Enhancing Electrocatalytic Activity through Liquid-Phase Exfoliation of NiFe Layered Double Hydroxide Intercalated with Metal Phthalocyanines in the Presence of Graphene

Earth-abundant transition-metal-based catalysts are attractive for alkaline water electrolysis. However, their catalytic properties are often limited by their poor electrical conductivity. Here, we present a strategy for enhancing the electrical conductivity of NiFe layered double hydroxide (LDH) in order to further improve its properties as an electrocatalyst for the oxygen evolution reaction (OER) in alkaline media. We show that NiFe LDH containing metal tetrasulfonate phthalocyanine in the interlayers between the NiFe oxide galleries can be coupled with graphene during liquid-phase exfoliation by taking advantage of their π-π stacking capabilities. A substantial enhancement in the electrocatalytic activity of NiFe LDH with respect to the OER was observed. Moreover, the activity and selectivity of the catalyst materials towards the oxygen reduction reaction were investigated, demonstrating that both the metal hydroxide layer and the interlayer species contribute to the electrocatalytic performance of the composite material.     

Tailored doxycycline delivery from MCM-41-type silica carriers

Doxycycline, an antibiotic from the tetracycline class with a broad spectrum of activity, was used to prepare drug delivery systems based on pristine and functionalized mesostructured silica supports. MCM-41-type materials with different textural, structural, and surface properties were used to assess their influence on the drug release kinetics. Small- and wide-angle XRD, FTIR spectroscopy and N₂ adsorption/desorption isotherms were used to characterize the carriers before and after doxycycline loading. The drug release experiments were performed in vitro in 0.2 M phosphate buffer solution at 37 °C, and the slowest drug release kinetics was obtained for magnesium-modified MCM-41 carrier. All drug-loaded materials exhibited good antibacterial activity against Klebsiella pneumoniae ATCC 10031 strain, similar to the drug alone.     

Norm closed operator ideals in Lorentz sequence spaces

In this paper, we study the structure of closed algebraic ideals in the algebra of operators acting on a Lorentz sequence space.     

Capillary condensation in porous alumina observed by positronium lifetime spectroscopy

The PALS method based on time distribution measurements has been used to study capillary condensation of different gases adsorbed in microporous alumina powder. The isotherms exhibit features which are associated with a shifted gas-liquid transition. The sorption and desorption processes are irreversible presenting a hysteresis effect.Suggestions on some new aspects of the capillary condensation dynamics are made.     

Convergence of the linear delta expansion in the critical O(N) field theory

The linear delta expansion is applied to the three-dimensional O(N) scalar field theory at its critical point in a way that is compatible with the large-N limit. For a range of the arbitrary mass parameter, the linear delta expansion for (2)> converges, with errors decreasing as a power of the order n in delta. If the principal of minimal sensitivity is used to optimize the convergence rate, the errors seem to decrease exponentially with n.     

Hybrid polymeric latexes containing magnetite

The work describes a study for preparing polystyrene (PSt) and polymethyl methacrylate (PMMA) latex, containing magnetite (Fe₃O₄), covalently bounded to the polymeric chains. The magnetite was functionalized with various alkoxysilanes containing double bonds: vinyltriethoxysilane (VTES), methacryloyl propyl trimethoxysilane (MPTS) and vinyldimethylethoxysilane (VMe₂TES). The ferrite-silane composite forms higher average size particles with MPTS than with VTES. Ferrite functionalized with VMe₂TES forms stable latexes with both PSt and PMMA polymers. PSt forms also stable latexes with ferrite functionalized with VTES but unstable with ferrite functionalized with MPTS.     

