Semiconductor waveguide directional couplers for coherent receivers

Optical waveguide 3-dB couplers integrated on semicondutors have been studied, designed and fabricated, using both bulk and diluted multi-quantum-well InGaAsP/InP-based materials, grown by MOCVD. The device structure is based on the two-mode interference (TMI) principle and is fully compatible for integration with the optoelectronic and electronic components of a coherent receiver. Bulk material couplers provide an output balanced within 0.05 dB per nanometer and an excess loss of 1.4 dB, compared to a straight guide, while coupling loss to a tapered-lensed single mode fibre is 4 dB.Improved coupling efficiency to single-mode fibres is achieved by use of moderately diluted multi-quantum-well waveguides, which include InGaAsP wells and InP barriers: coupling loss to a tapered-lensed single-mode fibre as low as 0.5 dB and excess loss of 1.8 dB are featured. Couplers fabricated with this waveguide structure have a balance sensitivity of 0.03 to 0.04 dB per nanometer.A moderately diluted multi-quantum-well 3-dB coupler has been permanently pigtailed and butt-coupled to a dual balanced PIN photoreceiver. This hybrid assembly was tested in a coherent transmission system at 155 and 622 Mbits^-1 showing sensitivities, for 10^-9 BER, of about-38.0 dBm and-28.8 dBm, respectively.     

Photoinitiated substitution reactions of 2 and 4-pyridinecarbonitrile with cyclopentene

The photoreactions of 4 and 2-pyridinecarbonitrile with cyclopentene carried out in acetone or in acetonitrile solutions lead, respectively, to 4-(2 cyclopentenyl)-pyridine $\text{1}$ and 2-(2 cyclopentenyl)pyridine $\text{2}$. From 2-pyridinecarbonitrile a little amount of ketone $\text{3}$ is obtained.     

Synthesis of non-agglomerated Ba<Subscript>0.77</Subscript>Ca<Subscript>0.23</Subscript>TiO<Subscript>3</Subscript> nanopowders by a modified polymeric precursor method

In this work, we have studied the influence of the pH on the synthesis and structural properties of the Ba_0.77Ca_0.23TiO₃ nanopowders synthesized by a modified polymeric precursor method, in order to achieve non-agglomerated powders. Synthesis, morphology, thermal reactions, crystallite and average particle size of the synthesized powders were investigated through thermal analysis (DTA/TG), X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM) and Infrared spectroscopy. In summary, Ba_0.77Ca_0.23TiO₃ nanopowders were synthesized for the first time at a relative low temperature (500 °C). It was also found that the alkalinity and acidity of the solution presented a great influence on the powder properties. The best results were obtained from solutions with pH = 8.5 and 11 whose nanopowders presented weakly agglomerate, with homogeneous particle size and a narrow size distribution (30–40 nm). This behavior could be explained based on the FT-IR results in which it was possible to see the increased of the chelation in higher pHs.     

Second-generation mimics of ganglioside GM1 oligosaccharide: a three-dimensional view of their interactions with bacterial enterotoxins by NMR and computational methods

As a step to delineate a strategy of ligand design for cholera toxin (CT), NMR studies were performed on several mimics of the GM1 ganglioside oligosaccharide. The conformation of these analogues was investigated first in solution and then upon binding to cholera toxin by transferred nuclear Overhauser effect (TR-NOE) measurements. It was demonstrated that CT selects a conformation similar to the global minima of the free saccharides from the ensemble of presented conformations. No evidence of major conformational distortions was obtained, but one or two of the available conformers of the hydroxyacid side chain appear to be selected in the bound state. The NMR data were interpreted with the aid of computer models, generated and analyzed by using a combination of different approaches (MacroModels' MC/EM and MC/SD, Autodock, and GRID). Analysis of the NMR data supported by computational studies allowed us to interpret the experimental observations and to derive workable models of the ligand:toxin complexes. These models suggest that the higher affinity of the (R)-lactic acid derivative 3 may stem from lipophilic interactions with a hydrophobic area in the toxin binding site located in the vicinity of the sialic acid side chain binding region of the CT:GM1 complex, and formed by the side chain of Ile-58 and Lys-34. Thus, the models obtained have allowed us to make useful design suggestions for the improvement of ligand affinity.     

Rheological behavior and structural interpretation of waxy crude oil gels

A waxy crude oil which gels below a threshold temperature has been investigated under static and dynamic conditions, using a combination of rheological methods, optical microscopy, and DSC. Particular attention is given in this work to the influence of the mechanical history on gel strength and to describing the time-dependent rheological behavior. The gels display a strong dependence of the yield stress and moduli on the shear history, cooling rate, and stress loading rate. Of particular interest is the partial recovery of the gel structure after application of small stress or strain (much smaller than the critical values needed for flow onset) during cooling, which can be used to reduce the ultimate strength of the crude oil gel formed below the pour point. A second focus of this study is to further develop the physical interpretation of the mechanism by which wax crystallization produces gelation. Gelation of the waxy crude oil studied is suggested to be the result of the association between wax crystals, which produces an extended network structure, and it is shown that the system displays features common to attractive colloidal gels, for one of which, fumed silica (Aerosil 200) in paraffin oil, rheological data are reported. The colloidal gel model provides a simple and economical basis for explaining the response of the gelled oil to various mechanical perturbations and constitutes a fruitful basis from which to develop technologies for controlling the gelation phenomenon, as suggested by the rheological results reported.     

A synthetic divalent cholera toxin glycocalix[4]arene ligand having higher affinity than natural GM1 oligosaccharide

A high-affinity ligand of cholera toxin, the divalent glycocalix[4]arene 1, was obtained by exploiting a combination of structure-based design of glycomimetic monovalent ligands and affinity enhancements by multivalent presentation through a calix[4]arene scaffold. It exhibits a slightly higher affinity for the toxin than its natural ligand, the GM1 oligosaccharide.     

Solvent effects in the reaction of 2-thiophenesulfonyl chloride with aniline

The second order rate constants k₂ and the activation parameters for the reaction of 2-thiophenesulfonyl chloride with aniline together with solution enthalpies of the reactants have been measured in methanol, ethanol, 2-propanol, acetonitrile and acetone. The reaction rates are slower in dipolar aprotic solvents than in protic ones due to a remarkable activation negative entropy. The rate constants k₂ are correlated with empirical solvent polarity parameters. The data seem in accord with a S_AN reaction mechanism.     

Dimer asymmetry in superoxide dismutase studied by molecular dynamics simulation

Summary Molecular dynamics (MD) simulations of 100 ps have been carried out to study the active-site behaviour of the Cu,Zn superoxide dismutase dimer (SOD) in water. The active site of each subunit was monitored during the whole simulation by calculating the distances between functional residues and the catalytic copper. The results indicate that charge orientation is maintained at each active site but the solvent accessibility varies. Analysis of the MD simulation, carried out by using the atomic displacement covariance matrix, has shown a different intra-subunit correlation pattern for the two monomers and the presence of inter-subunit correlations. The MD simulation presented here indicates an asymmetry in the two active sites and different dynamic behaviour of the two SOD subunits.