New interpretations of XPS spectra of nickel metal and oxides

A current interpretation of XPS spectra of Ni metal assumes that the main 6 eV satellite is due to a two hole c3d⁹4s² (c is a core hole) final state effect. We report REELS observation in AES at low voltages of losses (plasmons and inter-band transitions) corresponding to the satellite structures in Ni metal 2p spectra. The satellite near 6 eV is attributed to a predominant surface plasmon loss. A current interpretation of Ni 2p spectra of oxides and other compounds is based on charge transfer assignments of the main peak at 854.6 eV and the broad satellite centred at around 861 eV to the cd⁹L and the unscreened cd⁸ final-state configurations, respectively (L is a ligand hole). Multiplet splittings have been shown to be necessary for assignment of Fe 2p and Cr 2p spectral profiles and chemical states. The assignments of Ni 2p states are re-examined with intra-atomic multiplet envelopes applied to Ni(OH)₂, NiOOH and NiO spectra. It is shown that the free ion multiplet envelopes for Ni²⁺ and Ni³⁺ simulate the main line and satellite structures for Ni(OH)₂ and NiOOH. Fitting the NiO Ni 2p spectral profile is not as straightforward as the hydroxide and oxyhydroxide. It may involve contributions from inter-atomic, non-local electronic coupling and screening effects with multiplet structures significantly different from the free ions as found for MnO. A scheme for fitting these spectra using multiplet envelopes is proposed.     

Electronic structure of lanthanum transition-metal oxyarsenides LaMAsO (M = Fe,Co, Ni) and LaFe1−xM′xAsO (M′ = Co,Ni) by X-ray photoelectron and absorption spectroscopy

The electronic structures of the quaternary oxyarsenides LaMAsO (M = Fe, Co, Ni) were examined with X-ray photoelectron spectroscopy (XPS) and X-ray absorption near-edge spectroscopy (XANES). Interpretation of the metal 2p_3/2 and arsenic 3d_5/2 binding energies, as well as a satellite feature in the Co 2p XPS spectrum, suggests charges that are much less extreme than expected (i.e., not M²⁺ and As^3?) because of the strong covalent character within the M–As bonds. As M is varied, the differing degrees of charge transfer from M to As atoms within these bonds are manifested by shifts in the As 3d_5/2 binding energies and changes in the As K-edge intensities. This charge transfer is isolated within the [MAs] layer and does not influence the O 1s and La 3d XPS spectra. Fitting the experimental valence band spectra of these oxyarsenides LaMAsO yielded electron populations of states that support the formal charge assignment [La³⁺O^2?][M²⁺As^3?]. The mixed-metal series LaFe_1?xM′_xAsO (M′ = Co, Ni) was examined by XANES; analysis of the metal K- and L-edges, as well as of the Co 2p XPS satellite feature, revealed that no metal–metal charge transfer takes place.     

Evaluation of one‐ and two‐equation low‐Re turbulence models. Part I—Axisymmetric separating and swirling flows

This first segment of the two‐part paper systematically examines several turbulence models in the context of three flows, namely a simple flat‐plate turbulent boundary layer, an axisymmetric separating flow, and a swirling flow. The test cases are chosen on the basis of availability of high‐quality and detailed experimental data. The tested turbulence models are integrated to solid surfaces and consist of: Rodi's two‐layer k–ε model, Chien's low‐Reynolds number k–ε model, Wilcox's k–ω model, Menter's two‐equation shear‐stress‐transport model, and the one‐equation model of Spalart and Allmaras. The objective of the study is to establish the prediction accuracy of these turbulence models with respect to axisymmetric separating flows, and flows of high streamline curvature. At the same time, the study establishes the minimum spatial resolution requirements for each of these turbulence closures, and identifies the proper low‐Mach‐number preconditioning and artificial diffusion settings of a Reynolds‐averaged Navier–Stokes algorithm for optimum rate of convergence and minimum adverse impact on prediction accuracy. Copyright © 2003 John Wiley & Sons, Ltd.     

Evaluation of one‐ and two‐equation low‐Re turbulence models. Part II—Vortex‐generator jet and diffusing S‐duct flows

This second segment of the two‐part paper systematically examines several turbulence models in the context of two flows, namely a vortex flow created by an inclined jet in crossflow, and the flow field in a diffusing S‐shaped duct. The test cases are chosen on the basis of availability of high‐quality and detailed experimental data. The tested turbulence models are integrated to solid surfaces and consist of: Rodi's two‐layer k–ε model, Wilcox's k–ω model, Menter's two‐equation shear–stress‐transport model, and the one‐equation model of Spalart and Allmaras. The objective of the study is to establish the prediction accuracy of these turbulence models with respect to three‐dimensional separated flows with streamline curvature. At the same time, the study establishes the minimum spatial resolution requirements for each of these turbulence closures, and identifies the proper low‐Mach‐number preconditioning and artificial diffusion settings of a Reynolds‐averaged Navier–Stokes algorithm for optimum rate of convergence and minimum adverse impact on prediction accuracy. Copyright © 2003 John Wiley & Sons, Ltd.     

