Characterization of immobilized catalases and their application in pasteurization of milk with H2O2

The catalase (fromAspergillus niger) has been immobilized by a chemical method on the pous SiO₂ modified with γ-aminopropyltrietoxysilane, followed with glutaraldehyde and by a physical method in alginate and γ-carrageenan gel. Optimum support:enzyme ratios and pH values were determined for modified SiO₂ in a series of immobilization reactions of catalase in the presence of the crosslinking agent glutaraldehyde, and for alginate and γ-carrageenan in the presence of hemoglobin and bovine serum albimine. pH and temperaturedependent activity variations and the stability properties of immobilized catalase preparations were investigated. Rate constants for H₂O₂ decomposition and catalase deactivation were determined. The decomposition rate of H₂O₂ used in the cold pasteurizatioan of milk were investigated in a discontinuous batch type reactor system. Activity half-lives of immobilized catalase were determined.     

Surface properties of Reactive Yellow 2 immobilised pHEMA and HEMA/chitosan membranes: characterisation of their selectivity to different proteins

Poly(hydroxyethyl methacrylate), pHEMA, and a composite pHEMA/chitosan networks were synthesized in the membrane form via UV initiated photo-polymerisation in the presence of an initiator ,′-azoisobutyronitrile. Reactive Yellow 2 (RY-2) was covalently immobilised as a dye–ligand onto both membranes. The polarity and surface energy of the investigated membranes were determined by contact angle measurement. The incorporation of chitosan in the pHEMA networks produced more hydrophilic surface, as indicated by contact angle analysis. The binding characteristics of lysozyme, γ-globulins, human serum albumin (HSA) and bovine serum albumin (BSA) to pHEMA-RY-2 and pHEMA/chitosan-RY-2 affinity membranes have been investigated from aqueous solution and their dye–ligand free forms were used as control systems. When chitosan was incorporated in the pHEMA network as a cationic polymer led to higher adsorption capacity for the lysozyme. Selective adsorption behaviour was also observed in the case of pHEMA/chitosan-RY-2 membrane for the lysozyme. The non-specific adsorptions of the lysozyme on the pHEMA and pHEMA/chitosan membranes were about 1.9 and 7.2 mg/ml, respectively. These were negligible for all others investigated proteins. The lysozyme adsorption data was analysed using the first-order and the second-order models. The first-order equation in both affinity membrane systems is the most appropriate equation to predict the adsorption capacities of the adsorbents. The adsorption isotherms well fitted the combined Langmuir–Freundlich model. A theoretical analysis has been conducted to estimate the thermodynamic contributions (changes in enthalpy, entropy and Gibbs free energy) for the adsorption of lysozyme to both dye–ligand immobilised membranes. The adsorption capacities of both dye–ligand immobilised membranes increased with increasing the temperature while decreased with increasing the NaCl concentration. Both affinity membranes are stable when subjected to sanitization with sodium hydroxide after repeated separation–elution cycles.     

New Copper（Ⅱ） and Nickel（Ⅱ） Complexes of 4-Morpholinoacetophenone Thiosemicarbazone： Structural, Electrochemical and Antimicrobial Studies

4-Morpholinoacetophenone thiosemicarbazone, MAPT, and its nickel（Ⅱ） and copper（Ⅱ） complexes have been prepared and characterized by elemental analysis, magnetic susceptibility, spectral methods （FT-IR, ^1H NMR） and cyclic voltammetry. Electrochemical behaviors of the complexes have been studied by cyclic voltammetry in DMF media showing metal centered reduction processes for both of them. The redox properties, nature of the electrode processes and the stability of the complexes were discussed. [Cu（MAPT）2]Cl2 complex shows Cu（Ⅱ）/Cu（Ⅰ） couple and quasi-reversible wave associated with the Cu（Ⅲ）/Cu（Ⅱ） process. The reduction/oxidation potential values depend on the structures of complexes. Also, the antimicrobial activities of these complexes were determined against S. aureus, E. coli and B. subtilis.     

