An Update on Molecularly Imprinted Polymer Design through a Computational Approach to Produce Molecular Recognition Material with Enhanced Analytical Performance

Molecularly imprinted polymer (MIP) computational design is expected to become a routine technique prior to synthesis to produce polymers with high affinity and selectivity towards target molecules. Furthermore, using these simulations reduces the cost of optimizing polymerization composition. There are several computational methods used in MIP fabrication and each requires a comprehensive study in order to select a process with results that are most similar to properties exhibited by polymers synthesized through laboratory experiments. Until now, no review has linked computational strategies with experimental results, which are needed to determine the method that is most appropriate for use in designing MIP with high molecular recognition. This review will present an update of the computational approaches started from 2016 until now on quantum mechanics, molecular mechanics and molecular dynamics that have been widely used. It will also discuss the linear correlation between computational results and the polymer performance tests through laboratory experiments to examine to what extent these methods can be relied upon to obtain polymers with high molecular recognition. Based on the literature search, density functional theory (DFT) with various hybrid functions and basis sets is most often used as a theoretical method to provide a shorter MIP manufacturing process as well as good analytical performance as recognition material.     

Erratum: Synthesis and characterization of diorganotin(IV) complexes of Schiff bases with ONO‐type donors and crystal structure of [N‐(2‐hydroxy‐4‐nitrophenyl)‐3‐ethoxysalicylideneiminato]diphenyltin(IV)

The article referenced above was first published online on 30 August 2007 with incorrect pagination; the pagination has now been corrected online and in print. Copyright © 2007 John Wiley & Sons, Ltd.     

Nitroxide‐mediated radical polymerization in miniemulsion: Bimolecular termination in monomer‐free model systems

Bimolecular termination in nitroxide‐mediated radical polymerization in miniemulsion has been investigated through the heating of a polystyrene–2,2,6,6‐tetramethylpiperidinyl‐1‐oxy macroinitiator and its 4‐hydroxy‐2,2,6,6‐tetramethylpiperidinyl‐1‐oxy analogue in an aqueous toluene dispersion with sodium dodecyl benzenesulfonate as a surfactant at 125 °C. The level of bimolecular termination by combination, evaluated from the high‐molecular‐weight shoulder, was higher in miniemulsion than in solution and increased with decreasing particle size. Quantitative analysis revealed that these results cannot be rationalized solely by nitroxide partitioning to the aqueous phase. The results are explained by an interface effect, by which nitroxide is adsorbed or located at the aqueous–organic interface. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4995–5004, 2007     

Spectrophotometric determination of ciprofloxacin in pure form and in tablets through charge-transfer complexation reactions

Three simple, quick and sensitive spectrophotometric methods are described for the determination of ciprofloxacin. The methods are based on the reaction of this drug as ann-electron donor with 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ), 7,7,8,8,-tetracyanoquinodimethane (TCNQ) andp-chloranil (CL) as -acceptors to give highly coloured complex species. The coloured products are quantitated spectrophotometrically at 460, 843 and 550 nm for DDQ, TCNQ and CL, respectively. Optimization of the different experimental conditions is described. Beer's law is obeyed in the concentration ranges 5–50, 1.5–15 and 20–200 g ml^–1 ciprofloxacin, but the concentration ranges for best accuracy are 10–48, 2.5–15 and 35– 195 g ml^–1 of drug for DDQ, TCNQ and CL, respectively. The relative standard deviations are less than 1.5%. Applications of the suggested methods to ciprofloxacin tablets are presented and compared with the USP method. The stability constants of the 11 DDQ and CL complexes were 1.086 × 10⁴ and 2.581 × 10⁴ lmol^–1, respectively, whereas for the 12 TCNQ complex it was 3.62 × 10⁸1. mol^–1.     

Some polyhydroxy azo–azomethine derivatives of salicylaldehyde: Synthesis, characterization, spectroscopic, molecular structure and antimicrobial activity studies

Some new substituted polyhydroxy azo–azomethine compounds were prepared by reaction of tris(hydroxymethyl)aminomethane with (E)-2-hydroxy-5-(phenyldiazenyl) benzaldehyde and its substituted derivatives. The structures of azo and azo–azomethine compounds were determined by IR, UV–vis, ¹H NMR and ¹³C NMR spectroscopic techniques, and/or X-ray diffraction studies. According to IR spectra, all azo–azomethine compounds adopt keto form in solid state. UV–vis analysis has shown the presence of keto–enol tautomerism in solution for all azo–azomethine compounds, except that for nitro substituted derivative, enol form is dominantly favored in solution. At the same time, above mentioned derivative compounds were studied in vitro for their antimicrobial properties. Among the phenylazosalicylaldehyde series compound tested, 4-phenylazosalicylaldehyde, 4-(3-chlorophenylazo)salicylaldehyde, 4-(2-chlorophenylazo)salicylaldehyde, 4-(4-fluorophenylazo)salicylaldehyde, 4-(3-chlorophenylazo)salicylaldehyde and 4-(4-ethylphenylazo)salicylaldehyde showed a weak antimicrobial activity only against gram positive bacteria. On the contrary, phenylazosalicylaldehyde series compounds were reacted tris(hydroxmethyl)aminomethane, that exhibited a strong antimicrobial activity against gram positive bacteria, yeast and mould. Moreover, while the 2-{[1,3-dihydroxy-2-(hydroxymethyl)propan-2-ylimino]methyl}phenol did not show an inhibition on tested microorganism, the addition of phenyldiazine groups to 2-{[1,3-dihydroxy-2-(hydroxymethyl)propan-2-ylimino]methyl}phenol resulted in a strong increases in antimicrobial activity.     

