Encapsulation of porphyrins and chlorins in biodegradable nanoparticles: the effect of dye lipophilicity on the extravasation and the photothrombic activity. A comparative study

In the present work, we performed a preclinical inter-comparison study using several photosensitizers with the goal of optimizing photodynamic therapy (PDT) for the treatment of choroidal neovascularization (CNV) associated with age-related macular degeneration. The tested molecules were the porphyrins meso-tetraphenylporphyrin (TPP) and meso-tetra-(4-carboxyphenyl)-porphyrin (TCPP), and the chlorins pheophorbide-a (Pheo-a) and chlorin e(6) (Ce(6)). Each of these molecules was entrapped in biodegradable nanoparticles (NP) based on poly(d,l-lactic acid). The influence of the degree of lipophilicity on the incorporation efficiency of the drug in the NPs, and on the dye leakage from blood vessels as well as on the photothrombic efficiency was investigated using the chick chorioallantoic membrane (CAM) as in vivo model. NP characterization showed that the dye was more effectively entrapped in the polymeric matrix when its degree of lipophilicity increased. While less lipophilic compounds (TCPP, Ce(6)) extravasate rather easily, the more lipophilic dyes (TPP, Pheo-a) tend to remain inside the blood vessels. After injection of a drug dose of 1 mg/kg body weight and a drug-light application interval of 1 min, irradiation with light doses ranging from 5 to 20 J/cm(2) led to the highest photothrombic efficiency when using the NPs loaded with the most lipophilic molecule (TPP). The latter induced vascular damage, which was significantly higher than that observed with the other molecules tested. Thus, in addition to minimal leakage from blood vessels, the TPP in NP formulation exhibited photothrombic efficiency similar to Visudyne which was also tested in the CAM model.     

Synthesis, structure, and characterization of new mononuclear Mn(II) complexes. Electrochemical conversion into new oxo-bridged Mn(2)(III,IV) complexes. Role of chloride ions

Two Mn(II) complexes are isolated and X-ray characterized, namely, cis-[(L(2))Mn(II)(Cl)(2)] (1) and [(L(3))Mn(II)Cl(OH(2))](ClO(4)) (2(ClO(4))), where L(2) and L(3) are the well-known tetradentate N,N'-dimethyl-N,N'-bis(2-pyridylmethyl)ethane-1,2-diamine and N,N'-dimethyl-N,N'-bis(2-pyridylmethyl)propane-1,3-diamine ligands, respectively. The crystal structure reveals that whereas the ligand L(2) is in the cis-alpha conformation in complex 1, the ligand L(3) is in the more unusual cis-beta conformation in 2. EPR spectra are recorded on frozen solutions for both complexes and are characteristic of Mn(II) species. Electrochemical behaviors are investigated on acetonitrile solution for both complexes and show that cation 2 exists as closely related Mn(II) species in equilibrium. For both complexes exhaustive bulk electrolyses of acetonitrile solution are performed at oxidative potential in various experimental conditions. In the presence of 2,6-lutidine and after elimination of chloride ligands, the formation of the di-mu-oxo mixed-valent complexes [(L(2))Mn(III)(mu-O)(2)Mn(IV)(L(2))](3+) (3a) and [(L(3))Mn(III)(mu-O)(2)Mn(IV)(L(3))](3+) (4) is confirmed by UV-vis and EPR spectroscopies and cyclic voltammetry. In addition crystals of 4(ClO(4))(3) were isolated, and the X-ray structure reveals the cis-alphaconformation of L(3). In the absence of 2,6-lutidine and without elimination of the exogenous chloride ions, the electrochemical oxidation of 1 leads to the formation of the mononuclear Mn(III) complex, namely, [(L(2))Mn(III)(Cl)(2)](+) (5), as confirmed by UV-vis as well as parallel mode EPR spectroscopy and cyclic voltammetry. In the same conditions, the electrochemical oxidation of complex 2 is more intricate, and a thorough analysis of EPR spectra establishes the formation of the binuclear mono-mu-oxo mixed-valent [(L(3))ClMn(III)(mu-O)Mn(IV)Cl(L(3))](3+) (6) complexes. Electrochemical conversion of Mn(II) complexes into mixed-valent Mn(2)(III,IV) oxo-bridged complexes in the presence of 2,6-lutidine is discussed. The role of the chloride ligands as well as that of L(3) in the building of oxo bridges is discussed. Differences in behavior between L(2) and L(3) are commented on.     

