Roughness reduction in submicron waveguides by low-molecular weight development

Roughness reduction of a submicron waveguide profile in chemically amplified negative resist is here performed by proper selection of an alkali-based developer, taking into account that its smaller molecules lead to smoother resist surface by altering the developing mechanism of aggregate extraction performed with standard quaternary ammonium hydroxide. Roughness is then analyzed by means of classical Atomic Force Microscope inspection; furthermore, a non-invasive line edge roughness analysis approach based on top-down scanning electron microscope acquisition gives comparable results, in terms of standard deviation and molecular aggregate periodicity.     

Nickel-Ruthenium Mixed-Metal Carbonyl Clusters Syntheses and Solid State Structures of the Two Tetrahedral Clusters [PPh4][NiRu3(μ3 H)(CO)9(μ-CO)3] and [NEt4]2[NiRu3(CO)8(μ-CO)4]

Redox condensation of [Ru₃H(CO)₁₁]- with Ni(CO)₄, in tetrahydrofuran solution, under a nitrogen atmosphere, yields the tetranuclear anion [NiRu_H(CO)₁₁)-. Subsequent deprotonation with Bu'OK in acetonitrile solution leads to the formation of the related dianion. Both anions have been characterized by spectroscopic techniques, elemental analysis and single crystal X-ray diffraction. [PPh₄][NiRu₃H(CO)₁₂] crystallizes in the triclinic space group PI with unit cell dimensionsof a = 11.842(2) Å,b = 12.335(3) Å, c = 13.3080) Å,a = 91.89(2)°, = 93.35(1)°,y = 96.41(2)°, Z = 2, V= 1926.9(7) Å'. The NiRu₃, metal core of the molecule defines a distorted tetrahedron with nine terminal and three edge bridging carbonyl groups. The hydrido ligand was located by difference Fourier techniques and was found to bridge the NiRu₂ basal triangle at a distance of 0.88(6) A from this plane. Selected average distances and angles are: Ru-Ru = 2.839 Å, Ru-Ni = 2.640 Å, Ru-C, = 1.910 A,Ru-C _b = 2.084 Å, Ni-C _b = 2.022 Å, Ru-H = 1.77 Å, C-0, = 1.135 Å, C-O _b = 1.159 Å, M-C-O, = 176.3°,M-C--O _b = 139.3°;other distances are: Ni-C₁ = l.758(7) Å, Ni-H= 1.85(7) Å. [NEt₄]₂[NiRu₃(CO)₁₂] crystallizes in the orthorhombic space group Pnma (no. 62) with unit cell dimensions ofa=20.247(5) Å,b = 15.038(4)Å,c = 12.079(3) Å, Z=4, V=3678(2) A'. The molecule contains a tetrahedral NiRu₃ core with eight terminal and four edge bridging carbon monoxide groups which bridge the three Ni-Ru and one Ru-Ru bond. Average distances and angles are: Ru -Ru =2.3050A Ru-Ni 2.648 Å, Ru-C _t = 1.878 Å, Ru-C _b 2.045 Å, Ni-C _b = 2.055 Å, C-O _t = 1.145 Å, C-01,=1.157 Å, M-C-O,= 176.9°, M-C-O _b = 138.6°; other distance is: Ni-C _t = 1.754(10) Å,t = terminal,b = bridging.     

Toward efficient Zn(II)-based artificial nucleases

A series of cis-cis-triaminocyclohexane Zn(II) complex-anthraquinone intercalator conjugates, designed in such a way to allow their easy synthesis and modification, have been investigated as hydrolytic cleaving agents for plasmid DNA. The ligand structure comprises a triaminocyclohexane platform linked by means of alkyl spacers of different length (from C(4) to C(8)) to the anthraquinone group which may intercalate the DNA. At a concentration of 5 microM, the complex of the derivative with a C(8) alkyl spacer induces the hydrolytic stand scission of supercoiled DNA with a rate of 4.6 x 10(-6) s(-1) at pH 7 and 37 degrees C. The conjugation of the metal complex with the anthraquinone group leads to a 15-fold increase of the cleavage efficiency when compared with the anthraquinone lacking Zn-triaminocyclohexane complex. The straightforward synthetic procedure employed, allowing a systematic change of the spacer length, made possible to gain more insight on the role of the intercalating group in determining the reactivity of the systems. Comparison of the reactivity of the different complexes shows a remarkable increase of the DNA cleaving efficiency with the length of the spacer. In the case of too-short spacers, the advantages due to the increased DNA affinity are canceled due to the incorrect positioning of the reactive group, thus leading to cleavage inhibition.     

Adsorption-penetration studies of glucose oxidase into phospholipid monolayers at the 1,2-dichloroethane/water interface.