Precise mass measurement of a double-stranded 500 base-pair (309 kDa) polymerase chain reaction product by negative ion electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry

Electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry (ESI-FTICRMS) has been used to determine the mass of a double-stranded 500 base-pair (bp) polymerase chain reaction (PCR) product with an average theoretical mass of the blunt-ended (i.e. unadenylated) species of 308 859.35 Da. The PCR product was generated from the linearized bacteriophage Lambda genome which is a double-stranded template. Utilization of ethanol precipitation in tandem with a rapid microdialysis step to purify and desalt the PCR product was crucial to obtain a precise mass measurement. The PCR product (0.8 pmol/μL) was electrosprayed from a solution containing 75% acetonitrile, 25 mM piperidine, and 25 mM imidazole and was infused at a rate of 200 nL/min. The average molecular mass and the corresponding precision were determined using the charge-states ranging from 172 to 235 net negative charges. The experimental mass and corresponding precision (reported as the 95% confidence interval of the mean) was 309 406 +/- 27 Da (87 ppm). The mass accuracy was compromised due to the fact that the PCR generates multiple products when using Taq polymerase due to the non-template directed 3'-adenylation. This results in a mixture of three PCR products with nearly identical mass (i.e. blunt-ended, mono-adenylated and di-adenylated) with unknown relative abundances that were not resolved in the spectrum. Thus, the experimental mass will be a weighted average of the three species which, under our experimental conditions, reflects a nearly equal concentration of the mono- and di-adenylated species. This report demonstrates that precise mass measurements of PCR products up to 309 kDa (500 bp) can be routinely obtained by ESI-FTICR requiring low femtomole amounts. Copyright 1999 John Wiley & Sons, Ltd.     

Analysis of the electronic structure of Hf(Si0.5As0.5)As by X-ray photoelectron and photoemission spectroscopy

The ternary hafnium silicon arsenide, Hf(Si_xAs_1−x)As, has been synthesized with a phase width of 0.5?x?0.7. Single-crystal X-ray diffraction studies on Hf(Si_0.5As_0.5)As showed that it adopts the ZrSiS-type structure (Pearson symbol tP6, space group P4/nmm, Z=2, a=3.6410(5) Å, c=8.155(1) Å). Physical property measurements indicated that it is metallic and Pauli paramagnetic. The electronic structure of Hf(Si_0.5As_0.5)As was investigated by examining plate-shaped crystals with laboratory-based X-ray photoelectron spectroscopy (XPS) and synchrotron radiation photoemission spectroscopy (PES). The Si 2p and As 3d XPS binding energies were consistent with assignments of anionic Si¹⁻ and As^1-. However, the Hf charge could not be determined by analysis of the Hf 4f binding energy because of electron delocalization in the 5d band. To examine these charge assignments further, the valence band spectrum obtained by XPS and PES was interpreted with the aid of TB-LMTO band structure calculations. By collecting the PES spectra at different excitation energies to vary the photoionization cross-sections, the contributions from different elements to the valence band spectrum could be isolated. Fitting the XPS valence band spectrum to these elemental components resulted in charges that confirm that the formulation of the product is Hf²⁺[(Si_0.5As_0.5)As]²⁻.     

Investigation of the quantitative properties of the quadrupole orthogonal acceleration time-of-flight mass spectrometer with electrospray ionisation using 3,4-methylenedioxymethamphetamine

This paper describes the investigation of the potential of a quadrupole orthogonal acceleration time-of-flight mass spectrometer (Q-TOF) equipped with an atmospheric pressure ionisation interface for quantitative measurements of small molecules separated by reversed phase liquid chromatography. To this end, the detection limits and linear dynamic range in particular were studied in an LC/MS/MS experiment using 3,4-methylenedioxymethamphetamine standards and 3,4-methylenedioxyethylamphetamine for internal standardisation. In a second phase, the experiment was repeated with real biological extracts (whole blood, serum, and vitreous humour). A calibration for 3,4-methylenedioxymethamphetamine and its metabolite 3,4-methylenedioxyamphetamine was prepared in each of these matrices again using 3,4-methylenedioxyethylamphetamine as internal standard. The resulting quantitative data were compared with those obtained by liquid chromatography with fluorescence detection for the same extracts. The Q-TOF results revealed excellent sensitivity and a linear dynamic range of nearly four decades (2-10 000 pg on-column, r(2) = 0.9998, 1/x weighting). Furthermore, all the calibration curves prepared in biological material were superimposable, LC/MS/MS and LC-fluorescence, and the quantitative results for actual samples compared very favourably. It was concluded that the Q-TOF achieves a linear dynamic range for quantitative LC/MS/MS work exceeding that of fluorescence detection and at much better absolute sensitivity. Copyright 1999 John Wiley & Sons, Ltd.     

Soft X-ray spectromicroscopy studies of pitting corrosion of reinforcing steel bar

Pitting corrosion of reinforcing steel bar (rebar) imbedded in concrete by chloride ions can cause concrete degradation. It is thus necessary to develop methods to mitigate concrete corrosion which could include using a protective polymer rebar coating. Corrosion studies of polyvinyl butyral-carbon black polymer-coated rebar using soft X-ray fluorescence (XRF) microprobe and micro-X-ray absorption near edge spectroscopy (μ-XANES) are reported in this study. After removal of the polyvinyl butyral-carbon black polymer coating, Fe Lα₁, Mn Lα₁, and O Kα₁ XRF maps were collected as well as Fe and Mn L₃-edge μ-XANES spectra from different regions across the whole rebar surface by collection of total electron yield (TEY) and partial XRF yield (PFY) spectra. The distribution of metallic Fe and Fe corrosion products was determined by analysis of the Fe XRF map. The μ-XANES spectra indicated a higher fraction of Fe (III) phases on the corroded rebar surface, while Fe (II/III) phases were the major corrosion products beneath the surface region. In addition, Mn (II) and Mn (III) were determined as the valence states of the manganese corrosion products.