Modeling of stress transfer behavior in fiber-matrix composite under axial and transverse loadings

Interface between fiber and matrix as a stress transfer medium determines composite performances in load-bearing structures. For instance, failures in composite are most likely initiated by an accumulation of interfacial cracks allowing little or no stress transfer from the matrix to the fiber and vice versa. This paper studies stress transfer behaviors at the interface subject to axial and transverse loadings using the finite element method. Single fiber surrounded by matrix was modeled by introducing a cohesive zone model (CZM) at the interface taking into account the bonding mechanism. By the proposed technique, plastic deformation in the matrix and exerted friction at the interface was verified to govern the role of stress transfer at the interface. Further, the influence of other fibers in matrix surrounding the model was also discussed.     

Design,synthesis, and characterization of molecularly imprinted solid phase extraction for alpha Mangostin analysis in blood sample

Low levels of α-mangostin (AM) in biological fluids require adequate sample preparation to be analyzed. Molecularly imprinted polymers can serve as sorbents in solid phase extraction, enabling concentration and extraction of α-mangostin from complex matrices, such as biological fluids. To date, there are no molecular imprinted polymers for the analysis of α-mangostin in biological fluids. In this study, AM molecular imprinted polymer (MIP) was designed using molecular modeling, molecular dynamic simulations, and prepared by bulk polymerization and suspension polymerization methods. The geometry optimization results showed that acrylamide (AAM) monomer forms the most stable complex with AM at the pre-polymerization with the most negative Gibbs free energy (ΔG) of −6.91818 Kcal/mol. Radial distribution function (RDF) in molecular dynamics simulation of AM:AAM:ethylene glycol dimethacrylate (EGDMA) with mol ratio 1:4:20 shows the complex with the best composition through the formation of four stable hydrogen bonds. Based on the experimental results, molecularly imprinted polymers in suspension exhibit better characteristics, selectivity, and adsorption capacity than in bulk. The suspension polymerization method showed a high recovery (85.88% ± 2.5), which was higher than C18 SPE cartridge (24.19% ± 1.47). Hence, it can be concluded that the MIPs from MD simulations were accessible and could be used in practice, such as in the separation and detection of AM in blood serum.     

Impact of polyvinylpyrrolidone and quantity of silver nitrate on silver nanoparticles sizing via solvothermal method for dye-sensitized solar cells

The multiple sizing of silver nanoparticles (AgNPs) were synthesized from the miscible compound of ethylene glycol (EG), polyvinylpyrrolidone (PVP) and silver nitrate (AgNO3) via the solvothermal method. During the synthesis, the PVP-AgNO3 was contemplated as a paramount parameter. Using the simple method of solvothermal, the sizing of AgNPs was easily controlled in accord with the augmentation of PVP-AgNO3 at secured and moderate temperature. In regards to the sizing of AgNPs, the presence of minimum agglomeration, the absorption capability and chemical structures were highlighted through a series of verification includes ultraviolet–visible (UV–Vis) spectroscopy, Fourier-transform infrared (FTIR) spectroscopy and transmission electron microscopy (TEM) analysis. The effectiveness of the synthesized AgNPs was further investigated and compared with the commercial AgNPs by incorporating the AgNPs into titanium dioxide (TiO2) semiconductor film-based dye-sensitized solar cells (DSSCs). Results signified that the spherical AgNPs with produced sizing within the range of 19.6 to 45.2 nm were greatly impacting by tunable quantities of PVP-AgNO3, which was validated in the forms of linear equations. A larger size promotes a slower nucleation rate that conduces agglomeration. In opposition to this, the smallest size of AgNPs develops a faster formation rate of Ag ions into AgNPs, inducing the deterrent of agglomeration in light of notable particle dispersion. The power conversion efficiency (PCE) contributed by the incorporation of synthesized AgNPs into TiO2 is also 41.2% higher than that of the commercial AgNPs-TiO2. This is because the synthesized AgNPs provides less agglomeration which led to a better surface plasmonic effect towards the nanoparticles.