Collective behavior of Franck-Condon excited states and energy transfer in DNA double helices

Absorption of UV radiation by DNA bases is known to induce carcinogenic mutations. The lesion distribution depends on the sequence around the hotspots, suggesting cooperativity between bases. Here we show that such cooperativity may intervene at the very first step of a cascade of events by formation of Franck-Condon states delocalized over several bases and subsequent energy transfer faster than 100 fs. Our study focuses on the double helix poly(dA).poly(dT), whose fluorescence, induced by femtosecond pulses at 267 nm, is probed by the upconversion technique and time-correlated single photon counting, over a large time domain (100 fs to 100 ns). The time-resolved fluorescence decays and fluorescence anisotropy decays are discussed in relation with the steady-state absorption and fluorescence spectra in the frame of exciton theory.     

Tuning the Regioselective Functionalization of Trifluoromethylated Dienes via Lanthanum-Mediated Single C−F Bond Activation

The development of new fluorine-containing building blocks and their efficient synthetic access is currently a challenging research field. Herein, the highly regio- and stereoselective addition of a large range of aldehydes onto trifluoromethylated benzofulvenes was achieved using a simple La/I₂/DIBAL-Cl system via a selective C−F bond activation process. This versatile methodology provided homodienyl alcohols bearing a terminal CF₂-alkene with potential further applications, as shown by the dehydration to the first benzofulvenes carrying a difluorovinyl group. In addition, for certain electron-poor aldehydes, unprecedented ipso substitution of the CF₃ group in a diene was observed, which, according to DFT studies, is related to the presence of the large, Lewis-acidic lanthanum metal.     

Signal modelization for improved precision of assessment of minimum and mean telomere lengths

Telomere length is an important measure of cell and tissue regenerative capacities. The mean telomere length is classically used as global indicator of a tissue telomere length. In skeletal muscle, which is made of postmitotic myonuclei and satellite cells (muscle stem cells), minimum telomere length is also used to assess the telomere length of satellite cells and newly incorporated myonuclei. At present, the estimation of the method reproducibility during the assessment of mean and minimum telomere length using Southern blot analysis has never been documented. The aim of this report is to describe a signal modelization for improved precision of assessment of minimum and mean telomere lengths and to document the method reproducibility. Telomeres are assessed using a Southern technique where the gel is directly hybridized with the specific probe without the membrane-transferring step in order to prevent telomeric low signal loss. We found that the improved signal analysis for determination of telomere length is associated with coefficients of variation ranging from 1.37 to 4.29% for the mean telomeric restriction fragment (TRF) length and from 2.04 to 4.95% for the minimum TRF length. Improved method reproducibility would allow saving time and biological material as duplicate and triplicate measurement of the same sample is no longer required.     

Efficient Access to Deuterated and Tritiated Nucleobase Pharmaceuticals and Oligonucleotides using Hydrogen‐Isotope Exchange

A general approach for the efficient hydrogen‐isotope exchange of nucleobase derivatives is described. Catalyzed by ruthenium nanoparticles, using mild reaction conditions, and involving either D₂ or T₂ as isotopic sources, this reaction possesses a wide substrate scope and a high solvent tolerability. This novel method facilitates the access to essential diagnostic tools in drug discovery and development: tritiated pharmaceuticals with high specific activities and deuterated oligonucleotides suitable for use as internal standards during LC‐MS quantification.     

