Interaction forces in thin liquid films stabilized by hydrophobically modified inulin polymeric surfactant. 2. Emulsion films

The interaction forces in emulsion films stabilized using hydrophobically modified inulin (INUTEC SP1) were investigated by measuring the disjoining pressure of a microscopic horizontal film between two macroscopic emulsion drops of isoparaffinic oil (Isopar M). A special measuring cell was used for this purpose whereby the disjoining pressure Pi was measured as a function of the equivalent film thickness hw. The latter was determined using an interferometric method. In this way Pi-hw curves were established at a constant INUTEC SP1 concentration of 2x10(-5) mol.dm-3 and at various NaCl concentrations. At a constant disjoining pressure of 36 Pa, a constant temperature of 22 degrees C, and a film radius of 100 microm, hw decreased with an increase in the NaCl concentration, Cel, and reached a constant value of 11 nm at Cel=5x10(-2) mol.dm-3. This reduction in film thickness is due to the compression of the electrical double layer, and at the above critical NaCl concentration any electrostatic repulsion is removed and only steric interaction remains. This critical electrolyte concentration represents the transition from electrostatic to steric interaction. At a NaCl concentration of 2x10(-4) mol.dm-3 the Pi-hw isotherms showed a gradual decrease in hw with an increase in capillary pressure, after which there was a jump in hw from approximately 30 to approximately 7.2 nm when Pi reached a high value of 2-5.5 kPa. This jump is due to the formation of a Newton black film (NBF), giving a layer thickness of the polyfructose loops of approximately 3.6 nm. The film thickness did not change further when the pressure reached 45 kPa, indicating the high stability of the film. Pi-hw isotherms were obtained at various NaCl concentrations, namely, 5x10(-2), 5x10(-1), 1.0, and 2.0 mol.dm-3. The initial thicknesses are within the range 9-11 nm, after which a transition zone starts, corresponding to a pressure of about 0.5 kPa. In this zone all films transform to an NBF with a jump, after which the thickness remains constant with a further increase in the disjoining pressure up to 45 kPa, with no film rupture. This indicates the very high stability of the NBF in the presence of high electrolyte concentrations. The high emulsion film stability (due to strong steric repulsions between the strongly hydrated loops of polyfructose) is correlated with the bulk emulsion stability.     

Interaction forces in thin liquid films stabilized by hydrophobically modified inulin polymeric surfactant. 3. Influence of electrolyte type on emulsion films

The interaction forces in emulsion films stabilized using hydrophobically modified inulin (INUTEC SP1) were investigated as a function of concentrations of electrolytes of different types (NaCl, Na2SO4, and MgSO4). At a constant disjoining pressure of 36 kPa, a constant temperature of 22 degrees C, and a film radius of 100 microm, the film thickness, hw, decreased with an increase in electrolyte concentration until a critical value, Cel,cr, was reached above which hw remained constant. Cel,cr decreased with an increase in electrolyte valency (Cel,cr = 5 x 10(-2) mol.dm(-3) for NaCl and 1 x 10(-2) mol.dm(-3) for Na2SO4 and MgSO4). The reduction in film thickness below Cel,cr could be accounted for by the compression of the electrical double layer. The Pi-hw isotherms below Cel,cr could be fitted using the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory (constant charge and constant potential cases were considered). At a certain pressure, the film jumped to a Newton black film. The pressure at the jump decreased with an increase in electrolyte valency as a result of the reduction of the electrostatic barrier. At electrolyte (NaCl, Na2SO4, or MgSO4) concentrations higher than Cel,cr, the jump occurred at a low pressure that was independent of the electrolyte type. The thickness of the Newton black film was independent of both the concentration and nature of the electrolytes studied. The results show clearly that the polyfructose loops and tails remain strongly hydrated both in water and in high concentrations of electrolytes of different types, and these results explain the high INUTEC SP1 emulsion stability against coalescence of emulsions prepared under such conditions.     

A monopole mass filter with a hyperbolic V-shaped electrode

In this article we compare the classical monopole mass filter of von Zahn and the monopole mass filter with a hyperbolic V-shaped electrode. The experimental results and those of computer simulation for both mass spectrometers are presented. We show that the replacement of a conventional 90 degrees V-shaped electrode by an electrode with a hyperbolic profile substantially improves the peak shape of any given mass, and increases the mass resolution by a factor of 3-4 and the abundance sensitivity by a factor of 100. The potential of high analytical performance combined with electroforming techniques for electrode manufacture indicate future practical uses of such instruments. Copyright 1999 John Wiley & Sons, Ltd.     

Selected fluorescence and dissociation lifetimes on N2O+ in its Ã(2Σ+),000 and 100 states

Radiative and radiationless lifetimes together with the quantum yield towards fluorescence of individual vibronic states of molecular ions can be determined by threshold electron—fluorescence photon coincidence measurements. This method is here applied to the X?²Π_{$\text{3}\text{2,1,2}$} and òΣ⁺ states of N₂O⁺ which were also studied by high resolution photoionization resonance spectroscopy.     

