Extension of the chain‐end,free‐volume theory for predicting glass temperature as a function of conversion in hyperbranched polymers obtained through one‐pot approaches

Compared with linear polymers, more factors may affect the glass‐transition temperature (T_g) of a hyperbranched structure, for instance, the contents of end groups, the chemical properties of end groups, branching junctions, and the compactness of a hyperbranched structure. T_g's decrease with increasing content of end‐group free volumes, whereas they increase with increasing polarity of end groups, junction density, or compactness of a hyperbranched structure. However, end‐group free volumes are often a prevailing factor according to the literature. In this work, chain‐end, free‐volume theory was extended for predicting the relations of T_g to conversion (X) and molecular weight (M) in hyperbranched polymers obtained through one‐pot approaches of either polycondensation or self‐condensing vinyl polymerization. The theoretical relations of polymerization degrees to monomer conversions in developing processes of hyperbranched structures reported in the literature were applied in the extended model, and some interesting results were obtained. T_g's of hyperbranched polymers showed a nonlinear relation to reciprocal molecular weight, which differed from the linear relation observed in linear polymers. T_g values decreased with increasing molecular weight in the low‐molecular‐weight range; however, they increased with increasing molecular weight in the high‐molecular‐weight range. T_g values decreased with increasing log M and then turned to a constant value in the high‐molecular‐weight range. The plot of T_g versus 1/M or log M for hyperbranched polymers may exhibit intersecting straight‐line behaviors. The intersection or transition does not result from entanglements that account for such intersections in linear polymers but from a nonlinear feature in hyperbranched polymers according to chain‐end, free‐volume theory. However, the conclusions obtained in this work cannot be extended to dendrimers because after the third generation, the end‐group extents of a dendrimer decrease with molecular weight. Thus, it is very possible for a dendrimer that T_g increases with 1/M before the third generation; however, it decreases with 1/M after the third generation. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1235–1242, 2004     

Fluorinated Copolymer-Oxide Hybrids

A fluorinated copolymer/metal oxide hybrid is fabricated by refluxing a high hydroxyl content fluorinated copolymer with tetraethoxysilane. The resulting organic-inorganic hybrids are transparent throughout the entire compositional range if processed with HCl as a catalyst. They exhibit a continuous variation in hardness, hydrophobicity, and abrasion resistance, intermediary between the properties of the pure polymer and that of a silica gel. The catalyst has a strong influence over the microstructure of the hybrid. ²⁹Si MAS-NMR indicates the presence of highly condensed silica clusters within the structure of the hybrid. If a Nd(III) alkoxide is used instead of TEOS, a Nd ³⁺-doped fluoropolymer is obtained. These results indicate that when a fluorinated copolymer contains groups amenable to hydrolysis and condensation, cross-linking with a metal alkoxide is possible, leading to an interesting families of hybrids.     

Spray thermometry using thermographic phosphors

In this study a novel technique for 2D spray temperature measurement is presented. For this purpose the thermographic phosphor (TP) Mg₄GeO_5.5F:Mn was dispersed in n-dodecane and atomised using a conventional semi solid-cone nozzle. The thermographic phosphor was excited electronically by a frequency tripled Nd:YAG laser (355 nm). An ICCD-camera in combination with an image doubler detected the subsequently emitted phosphorescence at both peak emission wavelengths located at 633 nm and 659 nm, respectively. Utilising suitable calibration measurements, the local spray temperature was determined by evaluating the intensity ratio of both emission wavelengths. To the knowledge of the authors this is the first approach of spray temperature measurement exploiting the temperature dependent intensity ratio of thermographic phosphors. PACS 07.20.Dt; 32.50.+d     

Reintroduced solids increase inhibitor levels in a pretreated corn stover hydrolysate

Following detoxification of the liquid hydrolysate produced in a corn stover pretreatment process, inhibitor levels are seen to increase with the re-addition of solids for the ensuing hydrolysis and fermentation processes. The solids that were separated from the slurry before detoxification of the liquor contain approx 60% (w/w) moisture, and contamination occurs owing to the diffusion of inhibitors from the moisture entrained in the porous structure of the corn stover solids into the bulk fluid. This evidence suggests the need for additional separation and detoxification steps to purge residual inhibitors entrained in the moisture in the solids. An overliming process to remove furans from the hydrolysate failed to reduce total organic acids concentration, so acids were removed by treatment with an activated carbon powder. Smaller carbon doses proved more efficient in removing organic acids in terms of grams of acid removed per gram of carbon powder. Sugar adsorption by the activated carbon powder was minimal.     

A computational strategy for multiscale systems with applications to Lorenz 96 model

Numerical schemes for systems with multiple spatio-temporal scales are investigated. The multiscale schemes use asymptotic results for this type of systems which guarantee the existence of an effective dynamics for some suitably defined modes varying slowly on the largest scales. The multiscale schemes are analyzed in general, then illustrated on a specific example of a moderately large deterministic system displaying chaotic behavior due to Lorenz. Issues like consistency, accuracy, and efficiency are discussed in detail. The role of possible hidden slow variables as well as additional effects arising on the diffusive time-scale are also investigated. As a byproduct we obtain a rather complete characterization of the effective dynamics in Lorenz model.     

Domain decomposition for an asymptotic geological fault modeling

We present in this paper a domain decomposition method to treat faults in geological basin modeling. The particularity of this model is that the faults whose widths are very small in comparison with the basin size, are not characterized as subdomains any more but as interfaces between sedimentary blocks. The originality of this work lies in the formulation of this new fault model and in the definition and the computation of the interface conditions between the subdomains. To cite this article: E. Flauraud et al., C. R. Mecanique 331 (2003).     

Problems, Models and Complexity. Part II: Application to the DLSP

In Part I of this study, we suggest to identify an operations research (OR) problem with the equivalence class of models describing the problem and enhance the standard computer-science theory of computational complexity to be applicable to this situation of an often model-based OR context. The Discrete Lot-sizing and Scheduling Problem (DLSP) is analysed here in detail to demonstrate the difficulties which can arise if these aspects are neglected and to illustrate the new theoretical concept. In addition, a new minimal model is introduced for the DLSP which makes this problem eventually amenable to a rigorous analysis of its computational complexity.     

Local algorithms in exterior tomography

Exterior tomographic data are taken over lines outside a central region, and such data occur in the industrial nondestructive evaluation of large objects such as rockets. We explain, using microlocal analysis, which singularities are well reconstructed from exterior data, and we explain how this phenomenon is reflected in the singular value decomposition for the exterior transform [E.T. Quinto, Singular value decompositions and inversion methods for the exterior Radon transform and a spherical transform, J. Math. Anal. Appl. 95 (1983) 437–448]. We extend Lambda Tomography to exterior data and to limited angle exterior data. The algorithm is tested on industrial data from Perceptics, Inc.