics, phenolics production, elicitor action, and peroxidase activity. Timing of elictor addition through monitoring of peroxidase provided an excellent means of optimizing yields of phenolics and reduced the time span during which phenolics were formed, negating the need for a secondary production medium. We have also determined that calcium and other cellular effectors like polyamines and organic osmolytes, when used in conjunction with elicitors, enhance phenolics production. Calcium directly enhanced elicitation, whereas polyamines and other osmolytes such as glycerol and proline extended cell viability. The study also demonstrated potential for enhancing secondary metabolite production by a combination of elicitation, cell viability stabilizers, and by addition of nutrients at the time of elicitation.