Electrostatic and steric interactions in oil-in-water emulsion films from Pluronic surfactants

Stabilization of oil-in-water emulsion films from PEO-PPO-PEO triblock copolymers is described in terms of interaction surface forces. Results on emulsion films from four Pluronic surfactants, namely F108, F68, P104 and P65 obtained with the Thin Film Pressure Balance Technique are summarized. It is found that film stabilization is due to DLVO (electrostatic) and non-DLVO (steric in origin) repulsive forces. The charging of the oil/water film interfaces is related to preferential adsorption of OH(-) ions. This is confirmed by pH-dependent measurements of the equivalent film thickness (h(w)) at both constant capillary pressure and ionic strength. With reducing pH in the acidic region, a critical value (pH(cr,st)) corresponding to an isoelectric state of the oil/water film surfaces is found where the electrostatic interaction in the films is eliminated. At pH≤pH(cr,st), the emulsion films are stabilized only by steric forces due to interaction between the polymer adsorption layers. Disjoining pressure (Π) isotherms measured for emulsion films from all the four Pluronic surfactants used at pH相似文献   

Evaluation of Conformational dynamics properties of spin-labelled proteins at different degrees of nitroxide radicals immobilization

Spin-labelling has found wide applications in elucidation of the dynamic behaviour of biological macromolecules in aqueous media and biomembranes. Most of the proposed methods aimed at estimation of macromolecular correlation times (τ_c) assume, however, spin label molecules rigidly bound within the protein matrix. To avoid this limitation theoretical models which involve additional dynamic parameters to characterize the spin label motion should be considered. We have used ESR spectra analysis technique which permits quantitative separation of slow macromolecular rotation (described by the rotational correlation time, τ_c) and fast anisotropic relative to protein nitroxyl radical motion (described by the “order parameter”,S). This method was applied to study: i) conformational dynamics of covalently and non-covalently spin-labelled human serum albumin (HSA) in solution; ii) protein-protein (antigen-antibody) interactions in a model system containing spin-labelled bovine serum albumin (BSA) and anti-BSA immunoglobulin (IgG) in solution; and iii) dynamic properties of membrane-bound proteins: H⁺-ATPase (CF₁-CF₀ coupling factor of photophosphorylation) and Photosystem I pigment-protein reaction centre complex (PSI RC) isolated from spinach chloroplasts and reconstituted in proteoliposomes.     

Synthetic studies toward (-)-FR901483 using a conjugate allylation to install the C-1 quaternary carbon

Two approaches to the aza-tricyclo dodecane skeleton of (-)-FR901483 are reported. Both routes utilized a Grignard addition to an N-acylpyridinium salt to establish the absolute stereochemistry at C-6 and a highly diastereoselective conjugate allylation reaction to form the quaternary center at C-1 of the natural product in an excellent yield. Although the desired polysubstituted piperidine intermediates were prepared regio- and stereoselectively, the construction of the C-8/C-9 bond connectivity could not be achieved. All attempts at a pinacol cyclization or an intramolecular 6-exo-tet epoxide opening were unsuccessful because of an unfavorable A(1,3) strain inherent in the molecule.     

Spongistatin synthetic studies. evolution of a scalable synthesis for the EF fragment of (+)-Spongistatin 1 exploiting a Petasis-Ferrier union/rearrangement tactic

[structure: see text] An efficient, stereocontrolled, and scalable second-generation synthesis of (+)-3, an advanced EF subtarget for the total synthesis of (+)-spongistatin 1, has been achieved. Highlights of the strategy include preparation of the F-ring pyran via a Petasis-Ferrier union/rearrangement sequence and installation of the chlorodiene side chain employing a cyanohydrin alkylation. The longest linear sequence, 26 steps, proceeds in 8.3% overall yield.     

Justification of the Kirchhoff hypotheses and error estimation for two-dimensional models of anisotropic and inhomogeneous plates, including laminated plates

Asymptotic analysis of the problem describing deformation ofa thin cylindrical plate with clamped lateral side is performed.The problem is considered under the most general statement withthe plate being laminated and consisting of an arbitrary numberof nonhomogeneous and anisotropic (21 elastic moduli) layers.Explicit integral representations of the differential operatorswhich form the two-dimensional model of the plate are derived.In the case when the elastic moduli of each of the layers areconstant, these integral representations turn into algebraicones. The asymptotic procedure is justified with the help ofa weighted inequality of Korn's type. The error estimates obtainedgive a rigorous mathematical proof of both of Kirchhoff's hypotheses(kinematic and static) and shed light on the well-known intrinsicinconsistency of two of the hypotheses.