Novel acrylic macromonomer with amphiphilic character derived from Triton X‐100: Radical copolymerization with methyl methacrylate and thermal properties

This article explores the synthesis of a novel methacrylic macromonomer with an amphiphilic character derived from poly(ethylene glycol) tert‐octylphenyl ether (MT) and its respective homopolymer. To know their reactivity in radical copolymerization reactions with methyl methacrylate (MMA), a model monomer (MTm) was synthesized to determine the reactivity ratios and compare them with the low molar fractions of copolymers of MT with MMA because they were difficult to isolate. They were r_MTm = 0.97 and r_MMA = 0.95. The compositional diagrams when representing the weight fraction of MT and MTm in the feed and the copolymer suggested that a clear correlation exists between the experimental points of the model monomer MTm and the macromonomer MT ones, suggesting that the length of the side poly(ethylene oxide) chain does not affect the reactivity of the methacrylic double bond in the prepared monomers for this type of polymerization reaction. The reactivity ratios of the copolymers have a tendency for the formation of random or Bernoullian copolymers. The glass‐transition temperatures (T_g's) of the prepared copolymers were determined by differential scanning calorimetry, deviated from the Fox equation, and discussed on the basis of treatments that consider the influence of the monomeric units along the copolymer chains, determining the T_g of the corresponding alternating dyads. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1641–1649, 2003     

Hydrophilic and hydrophobic copolymer systems based on acrylic derivatives of pyrrolidone and pyrrolidine

This article deals with the synthesis of hydrophilic methacrylic monomers derived from ethyl pyrrolidone [2‐ethyl‐(2‐pyrrolidone) methacrylate (EPM)] and ethyl pyrrolidine [2‐ethyl‐(2‐pyrrolidine) methacrylate (EPyM)] and their respective homopolymers. For the determination of their reactivity in radical copolymerization reactions, both monomers were copolymerized with methyl methacrylate (MMA), the reactivity ratios being calculated by the application of linear and nonlinear mathematical methods. EPM and MMA had ratios of r_EPM = 1.11 and r_MMA = 0.76, and this indicated that EPM with MMA had a higher reactivity in radical copolymerization processes than vinyl pyrrolidone (VP; r_VP = 0.005 and r_MMA = 4.7). EPyM and MMA had reactivity ratios of r_EPyM = 1.31 and r_MMA = 0.92, and this implied, as for the EPM–MMA copolymers, a tendency to form random or Bernoullian copolymers. The glass‐transition temperatures of the prepared copolymers were determined by differential scanning calorimetry (DSC) and were found to adjust to the Fox equation. Total‐conversion copolymers were prepared, and their behavior in aqueous media was found to be dependent on the copolymer composition. The swelling kinetics of the copolymers followed water transport mechanism case II, which is the most desirable kinetic behavior for a swelling controlled‐release material. Finally, the different states of water in the hydrogels—nonfreezing water, freezing bound water, and unbound freezing water—were determined by DSC and found to be dependent on the hydrophilic and hydrophobic units of the copolymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 395–407, 2003     

A study of ion exchange selectivity coefficient by cyclic voltammetric measurement

An equation to express ion exchange selectivity coefficient was derived and used for calculating that of PPY film with the results obtained by cyclic voltammetric measurement. PPY film was synthesized by electrochemical method in aqueous solution using K₄Fe(CN)₆ as supporting electrolyte, and the anions were doped into the film. Ion exchange behaviour of doped Fe (CN)₆^3-/4- in the PPY film with Cl^?, NO₃^? or F^? ions in solution has been studied, and the corresponding ion exchange selectivity coefficients were determined.     

Photothermal techniques applied to the determination of the water vapor diffusion coefficient and thermal diffusivity of edible films.

Water vapor diffusion coefficient (WVDC) and thermal diffusivity (alpha) were determined in gelatin-starch films through photothermal techniques. The effect of different variables in the elaboration of these films, such as starch and glycerol concentrations and pH, were evaluated through the response surface methodology. The results indicated that an increase in the glycerol concentration and pH favored the WVDC of the films. On the other hand, alpha was influenced principally by the starch content and pH of the film-forming solution. The minimum alpha value was 4.5 x 10(-4) cm2/s, which is compared with alpha values reported for commercial synthetic polymers.     

Long-Range proton-proton coupling constants. I. Propanic coupling involving a methyl group 4JMeH

An equation is formulated on the basis of theoretical INDO/FPT calculations which describes the angular dependence of the propanic long-range coupling constant ⁴J_MeH in substituted HCCCH₃ fragments. This equation is a truncated Fourier series in the torsion angle ?, HCCMe, which takes into account the dependence of the Fourier coefficients on the bond angle θ, CCMe. The substituent effects are assumed to be additive. Some parameters in the equation may be obtained from the ⁴J_MeH couplings in propane and neopentane derivatives. The calculated effect upon ⁴J_MeH of changes in the bond angle θ is significant and it seems to be in part the cause of some effects which have been attributed to conformational dependence.     

Ketene dithioacetal derivatives of 1-phenyl-3,5-dioxopyrazolidine. Synthesis and NMR characterization

1-Phenyl-3,5-dioxopyrazolidine 1 reacts with carbon disufide and alkyl halides in presence of excess of sodium acetate in dimethylformamide to afford the ketene dithioacetals 3a-h . The ¹³C chemical shift assignments of these compounds were made on the basis of two-dimensional nmr studies performed on the N-methylketene dithioacetal derivative 4.     

Synthesis and Structure of Dimolybdenum Carbonyl Thiolate Compound [Et4N]2[Mo2（CO）8（SC6H4—CH3—m）2]

1 INTRODUCTION In 1984, thiolate ligand was successfully introduced into molybdenum carbonyl compound by the reaction of Mo(CO)6 with [Et4N]SR( R = C6H5, But) in a moderate condition[1]. From then on, a series of dinuclear molybdenum(0) carbonyl thiolate compounds have been synthesized and characterized by using a variety of thiolate ligands in our research group. It was found that a planar Mo2S2 unit is in the compound [Et4N]2[Mo2(CO)8(SC6H4-CH_3-p)2][2] (2) and a "butterfly" t…     

Photodegradation of a 1,3,4-thiadiazole-urea herbicide. Isolation,characterization, X-ray crystal structure and synthesis of photoproducts

The photodegradation of 1,3-dimethyl-1-(2-(3-fluorobenzylthio)-1,3,4-thiadiazol-5-yl)urea as a thin film and in solution is described. The two photoproducts from thin-film photolysis were characterized by spectral and synthetic methods. The X-ray crystal structure of one of the photoproducts is also reported. The rearrangements were shown to involve an S-to-N benzyl migration, followed by a sulfur-oxygen substitution.