UV-induced bursting of cell-sized multicomponent lipid vesicles in a photosensitive surfactant solution

We study the behavior of multicomponent giant unilamellar vesicles (GUVs) in the presence of AzoTAB, a photosensitive surfactant. GUVs are made of an equimolar ratio of dioleoylphosphatidylcholine (DOPC) and dipalmitoylphosphatidylcholine (DPPC) and various amounts of cholesterol (Chol), where the lipid membrane shows a phase separation into a DPPC-rich liquid-ordered (L(o)) phase and a DOPC-rich liquid-disordered (L(d)) phase. We find that UV illumination at 365 nm for 1 s induces the bursting of a significant fraction of the GUV population. The percentage of UV-induced disrupted vesicles, called bursting rate (Y(burst)), increases with an increase in [AzoTAB] and depends on [Chol] in a non-monotonous manner. Y(burst) decreases when [Chol] increases from 0 to 10 mol % and then increases with a further increase in [Chol], which can be correlated with the phase composition of the membrane. We show that Y(burst) increases with the appearance of solid domains ([Chol] = 0) or with an increase in area fraction of L(o) phase (with increasing [Chol] ≥ 10 mol %). Under our conditions (UV illumination at 365 nm for 1 s), maximal bursting efficiency (Y(burst) = 53%) is obtained for [AzoTAB] = 1 mM and [Chol] = 40 mol %. Finally, by restricting the illumination area, we demonstrate the first selective UV-induced bursting of individual target GUVs. These results show a new method to probe biomembrane mechanical properties using light as well as pave the way for novel strategies of light-induced drug delivery.     

Batch profiling calibration for robust NMR metabonomic data analysis

Metabonomic studies involve the analysis of large numbers of samples to identify significant changes in the metabolic fingerprints of biological systems, possibly with sufficient statistical power for analysis. While procedures related to sample preparation and spectral data acquisition generally include the use of independent sample batches, these might be sources of systematic variation whose effects should be removed to focus on phenotyping the relevant biological variability. In this work, we describe a grouped-batch profile (GBP) calibration strategy to adjust nuclear magnetic resonance (NMR) metabolomic data-sets for batch effects either introduced during NMR experiments or samples work-up. We show how this method can be applied to data calibration in the context of a large-scale NMR epidemiological study where quality control samples are available. We also illustrate the efficiency of a batch profile correction for NMR metabonomic investigation of cell extracts, where GBP can significantly improve the predictive power of multivariate statistical models for discriminant analysis of the cell infection status. The method is applicable to a broad range of NMR metabolomic/metabonomic cohort studies.     

Electrodes based on zeolites modified with cobalt and/or molybdenum for pesticide degradation: part II—2,4,6-trichlorophenol degradation

Journal of Solid State Electrochemistry - 2,4,6-trichlorophenol (TCP) is a persistent pollutant introduced in water by industrial processes and pesticides. We have studied the electrooxidation of...     

Hydrogen Isotope Exchange Catalyzed by Ru Nanocatalysts: Labelling of Complex Molecules Containing N-Heterocycles and Reaction Mechanism Insights

Ruthenium nanocatalysis can provide effective deuteration and tritiation of oxazole, imidazole, triazole and carbazole substructures in complex molecules using D₂ or T₂ gas as isotopic sources. Depending on the substructure considered, this approach does not only represent a significant step forward in practice, with notably higher isotope uptakes, a broader substrate scope and a higher solvent applicability compared to existing procedures, but also the unique way to label important heterocycles using hydrogen isotope exchange. In terms of applications, the high incorporation of deuterium atoms, allows the synthesis of internal standards for LC-MS quantification. Moreover, the efficacy of the catalyst permits, even under subatmospheric pressure of T₂ gas, the preparation of complex radiolabeled drugs owning high molar activities. From a fundamental point of view, a detailed DFT-based mechanistic study identifying undisclosed key intermediates, allowed a deeper understanding of C−H (and N−H) activation processes occurring at the surface of metallic nanoclusters.