Cobalt promoted Ni/MgAl2O4 catalyst in lean methane catalytic oxidation

In the present research, magnesium aluminate spinel was prepared as catalyst support using a novel, facile, and efficient mechanochemical method. The Co-promoted catalysts with 20 wt.% of Ni were fabricated using an impregnation route and the samples were analyzed by the X-ray diffraction (XRD), N₂ adsorption/desorption (BET), temperature-programmed reduction and desorption (H₂-TPR and O₂-TPD), and field emission scanning electron microscopy (FESEM) tests. The results confirmed that all samples have a mesoporous structure with a high specific surface area and the presence of cobalt caused complete CH₄ oxidation at low temperatures, and no side reactions were observed. The results indicated that the 3%Co-20%Ni/MgAl₂O₄ catalyst was the optimal sample among the prepared catalysts, owing to the improvement of reduction features and oxygen mobility. The 50 and 90% of methane conversion was obtained at 530 and 600 °C, respectively. Also, the influence of calcination temperature, GHSV, and feed ratio was determined on the catalytic activity. The obtained outcomes revealed that the calcination temperature has a significant effect on the textural properties and catalytic efficiency. The sample calcined at 700 °C showed the weakest performance, which was related to the sintering of particles at high temperatures. The catalytic stability showed that the 3%Co-20%Ni/MgAl₂O₄ has acceptable stability during 600 min time of reaction.

Graphical abstract

     

Efficacy of incorporating PCMs into the commercial wall on the energy-saving annual thermal analysis

Journal of Thermal Analysis and Calorimetry - In this study, the efficacy of incorporating phase change material (PCM) into the building walls on the annual heat transfer reduction is examined....     

Fully developed mixed convection in horizontal and inclined tubes with uniform heat flux using nanofluid

Fully developed laminar mixed convection of a nanofluid consists of water and Al₂O₃ in horizontal and inclined tubes has been studied numerically. Three-dimensional elliptic governing equations have been solved to investigate the flow behaviors over a wide range of the Grashof and Reynolds numbers. Comparisons with previously published experimental and numerical works on mixed convection in a horizontal and inclined tube are performed and good agreements between the results are observed. Effects of nanoparticles concentration and tube inclinations on the hydrodynamics and thermal parameters are presented and discussed. It is shown that the nanoparticles concentration does not have significant effects on the hydrodynamics parameters. Heat transfer coefficient increases by 15% at 4 Vol.% Al₂O₃. Skin friction coefficient continually increases with the tube inclination, but the heat transfer coefficient reaches a maximum at the inclination angle of 45°.     

Sensitive and simple cloud-point preconcentration atomic absorption spectrometry: application to the determination of cobalt in urine samples.

A new approach for developing a cloud-point extraction-flame atomic absorption spectrometric method has been described and used for the determination of cobalt. In this approach, water was removed from the final diluted surfactant rich phase obtained in cloud-point extraction procedure. The results indicated that removing water from this phase increased the enhancement factor by 4-fold. 1-(2-Pyridylazo)-2-naphthol (PAN) and octylphenoxypolyethoxyethanol (Triton X-114) were used as a hydrophobic ligand and a nonionic surfactant, respectively. The chemical variables affecting the preconcentration step were optimized. The effect of the water concentration in the final diluted methanolic surfactant solution on the analytical signal was investigated. The results showed that the analytical signal decreased by 30% and 52% in 15% and 25% water concentrations in methanol, respectively. An enhancement factor of 115 was obtained for cobalt extracted from only 10 ml of a sample. The detection limit obtained under the optimal condition was 0.38 microg l(-1). The proposed procedure was applied to the determination of cobalt in urine samples.     

Structure–retardation factor relationship of natural amino acids in two different mobile phases of RP-TLC

Abstract

Separation of amino acids (AAs) and their simple and inexpensive determination/identification is an interesting topic in biological and protein science, different food industries, and drug factories. Also, the presentation of the chromatographic behavior of compounds in a predictive model can be effective to estimate the structural/chemical properties of analyte and mobile phases. In this work for the first time, retardation factor (R_F) of 42 AAs in reversed-phase thin layer chromatography (RP-TLC) was modeled. Acetonitrile-sodium azide solution and 1,2 dioxane-sodium azide solution were two mobile phases which have been studied in this work. Results showed that the values of R_F are correlated with the structural properties of AAs and these properties had some similarities and differences in two noted mobile phases. For the TLC data in two mobile phases, five parametric linear models were suggested (R²_train = 0.93 and 0.97; R²_test = 0.93 and 0.99). The models were also evaluated with different statistical approaches. It was shown that increasing the sum of geometrical distances between N and O in AAs causes decreasing their R_F in RP-TLC using both mobile phases. Other structural effects of AAs on their separation in the desired RP-TLC system were also discussed.     

Two building blocks of microwave photonics filters in the presence of group delay ripple: a comparative survey

We have developed an analytic approach to investigate the effect of group delay ripple of the dispersive devices on the performance of two major building blocks of microwave-photonic filters. Firstly, performance of PM-based block in the presence of an arbitrary group delay ripple (GDR) is analyzed and compared with the ripple-free case to reveal the destructive effects of added group delay ripple. In the next step, we repeat the proposed approach for the AM-based one; again, the performance is compared with the ripple-free case. Two distortion metrics are also introduced to quantify this distortion. Comparison of the performance of two building blocks in the presence of group delay ripple unveils some interesting characteristics of microwave-photonic filters which have not been mentioned so far. We also add a general survey of two analyzed building blocks to present their respective most significant advantages and shortcomings. The simulated Optisystem results conform to our proposed analytical approach and verify the theoretical model.     

Highly edge-connected factors using given lists on degrees

Let G be a 2k-edge-connected graph with and let for every . A spanning subgraph F of G is called an L-factor, if for every . In this article, we show that if for every , then G has a k-edge-connected L-factor. We also show that if and for every , then G has a k-edge-connected L-factor.     

Recent approaches to the synthesis of thieno[2,3-b]pyridines (microreview)

Chemistry of Heterocyclic Compounds - This microreview describes recent approaches to the synthesis of thieno[2,3-b]pyridine derivatives. Selected works published in 2015–2019 are reviewed.     

A Simple Synthesis of Stable Phosphoranes Derived from Imidazole Derivatives

Stable crystalline phosphorus ylides were obtained in excellent yields from the 1:1:1 addition reaction between triphenylphosphine and dialkyl acetylenedicarboxylates, in the presence of strong NH-acids, such as imidazole, 2-methylimidazole, 4-methylimidazole, 2-ethylimidazole, benzimidazole, and 5,6-dimethylbezimidazole. These stable ylides exist in solution as a mixture of two geometrical isomers as a result of restricted rotation around the carbon–carbon partial double bond resulting from the conjugation of the ylide moiety with the adjacent carbonyl group.