Production of citric acid using immobilized conidia of Aspergillus niger

Conidia of Aspergillus niger were immobilized in calcium alginate gel for the production of citric acid. First, the type of the preactivation medium, together with the preactivation period, was investigated. It was found that A. niger requires a 2-d preactivation period at a 0.05 g/L NH₄NO₃ concentration. Second, preactivated cells were used to determine the effects of nitrogen concentration and the flow rate of oxygen and air on the production of citric acid. Maximum citric acid production was attained with medium containing 0.01 g/L of NH₄NO₃. The rate of citric acid production in the nitrogenous medium was 33% higher when oxygen was used instead of air during the production phase. This corresponds to an increase of 85% when compared to production when neither oxygen nor air was fed into the system. In the nonnitrogenous medium citric acid concentration remained similar regardless of the use of air or oxygen. However, in the nonnitrogenous production medium, citric acid production was not influenced considerably when oxygen was used instead of air. The advantage of using immobilized cells is that production is achieved easily in the continuous system. Therefore, citric acid production was also tested using a packed-bed bioreactor, and an increase in productivity by a factor of 22 was achieved compared to the batch system.     

Carrier‐Mediated Transport of Hg(II) through Bulk and Supported Liquid Membranes

The transport of Hg (II) ions from an aqueous solution into an aqueous receiving solution through bulk and supported liquid membranes containing a calix[4]arene derivative 1 as a carrier was examined. The kinetic parameters of bulk liquid membrane studies were analyzed assuming two consecutive, irreversible first‐order reactions. The influence of temperature, stirring rate, carrier concentration and solvent on the kinetic parameters (k₁, k₂, R_m ^max, t_max, J_d ^max, J_a ^max) has also been investigated. The membrane entrance rate, k₁, and the membrane exit rate, k₂, increased with increasing temperature and stirring rate. The activation energy values are calculated as 4.87 and 48.63 kj mol^?1 for extraction and reextraction, respectively. The values of calculated activation energy indicate that the process is diffusionally controlled by species. Also, the transport behavior of Hg²⁺ from aqueous solution through a flat‐sheet supported liquid membrane has been investigated by the use of calix[4]arene derivative 1 as carrier and Celgard 2500 as the solid support. A Danesi mass transfer model was used to calculate the permeability coefficients for each parameter studied. The highest values of permeability were obtained with 2‐nitrophenyloctyl‐ether (NPOE) solvent and the influence was found to be in the order of NPOE>chloroform>xylene.     

The effect of variety seeking behaviour on optimal product positioning

In this paper we develop a stochastic (first order Markovian) consumer choice model that represents variety seeking behaviour and we investigate the practical implications of this model for optimal product positioning relative to a zero order model that does not incorporate variety seeking. We show that the optimal positioning implications of a variety seeking process is indeed different than those of a (no-variety-seeking) zero order process. Based on intuition, one might expect increased variety seeking to imply that firms should increase the distance between their products in an attribute space. In fact, we show that this effect does occur for relatively low share brands. But just the opposite effect holds for relatively high share brands. That is, variety seeking behaviour generates a desire to more differentiation among low share brands, and a desire for less differentiation among high share brands.     

Effects of radiation on carbapenems: ESR identification and dosimetric features of gamma irradiated solid meropenem trihydrate

In the present work, effects of gamma radiation on solid meropenem trihydrate (MPT), which is the active ingredient of carbapenem antibiotics, were investigated by electron spin resonance (ESR) spectroscopy. Irradiated MPT presents an ESR spectrum consisting of many resonance peaks. Heights measured with respect to the spectrum baseline of these resonance peaks were used to explore the evolutions of the radicalic species responsible for the experimental spectrum under different conditions. Variations of the denoted 11 peak heights with microwave power, sample temperature and applied radiation doses and decay of the involved radicalic species at room and at high temperatures were studied. On the basis of the results derived from these studies, a molecular model consisting of the presence of four different radicalic species was proposed, and spectroscopic parameters of these species were calculated through spectrum simulation calculations. The dosimetric potential of MPT was also explored and it was concluded that MPT presents the characteristics of normal and accidental dosimetric materials.     

Charge symmetry breaking in np-->dpi(0)

The forward-backward asymmetry in np-->dpi(0), which must be zero in the center-of-mass system if charge symmetry is respected, has been measured to be [17.2+/-8.0(stat)+/-5.5(syst)]x10(-4), at an incident neutron energy of 279.5 MeV. This observable is compared to recent chiral effective field theory calculations, with implications regarding the du quark mass difference.