The interaction between glucose oxidase (GOx) and phospholipid monolayers is studied at the 1,2-dichloroethane/water interface by electrochemical impedance spectroscopy. Electrochemical experiments show that the presence of GOx induces changes in the capacitance curves at both negative and positive potentials, which are successfully explained by a theoretical model based on the solution of the Poisson-Boltzmann equation. These changes are ascribed to a reduced partition coefficient of GOx and an increase of the permittivity of the lipid hydrocarbon domain. Our results show that the presence of lipid molecules enhances the adsorption of GOx molecules at the liquid/liquid interface. At low lipid concentrations, the adsorption of GOx is probably the first step preceding its penetration into the lipid monolayer. The experimental results indicate that GOx penetrates better and forms more stable monolayers for lipids with longer hydrophobic tails. At high GOx concentrations, the formation of multilayers is observed. The phenomenon described here is strongly dependent on 1) the GOx and lipid concentrations, 2) the nature of the lipid, and 3) the potential drop across the interface.     

Co60 γ-radiation-induced copolymerization of ethylene and carbon monoxide

The γ-radiation-induced free-radical copolymerization of ethylene and CO has been investigated over a wide range of pressure, initial gas composition, radiation intensity, and temperature. At 20°C., concentrations of CO up to 1% retard the polymerization of ethylene. Above this concentration the rate reaches a maximum between 27.5 and 39.2% CO and then decreases. The copolymer composition increases only from 40 to 50% CO when the gas mixture is varied from 5 to 90% CO. A relatively constant reactivity ratio is obtained at 20°C., indicating that CO adds 23.6 times as fast as an ethylene monomer to an ethylene free-radical chain end. For a 50% CO gas mixture, the above value of 23.6 and the copolymerization rate decrease with increasing temperature to 200°C. The kinetic data indicate a temperature-dependent depropagation reaction. Infrared examination of copolymers indicates a polyketone structure containing ? CH₂? CH₂? and ? CO? units. The crystalline melting point increases rapidly from 111 to 242°C., as the CO concentration in the copolymer increases from 27 to 50%. Molecular weight of copolymer formed at 20°C. increased with increasing CO, indicating M?_n values >20,000. Increasing reaction temperature results in decreasing molecular weight. Onset of decomposition for a 50% CO copolymer was measured at ≈250°C.     

Synthesis, structure and conformation of partially-modified retro- and retro-inverso psi[NHCH(CF3)]Gly peptides

Partially modified retro- (PMR) and retro-inverso (PMRI) psi[NHCH(CF(3))]Gly peptides, a conceptually new class of peptidomimetics, have been synthesized in wide structural diversity and variable length by aza-Michael reaction of enantiomerically pure alpha-amino esters and peptides with enantiomerically and geometrically pure N-4,4,4-trifluorocrotonoyl-oxazolidin-2-ones. The factors underlying the observed moderate to good diastereocontrol have been investigated. The conformations of model PMR-psi[NHCH(CF(3))]Gly tripeptides have been studied in solution by (1)H NMR spectroscopy supported by MD calculations, as well as in the solid-state by X-ray diffraction. Remarkable stability of turn-like conformations, comparable to that of parent malonyl-based retropeptides, was evidenced, as a likely consequence of two main factors: 1) severe torsional restrictions about sp(3) bonds in the [CO-CH(2)-CH(CF(3))-NH-CH(R)-CO] module, which is biased by the stereoelectronically demanding CF(3) group and the R side chain; 2) formation of nine-membered intramolecularly hydrogen-bonded rings, which have been clearly detected both in CHCl(3) solution and in some crystal structures. The former factor seems to be more important, as turn-like conformations were found in the solid-state even in the absence of intramolecular hydrogen bonding. The relative configuration of the -C*H(CF(3))NHC*H(R)- stereogenic centers has a major effect on the stability of the turn-like conformation, which seems to require a syn stereochemistry. X-ray diffraction and ab initio computational studies showed that the [-CH(CF(3))NH-] group can be seen as a sort of hybrid between a peptide bond mimic and a proteolytic transition state analogue, as it combines some of the properties of a peptidyl -CONH- group (low NH basicity, CH(CF(3))-NH-CH backbone angle close to 120 degrees, C-CF(3) bond substantially isopolar with the C=O) with some others of the tetrahedral intermediate [-C(OX)(O(-))NH-] involved in the protease-mediated hydrolysis reaction of a peptide bond (high electron density on the CF(3) group, tetrahedral backbone carbon).     

A novel application of the Diels-Alder reaction: nitronaphthalenes as normal electron demand dienophiles

Thermal reactions between nitronaphthalenes and butadienes were studied. It was demonstrated that these reactions are capable of undergoing the normal electron demand Diels-Alder reaction, with a variety of dienes affording the phenanthrene derivatives. The influence of the extension and type of substitution was also discussed. When the electron-withdrawing activation of the naphthalenic nucleus or the donor properties of the dienes were not enough, N-naphthylpyrroles were detected as main product, suggesting that a competitive reaction would probably take place. The results clearly confirmed the dienophilic nature of nitronaphthalenic double bonds and provided an alternative procedure for phenanthrene derivatives and N-naphthylpyrroles' synthesis. The relative reactivity of the reactants and the viability of the reactions were discussed from a theoretical point of view.