Magnetic nanoparticles coated with polysaccharide polymers for potential biomedical applications

This study reports a two-steps route for obtaining magnetic nanoparticles–polysaccharide hybrid materials consisting of Fe₃O₄, NiFe₂O₄ and CuFe₂O₄ nanoparticles synthesis by coprecipitation method in the presence of a soft template followed by coating of ferrite nanoparticles of 8–10-nm size range with polysaccharide type polymers—sodium alginate or chitosan. Magnetic oxide nanoparticles and the corresponding hybrid materials were characterized by X-ray diffraction (XRD), Mössbauer spectroscopy, atomic absorption spectroscopy (AAS), FTIR spectroscopy, scanning and transmission electron microscopy (SEM and TEM) and specific surface area measurements. The vibrating sample magnetometry confirms the superparamagnetic properties of the synthesized ferrites and hybrids. Using this route, the percent of magnetic nanoparticles retained in chitosan-based hybrid materials is nearly double in comparison with that of sodium alginate–based materials. The biological activity tests on Escherichia coli ATCC 25922, Pseudomonas aeroginosa ATCC 27853, Staphylococcus aureus ATCC 25923 and Candida scotti microorganisms show the non-toxic properties of prepared hybrid materials.     

Phase-diverse coherent diffractive imaging: high sensitivity with low dose

This Letter demonstrates that coherent diffractive imaging (CDI), in combination with phase-diversity methods, provides reliable and artefact free high-resolution images. Here, using x rays, experimental results show a threefold improvement in the available image contrast. Furthermore, in conditions requiring low imaging dose, it is demonstrated that phase-diverse CDI provides a factor of 2 improvement in comparison to previous CDI techniques.     

Effect of the manufacturing parameters on the structure of nitrogen-doped carbon nanotubes produced by catalytic laser-induced chemical vapor deposition

Series of self-assembled and mono-dispersed bovine serum albumin (BSA)-conjugated ZnS/CuS nano-composites with different Zn/Cu ratios had been successfully synthesized by a combination method of the biomimetic synthesis and ion-exchange strategy under the gentle conditions. High-resolution transmission electron microscopy observation, Fourier transform infrared spectra and zeta potential analysis demonstrated that BSA-conjugated ZnS/CuS nano-composites with well dispersity had the hierarchical structure and BSA was a key factor to control the morphology and surface electro-negativity of final products. The real-time monitoring by atomic absorption spectroscopy and powder X-ray diffraction revealed that the Zn/Cu ratio of nano-composites could be controlled by adjusting the ion-exchange time. In addition, the metabolic and morphological assays indicated that the metabolic proliferation and spread of rat pheochromocytoma (PC12) cells could be inhibited by nano-composites, with the high anti-cancer activity at a low concentration (4 ppm). What were more important, Zn and Cu in nano-composites exhibited a positive cooperativity at inhibiting cancer cell functions. The microscope observation and biochemical marker analysis clearly revealed that the nano-composites-included lipid peroxidation and disintegration of membrane led to the death of PC12 cells. Summarily, the present study substantiated the potential of BSA-conjugated ZnS/CuS nano-composites as anti-cancer drug.     

Polymer colloids and silver nanoparticles hybrid materials

The present study presents two different methods to obtain hybrid material formed by the poly [styrene (ST)–poly(ethylene glycol) methyl ether methacrylate (PEGMA) 1100] and silver (Ag⁰). The aim has been to cover the polymeric particles with Ag⁰ shell. The first method consisted of mixing Ag⁰ nanoparticles dispersion with poly (ST-PEGMA 1100) dispersion, while in the second method, the Ag⁰ nanoparticles have been generated in situ. The hybrid materials have been characterized by MO, dynamic light scattering, scanning electron microscopy, transmission electron microscopy, high-resolution transmission electron microscopy, X-ray energy dispersive spectrometry, and ultraviolet–visible spectrophotometry. The results confirm the obtaining of two types of morphologies. In the first case, the nanoparticles have been arranged in the interspatial zones of the polymer particles, while in the second method, the Ag⁰ nanoparticles have covered the polymer particles. Thus, the film obtained using the second method is more suitable for the practical application, as a separation membrane, using the antiseptic properties of Ag⁰.