Thermal analysis of pharmaceutical compounds

Some sulphonamides are evaluated by means of thermal analysis. Use is made of their characteristic endothermic DTA peaks (melting peaks), where the area changes linearly with variations in the amount of sulphonamides. The method is suitable for the determination of 30–100 mg of sulphathiazole, sulphisomidine, sulphaguanidine, sulphacetamide sodium and sulphamethoxypyridazine with reasonable accuracy. As for sulphisoxazole, two peaks are used for its determination: an endothermic one to determine 30–100 mg, and an exothermic one to determine 6–30 mg.

---

Zusammenfassung Einige Sulphonamide wurden durch thermische Analyse bestimmt, wobei von der linearen Abhängigkeit der Fläche der charakteristischen endothermen DTA-Peaks (Schmelzpeaks) von der Menge der Sulphonamide Gebrauch gemacht wurde. Mit der Methode können 30–100 mg Sulphathiazol, Sulphisoimidin, Sulphaguanidin, Natrium-Sulphacetamid und Sulphamethoxypyridazin mit ausreichender Genauigkeit bestimmt werden. Bei der Bestimmung von Sulphisooxazol wurde ein endothermer Peak für Mengen von 30–100 mg und ein exothermer für geringere Mengen von 6–30 mg herangezogen.

---

. - ( ), . 30–100 , , , . , — 30 100 , — 6 30 .

     

A 1H NMR study of 1,4-bis(N-hexadecyl-N, N-dimethylammonium)butane dibromide/sodium anthranilate system: spherical to rod-shaped transition

The effect of addition of sodium anthranilate to 5 mM micellar solutions of gemini surfactant 1,4-bis(N-hexadecyl-N,N-dimethylammonium)butane dibromide is investigated by ¹H NMR. The solubilization site of anthranilate anion near the micellar surface is inferred. In the micelles, the An⁻ ions intercalate among the surfactant headgroups producing morphological changes.     

FT-IR spectroscopic detection of pesticide after sorption onto modified pumice

Organoclays can be prepared by modification of the surface with a cationic surface active compound and used for the immobilisation or separation of non-polar contaminants from polluted waters. In this work pumice is used instead of clay material. Batch system experiments were performed for the modification of pumice surface with hexadecyltrimethylammonium bromide. Modification of pumice and then the sorption of pesticide, Fenvalerate, from water have been traced by FT-IR spectroscopy.     

Adsorption of N-Nitrosodiethylamine and N-Nitrosodimethylamine on Activated Carbon: A Pre-Concentration Procedure for Gas Chromatographic Analysis

In this study, a rapid pre-concentration procedure, which employs powdered activated carbon as a clean-up and pre-concentration material, is described for the gas chromatographic analysis of N-nitrosodiethylamine (NDEA) and N-nitrosodimethylamine (NDMA) in aqueous solutions. It was found that powdered activated carbon is suitable for the adsorption of volatile N-nitrosamine compounds from aqueous solutions. Adsorption efficiency with spiked beer samples (alcohol content 5% v/v) was found to be 80.5% (NDMA) and 89.4% (NDEA) and recovery of extraction from activated carbon was calculated as 82.1% (NDMA) and 89.7% (NDEA), respectively. The effect of 100µgmL^–1 of tannic acid on the adsorption was also studied, and no significant effect on the adsorption and extraction of volatile N-nitrosamine compounds was found.     

Oxidation of cyclohexane catalyzed by metal-ion-exchanged zeolites

The ion-exchange rates and capacities of the zeolite NaY for the Cu(II), Co(II), and Pb(II) metal ions were investigated. Ion-exchange equilibria were achieved in approximately 72 h for all the metal ions. The maximum ion exchange of metal ions into the zeolite was found to be 120 mg Pb(II), 110 mg Cu(II), and 100 mg Co(II) per gram of zeolite NaY. It is observed that the exchange capacity of a zeolite varies with the exchanged metal ion and the amount of metal ions exchanged into zeolite decreases in the sequence Pb(II) > Cu(II) > Co(II). Application of the metal-ion-exchanged zeolites in oxidation of cyclohexane in liquid phase with visible light was examined and it is observed that the order of reactivity of the zeolites for the conversion of cyclohexane to cyclohexanone and cyclohexanol is CuY > CoY > PbY. It is found that conversion increases by increase of the empty active sites of a zeolite and the formation of cyclohexanol is favored initially, but the cyclohexanol is subsequently converted to cyclohexanone.